[PATCH] ARM: stm32: Drop superfluous Makefile entry for ecdsa_romapi.o

[Patrice CHOTARD]

On 4/14/24 20:38, Marek Vasut wrote:
> The source file is in arch/arm/mach-stm32mp/ecdsa_romapi.c and not
> in arch/arm/mach-stm32mp/stm32mp1/ecdsa_romapi.c . There are two
> Makefile entries in each subdirectory. Drop the bogus one and keep
> only the correct one, the one in arch/arm/mach-stm32mp/Makefile .
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Igor Opaniuk <igor.opaniuk at foundries.io>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: Simon Glass <sjg at chromium.org
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: u-boot at dh-electronics.com
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  arch/arm/mach-stm32mp/stm32mp1/Makefile | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm/mach-stm32mp/stm32mp1/Makefile b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> index 857148747ef..ebae50f66c9 100644
> --- a/arch/arm/mach-stm32mp/stm32mp1/Makefile
> +++ b/arch/arm/mach-stm32mp/stm32mp1/Makefile
> @@ -8,7 +8,6 @@ obj-y += cpu.o
>  obj-$(CONFIG_STM32MP13X) += stm32mp13x.o
>  obj-$(CONFIG_STM32MP15X) += stm32mp15x.o
>  
> -obj-$(CONFIG_STM32_ECDSA_VERIFY) += ecdsa_romapi.o
>  ifdef CONFIG_SPL_BUILD
>  obj-y += spl.o
>  obj-y += tzc400.o


Hi Marek

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice