[PATCH 2/3] clk/qcom: ipq4019: return valid rate when setting UART clock

Caleb Connolly caleb.connolly at linaro.org
Mon Apr 15 14:44:21 CEST 2024


clk_set_rate() should return the clock rate that was set. The IPQ4019
clock driver doesn't set any rates yet but it should still return the
expected value so that drivers can work properly.

For a baud rate of 115200 with an expected bit clock divisor of 16, the
clock rate should be 1843200 so return that frequency.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 drivers/clk/qcom/clock-ipq4019.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c
index d693776d339d..72f235eab212 100644
--- a/drivers/clk/qcom/clock-ipq4019.c
+++ b/drivers/clk/qcom/clock-ipq4019.c
@@ -20,9 +20,9 @@ static ulong ipq4019_clk_set_rate(struct clk *clk, ulong rate)
 {
 	switch (clk->id) {
 	case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/
 		/* This clock is already initialized by SBL1 */
-		return 0;
+		return 1843200;
 	default:
 		return -EINVAL;
 	}
 }

-- 
2.44.0



More information about the U-Boot mailing list