[PATCH v2 3/3] mmc: hi6220_dw_mmc: add fifoth_val to private data and set it in .probe

[Jaehoon Chung]

Hi,

> -----Original Message-----
> From: Yang Xiwen <forbidden405 at outlook.com>
> Sent: Wednesday, April 3, 2024 10:22 AM
> To: Jaehoon Chung <jh80.chung at samsung.com>; Peng Fan <peng.fan at nxp.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [PATCH v2 3/3] mmc: hi6220_dw_mmc: add fifoth_val to private data and set it in .probe
> 
> On 4/3/2024 8:43 AM, Jaehoon Chung wrote:
> > Hi
> >
> > On 2/1/24 23:05, Yang Xiwen via B4 Relay wrote:
> >> From: Yang Xiwen <forbidden405 at outlook.com>
> >>
> >> The value defaults to 0 and is ignored by dw_mmc code, so the other
> >> users are not affected.
> >>
> >> Setting this explicitly fixes some weird reading error found on Hi3798MV200.
> >>
> >> Fixes: 8a5dc8140e62 ("mmc: hi6220_dw_mmc: add compatible for HC2910 support")
> >>
> >> Signed-off-by: Yang Xiwen <forbidden405 at outlook.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

> >> ---
> >>   drivers/mmc/hi6220_dw_mmc.c | 11 ++++++++++-
> >>   1 file changed, 10 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/mmc/hi6220_dw_mmc.c b/drivers/mmc/hi6220_dw_mmc.c
> >> index a4b8072976..dc0210402b 100644
> >> --- a/drivers/mmc/hi6220_dw_mmc.c
> >> +++ b/drivers/mmc/hi6220_dw_mmc.c
> >> @@ -37,6 +37,7 @@ struct hi6220_dwmmc_priv_data {
> >>   struct hisi_mmc_data {
> >>   	unsigned int clock;
> >>   	bool use_fifo;
> >> +	u32 fifoth_val;
> >>   };
> >>
> >>   static int hi6220_dwmmc_of_to_plat(struct udevice *dev)
> >> @@ -125,6 +126,7 @@ static int hi6220_dwmmc_probe(struct udevice *dev)
> >>   	host->mmc = &plat->mmc;
> >>
> >>   	host->fifo_mode = mmc_data->use_fifo;
> >> +	host->fifoth_val = mmc_data->fifoth_val;
> >>   	host->mmc->priv = &priv->host;
> >>   	upriv->mmc = host->mmc;
> >>   	host->mmc->dev = dev;
> >> @@ -154,13 +156,20 @@ static const struct hisi_mmc_data hi6220_mmc_data = {
> >>   	.use_fifo = false,
> >>   };
> >>
> >> +static const struct hisi_mmc_data hi3798mv2x_mmc_data = {
> >> +	.clock = 50000000,
> >> +	.use_fifo = false,
> >> +	// FIFO depth is 256
> > Removed unnecessary comment.
> 
> 
> Will do. It seems that this should also apply to hi3798cv200-dw-mshc.
> tests are needed from cv200 users.

In future, It can be removed. Others looks good to me.

Best Regards,
Jaehoon Chung

> 
> 
> >
> > Best Regards,
> > Jaehoon Chung
> >
> >> +	.fifoth_val = MSIZE(4) | RX_WMARK(0x7f) | TX_WMARK(0x80),
> >> +};
> >> +
> >>   static const struct udevice_id hi6220_dwmmc_ids[] = {
> >>   	{ .compatible = "hisilicon,hi6220-dw-mshc",
> >>   	  .data = (ulong)&hi6220_mmc_data },
> >>   	{ .compatible = "hisilicon,hi3798cv200-dw-mshc",
> >>   	  .data = (ulong)&hi6220_mmc_data },
> >>   	{ .compatible = "hisilicon,hi3798mv200-dw-mshc",
> >> -	  .data = (ulong)&hi6220_mmc_data },
> >> +	  .data = (ulong)&hi3798mv2x_mmc_data },
> >>   	{ .compatible = "hisilicon,hi3660-dw-mshc",
> >>   	  .data = (ulong)&hi3660_mmc_data },
> >>   	{ }
> 
> 
> --
> Regards,
> Yang Xiwen