[PATCH u-boot-mvebu 04/10] ddr: marvell: a38x: debug: Allow compiling with immutable debug settings to reduce binary size
Marek Behún
kabel at kernel.org
Mon Apr 15 18:30:37 CEST 2024
Allow compiling with immutable debug settings:
- DEBUG_LEVEL is always set to DEBUG_LEVEL_ERROR
- register dumps are disabled
This can save around 10 KiB of space in the resulting binary, which is a
lot in U-Boot SPL.
Signed-off-by: Marek Behún <kabel at kernel.org>
---
arch/arm/mach-mvebu/Kconfig | 10 +++++++
drivers/ddr/marvell/a38x/ddr3_debug.c | 9 ++++--
drivers/ddr/marvell/a38x/ddr3_init.c | 3 +-
drivers/ddr/marvell/a38x/ddr3_init.h | 42 ++++++++++++++++++++++-----
4 files changed, 53 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index f15d3cc5ed..a320793a30 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -250,6 +250,16 @@ config DDR_LOG_LEVEL
At level 3, rovides the windows margin of each DQ as a results of
DQS centeralization.
+config DDR_IMMUTABLE_DEBUG_SETTINGS
+ bool "Immutable DDR debug level (always DEBUG_LEVEL_ERROR)"
+ depends on ARMADA_38X
+ help
+ Makes the DDR training code debug level settings immutable.
+ The debug level setting from board topology definition is ignored.
+ The debug level is always set to DEBUG_LEVEL_ERROR and register
+ dumps are disabled.
+ This can save around 10 KiB of space in SPL binary.
+
config DDR_RESET_ON_TRAINING_FAILURE
bool "Reset the board on DDR training failure instead of hanging"
depends on ARMADA_38X || ARMADA_XP
diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c
index d32d42c408..0b65168d82 100644
--- a/drivers/ddr/marvell/a38x/ddr3_debug.c
+++ b/drivers/ddr/marvell/a38x/ddr3_debug.c
@@ -7,18 +7,21 @@
#include "mv_ddr_training_db.h"
#include "mv_ddr_regs.h"
+#if !defined(CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS)
u8 is_reg_dump = 0;
u8 debug_pbs = DEBUG_LEVEL_ERROR;
+#endif
/*
* API to change flags outside of the lib
*/
-#if defined(SILENT_LIB)
+#if defined(SILENT_LIB) || defined(CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS)
void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level)
{
/* do nothing */
}
-#else /* SILENT_LIB */
+#else /* !SILENT_LIB && !CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS */
+
/* Debug flags for other Training modules */
u8 debug_training_static = DEBUG_LEVEL_ERROR;
u8 debug_training = DEBUG_LEVEL_ERROR;
@@ -104,7 +107,7 @@ void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level)
#endif /* CONFIG_DDR4 */
}
}
-#endif /* SILENT_LIB */
+#endif /* !SILENT_LIB && !CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS */
#if defined(DDR_VIEWER_TOOL)
static char *convert_freq(enum mv_ddr_freq freq);
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c
index 27eb3ac173..7c5147f474 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.c
+++ b/drivers/ddr/marvell/a38x/ddr3_init.c
@@ -41,7 +41,8 @@ int ddr3_init(void)
mv_ddr_pre_training_soc_config(ddr_type);
/* Set log level for training library */
- mv_ddr_user_log_level_set(DEBUG_BLOCK_ALL);
+ if (!IS_ENABLED(CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS))
+ mv_ddr_user_log_level_set(DEBUG_BLOCK_ALL);
mv_ddr_early_init();
diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h
index 9288073a78..b513a13c53 100644
--- a/drivers/ddr/marvell/a38x/ddr3_init.h
+++ b/drivers/ddr/marvell/a38x/ddr3_init.h
@@ -45,15 +45,46 @@ enum log_level {
#define MISL_PHY_ODT_N_OFFS 0x0
/* Globals */
-extern u8 debug_training, debug_calibration, debug_ddr4_centralization,
- debug_tap_tuning, debug_dm_tuning;
+#if defined(CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS)
+static const u8 is_reg_dump = 0;
+static const u8 debug_training_static = DEBUG_LEVEL_ERROR;
+static const u8 debug_training = DEBUG_LEVEL_ERROR;
+static const u8 debug_leveling = DEBUG_LEVEL_ERROR;
+static const u8 debug_centralization = DEBUG_LEVEL_ERROR;
+static const u8 debug_training_ip = DEBUG_LEVEL_ERROR;
+static const u8 debug_training_bist = DEBUG_LEVEL_ERROR;
+static const u8 debug_training_hw_alg = DEBUG_LEVEL_ERROR;
+static const u8 debug_training_access = DEBUG_LEVEL_ERROR;
+static const u8 debug_training_device = DEBUG_LEVEL_ERROR;
+static const u8 debug_pbs = DEBUG_LEVEL_ERROR;
+
+static const u8 debug_tap_tuning = DEBUG_LEVEL_ERROR;
+static const u8 debug_calibration = DEBUG_LEVEL_ERROR;
+static const u8 debug_ddr4_centralization = DEBUG_LEVEL_ERROR;
+static const u8 debug_dm_tuning = DEBUG_LEVEL_ERROR;
+#else /* !CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS */
extern u8 is_reg_dump;
+extern u8 debug_training_static;
+extern u8 debug_training;
+extern u8 debug_leveling;
+extern u8 debug_centralization;
+extern u8 debug_training_ip;
+extern u8 debug_training_bist;
+extern u8 debug_training_hw_alg;
+extern u8 debug_training_access;
+extern u8 debug_training_device;
+extern u8 debug_pbs;
+
+extern u8 debug_tap_tuning;
+extern u8 debug_calibration;
+extern u8 debug_ddr4_centralization;
+extern u8 debug_dm_tuning;
+#endif /* !CONFIG_DDR_IMMUTABLE_DEBUG_SETTINGS */
+
extern u8 generic_init_controller;
/* list of allowed frequency listed in order of enum mv_ddr_freq */
extern u32 is_pll_old;
extern struct pattern_info pattern_table[];
-extern u8 debug_centralization, debug_training_ip, debug_training_bist,
- debug_pbs, debug_training_static, debug_leveling;
extern struct hws_tip_config_func_db config_func_info[];
extern u8 twr_mask_table[];
extern u8 cl_mask_table[];
@@ -76,7 +107,6 @@ extern u32 g_rtt_nom;
extern u32 g_rtt_wr;
extern u32 g_rtt_park;
-extern u8 debug_training_access;
extern u32 first_active_if;
extern u32 delay_enable, ck_delay, ca_delay;
extern u32 mask_tune_func;
@@ -122,8 +152,6 @@ extern u32 effective_cs;
extern int ddr3_tip_centr_skip_min_win_check;
extern u32 *dq_map_table;
-extern u8 debug_training_hw_alg;
-
extern u32 start_xsb_offset;
extern u32 odt_config;
--
2.43.2
More information about the U-Boot
mailing list