[PATCH v2 5/5] common: Convert *.c/h from UTF-8 to ASCII enconfing
Michal Simek
michal.simek at amd.com
Tue Apr 16 08:55:19 CEST 2024
Convert UTF-8 chars to ASCII in cases where make sense. No Copyright or
names are converted.
Signed-off-by: Michal Simek <michal.simek at amd.com>
---
Changes in v2:
- New patch in series
.../armv8/fsl-layerscape/fsl_lsch2_serdes.c | 2 +-
.../armv8/fsl-layerscape/fsl_lsch3_serdes.c | 2 +-
arch/arm/mach-imx/ddrmc-vf610-calibration.c | 12 +++++-----
arch/arm/mach-imx/mx6/clock.c | 8 +++----
arch/arm/mach-imx/mx7/psci-mx7.c | 4 ++--
arch/mips/mach-mscc/include/mach/ddr.h | 2 +-
.../include/mach/cvmx-helper-pki.h | 2 +-
arch/mips/mach-octeon/include/mach/cvmx-pki.h | 6 ++---
.../mips/mach-octeon/include/mach/cvmx-pko3.h | 2 +-
board/CZ.NIC/turris_mox/turris_mox.c | 2 +-
board/amlogic/vim3/vim3.c | 2 +-
board/bosch/acc/acc.c | 2 +-
board/bosch/shc/board.c | 2 +-
board/bosch/shc/board.h | 2 +-
board/congatec/cgtqmx8/cgtqmx8.c | 4 ++--
board/freescale/common/i2c_mux.c | 2 +-
board/siemens/capricorn/board.c | 8 +++----
board/st/common/cmd_stboard.c | 2 +-
.../visionfive2/visionfive2-i2c-eeprom.c | 4 ++--
drivers/clk/renesas/rzg2l-cpg.c | 6 ++---
drivers/clk/stm32/clk-stm32-core.h | 22 +++++++++----------
drivers/led/led_lp5562.c | 4 ++--
drivers/mtd/nand/raw/nand_ids.c | 2 +-
drivers/rng/stm32_rng.c | 6 ++---
drivers/soc/ti/k3-navss-ringacc.c | 2 +-
drivers/thermal/thermal_sandbox.c | 2 +-
drivers/video/renesas-r61307.c | 2 +-
drivers/video/renesas-r69328.c | 2 +-
drivers/xen/pvblock.c | 2 +-
include/acpi/acpigen.h | 6 ++---
include/linux/mtd/mtd.h | 2 +-
lib/crypto/x509_cert_parser.c | 2 +-
32 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
index 1541dfb3ec47..b1bb29bcaf55 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_serdes.c
@@ -258,7 +258,7 @@ int setup_serdes_volt(u32 svdd)
/* Wait for SVDD to stabilize */
udelay(100);
- /* For each PLL that’s not disabled via RCW */
+ /* For each PLL that's not disabled via RCW */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index c0efc341afc1..fbd5fd7d433b 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -483,7 +483,7 @@ int setup_serdes_volt(u32 svdd)
ret = -1;
}
- /* For each PLL that’s not disabled via RCW enable the SERDES */
+ /* For each PLL that's not disabled via RCW enable the SERDES */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
do_serdes_enable(cfg_tmp, serdes1_base);
diff --git a/arch/arm/mach-imx/ddrmc-vf610-calibration.c b/arch/arm/mach-imx/ddrmc-vf610-calibration.c
index cd7e95e61d00..7d787d045980 100644
--- a/arch/arm/mach-imx/ddrmc-vf610-calibration.c
+++ b/arch/arm/mach-imx/ddrmc-vf610-calibration.c
@@ -45,7 +45,7 @@
* based on trace length differences from their
* layout.
* Mismatches up to 25% or tCK (clock period) are
- * allowed, so the value in the filed doesn’t have
+ * allowed, so the value in the filed doesn't have
* to be very accurate.
*
* - 0x2 (b'10) - RDLVL_DL_0/1 - refers to adjusting the DQS strobe in relation
@@ -184,14 +184,14 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr)
debug("RDLVL: PHY_RDLVL_EDGE:\t 0x%x\n",
(tmp >> DDRMC_CR101_PHY_RDLVL_EDGE_OFF) & 0x1); //set 0
- /* Program Leveling mode - CR93[SW_LVL_MODE] to ’b10 */
+ /* Program Leveling mode - CR93[SW_LVL_MODE] to 'b10 */
clrsetbits_le32(&ddrmr->cr[93], DDRMC_CR93_SW_LVL_MODE(0x3),
DDRMC_CR93_SW_LVL_MODE(0x2));
tmp = readl(&ddrmr->cr[93]);
debug("RDLVL: SW_LVL_MODE:\t 0x%x\n",
(tmp >> DDRMC_CR93_SW_LVL_MODE_OFF) & 0x3);
- /* Start procedure - CR93[SWLVL_START] to ’b1 */
+ /* Start procedure - CR93[SWLVL_START] to 'b1 */
sw_leveling_start;
/* Poll CR94[SWLVL_OP_DONE] */
@@ -211,7 +211,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr)
0xFFFF << DDRMC_CR105_RDLVL_DL_0_OFF,
i << DDRMC_CR105_RDLVL_DL_0_OFF);
- /* Load values CR93[SWLVL_LOAD] to ’b1 */
+ /* Load values CR93[SWLVL_LOAD] to 'b1 */
sw_leveling_load_value;
/* Poll CR94[SWLVL_OP_DONE] */
@@ -263,7 +263,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr)
0xFFFF << DDRMC_CR110_RDLVL_DL_1_OFF,
i << DDRMC_CR110_RDLVL_DL_1_OFF);
- /* Load values CR93[SWLVL_LOAD] to ’b1 */
+ /* Load values CR93[SWLVL_LOAD] to 'b1 */
sw_leveling_load_value;
/* Poll CR94[SWLVL_OP_DONE] */
@@ -317,7 +317,7 @@ static int ddrmc_cal_dqs_to_dq(struct ddrmr_regs *ddrmr)
sw_leveling_load_value;
sw_leveling_op_done;
- /* Exit procedure - CR94[SWLVL_EXIT] to ’b1 */
+ /* Exit procedure - CR94[SWLVL_EXIT] to 'b1 */
sw_leveling_exit;
/* Poll CR94[SWLVL_OP_DONE] */
diff --git a/arch/arm/mach-imx/mx6/clock.c b/arch/arm/mach-imx/mx6/clock.c
index 1bdc568f9b14..e0da9c239584 100644
--- a/arch/arm/mach-imx/mx6/clock.c
+++ b/arch/arm/mach-imx/mx6/clock.c
@@ -714,10 +714,10 @@ void mxs_set_lcdclk(u32 base_addr, u32 freq)
/*
* Register: PLL_VIDEO
* Bit Field: POST_DIV_SELECT
- * 00 — Divide by 4.
- * 01 — Divide by 2.
- * 10 — Divide by 1.
- * 11 — Reserved
+ * 00 - Divide by 4.
+ * 01 - Divide by 2.
+ * 10 - Divide by 1.
+ * 11 - Reserved
* No need to check post_div(1)
*/
for (post_div = 2; post_div <= 4; post_div <<= 1) {
diff --git a/arch/arm/mach-imx/mx7/psci-mx7.c b/arch/arm/mach-imx/mx7/psci-mx7.c
index 699a2569cb72..0b71fa403446 100644
--- a/arch/arm/mach-imx/mx7/psci-mx7.c
+++ b/arch/arm/mach-imx/mx7/psci-mx7.c
@@ -631,9 +631,9 @@ __secure void psci_system_suspend(u32 __always_unused function_id,
* Workaround:
* If both CPU0/CPU1 are IDLE, the last IDLE CPU should
* disable GIC first, then REG_BYPASS_COUNTER is used
- * to mask wakeup INT, and then execute “wfi” is used to
+ * to mask wakeup INT, and then execute "wfi" is used to
* bring the system into power down processing safely.
- * The counter must be enabled as close to the “wfi” state
+ * The counter must be enabled as close to the "wfi" state
* as possible. The following equation can be used to
* determine the RBC counter value:
* RBC_COUNT * (1/32K RTC frequency) >=
diff --git a/arch/mips/mach-mscc/include/mach/ddr.h b/arch/mips/mach-mscc/include/mach/ddr.h
index 3ba33d27c178..58c89d5e645a 100644
--- a/arch/mips/mach-mscc/include/mach/ddr.h
+++ b/arch/mips/mach-mscc/include/mach/ddr.h
@@ -225,7 +225,7 @@
#define VC3_MPAR_FAW VC3_MPAR_tFAW
#define VC3_MPAR_BL 4
#define MSCC_MEMPARM_MR0 ((VC3_MPAR_RL - 4) << 4) | ((VC3_MPAR_tWR - 4) << 9)
-/* ODT_RTT: “0x0040” for 120ohm, and “0x0004” for 60ohm. */
+/* ODT_RTT: "0x0040" for 120ohm, and "0x0004" for 60ohm. */
#define MSCC_MEMPARM_MR1 0x0040
#define MSCC_MEMPARM_MR2 ((VC3_MPAR_WL - 5) << 3)
#define MSCC_MEMPARM_MR3 0
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
index ff32dab67b51..25e2877469a0 100644
--- a/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
+++ b/arch/mips/mach-octeon/include/mach/cvmx-helper-pki.h
@@ -267,7 +267,7 @@ void cvmx_helper_pki_set_fcs_op(int node, int interface, int nports, int has_fcs
* buffer separate from the work queue entry. Words following the
* WQE in the same cache line will be zeroed, other lines in the
* buffer will not be modified and will retain stale data (from the
- * buffer’s previous use). This setting may decrease the peak PKI
+ * buffer's previous use). This setting may decrease the peak PKI
* performance by up to half on small packets.
*/
void cvmx_helper_pki_set_wqe_mode(int node, bool pkt_outside_wqe);
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pki.h b/arch/mips/mach-octeon/include/mach/cvmx-pki.h
index c1feb55a1f01..d918f792eee5 100644
--- a/arch/mips/mach-octeon/include/mach/cvmx-pki.h
+++ b/arch/mips/mach-octeon/include/mach/cvmx-pki.h
@@ -110,8 +110,8 @@ enum cvmx_pki_wqe_vlan { CVMX_PKI_USE_FIRST_VLAN = 0, CVMX_PKI_USE_SECOND_VLAN }
* Controls how the PKI statistics counters are handled
* The PKI_STAT*_X registers can be indexed either by port kind (pkind), or
* final style. (Does not apply to the PKI_STAT_INB* registers.)
- * 0 = X represents the packet’s pkind
- * 1 = X represents the low 6-bits of packet’s final style
+ * 0 = X represents the packet's pkind
+ * 1 = X represents the low 6-bits of packet's final style
*/
enum cvmx_pki_stats_mode { CVMX_PKI_STAT_MODE_PKIND, CVMX_PKI_STAT_MODE_STYLE };
@@ -880,7 +880,7 @@ int cvmx_pki_get_pkind_style(int node, int pkind);
* buffer separate from the work queue entry. Words following the
* WQE in the same cache line will be zeroed, other lines in the
* buffer will not be modified and will retain stale data (from the
- * buffer’s previous use). This setting may decrease the peak PKI
+ * buffer's previous use). This setting may decrease the peak PKI
* performance by up to half on small packets.
*/
void cvmx_pki_set_wqe_mode(int node, u64 style, bool pkt_outside_wqe);
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-pko3.h b/arch/mips/mach-octeon/include/mach/cvmx-pko3.h
index 86f89be855fe..bda607203f3f 100644
--- a/arch/mips/mach-octeon/include/mach/cvmx-pko3.h
+++ b/arch/mips/mach-octeon/include/mach/cvmx-pko3.h
@@ -366,7 +366,7 @@ enum cvmx_pko_memalg_e {
*/
MEMALG_SETRSLT = 2, /* [DSZ] = B64; mem = PKO_MEM_RESULT_S. */
MEMALG_ADD = 8, /* mem = mem + PKO_SEND_MEM_S[OFFSET] */
- MEMALG_SUB = 9, /* mem = mem – PKO_SEND_MEM_S[OFFSET] */
+ MEMALG_SUB = 9, /* mem = mem - PKO_SEND_MEM_S[OFFSET] */
MEMALG_ADDLEN = 0xA, /* mem += [OFFSET] + PKO_SEND_HDR_S[TOTAL] */
MEMALG_SUBLEN = 0xB, /* mem -= [OFFSET] + PKO_SEND_HDR_S[TOTAL] */
MEMALG_ADDMBUF = 0xC, /* mem += [OFFSET] + mbufs_freed */
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 1a2f60e3d190..00114e6d9156 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -395,7 +395,7 @@ static void load_spi_dtb(void)
return;
/*
- * SPI NOR "dtb" partition offset & size hardcoded for now because the
+ * SPI NOR "dtb" partition offset & size hardcoded for now because the
* mtd subsystem does not offer finding the partition yet and we do not
* want to reimplement OF partition parser here.
*/
diff --git a/board/amlogic/vim3/vim3.c b/board/amlogic/vim3/vim3.c
index 43d7a8e84f62..a4850364f418 100644
--- a/board/amlogic/vim3/vim3.c
+++ b/board/amlogic/vim3/vim3.c
@@ -89,7 +89,7 @@ int meson_ft_board_setup(void *blob, struct bd_info *bd)
/*
* If in PCIe mode, alter DT
- * 0：Enable USB3.0，Disable PCIE, 1：Disable USB3.0, Enable PCIE
+ * 0: Enable USB3.0, Disable PCIE, 1: Disable USB3.0, Enable PCIE
*/
if (ret > 0) {
static char data[32] __aligned(4);
diff --git a/board/bosch/acc/acc.c b/board/bosch/acc/acc.c
index 34088adee47b..65c2f3567135 100644
--- a/board/bosch/acc/acc.c
+++ b/board/bosch/acc/acc.c
@@ -437,7 +437,7 @@ static const struct mx6_ddr3_cfg acc_mx6d_mem_ddr3_1066 = {
.trcd = 1313, // 13.125ns
.trcmin = 5063, // 50.625ns
.trasmin = 3750, // 37.5ns
- .SRT = 0, // Set to 1 for temperatures above 85°C
+ .SRT = 0, // Set to 1 for temperatures above 85 deg C
};
static const struct mx6_ddr_sysinfo acc_mx6d_ddr_info = {
diff --git a/board/bosch/shc/board.c b/board/bosch/shc/board.c
index 962a485acd22..aebdfd4dfec0 100644
--- a/board/bosch/shc/board.c
+++ b/board/bosch/shc/board.c
@@ -115,7 +115,7 @@ static void __maybe_unused force_modules_running(void)
gpio_direction_output(WIFI_REGEN_GPIO, 1);
/*
* Wait for Wi-Fi power regulator to reach a stable voltage
- * (soft-start time, max. 350 µs)
+ * (soft-start time, max. 350 us)
*/
__udelay(350);
diff --git a/board/bosch/shc/board.h b/board/bosch/shc/board.h
index 4cc02f93c64b..a5e58186c9c1 100644
--- a/board/bosch/shc/board.h
+++ b/board/bosch/shc/board.h
@@ -154,7 +154,7 @@ static inline int board_is_series(void)
#define HDR_FATC_LEN 12
/*
-* SHC parameters held in On-Board I²C EEPROM device.
+* SHC parameters held in On-Board I2C EEPROM device.
*
* Header Format
*
diff --git a/board/congatec/cgtqmx8/cgtqmx8.c b/board/congatec/cgtqmx8/cgtqmx8.c
index 3b01354bb6b0..d8e5b1d69633 100644
--- a/board/congatec/cgtqmx8/cgtqmx8.c
+++ b/board/congatec/cgtqmx8/cgtqmx8.c
@@ -171,7 +171,7 @@ int board_mmc_init(struct bd_info *bis)
* (U-Boot device node) (Physical Port)
* mmc0 (onboard eMMC) USDHC1
* mmc1 (external SD card) USDHC2
- * mmc2 (onboard µSD) USDHC3
+ * mmc2 (onboard uSD) USDHC3
*/
for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) {
switch (i) {
@@ -196,7 +196,7 @@ int board_mmc_init(struct bd_info *bis)
gpio_direction_input(USDHC1_CD_GPIO);
break;
case 2:
- /* onboard µSD */
+ /* onboard uSD */
if (!imx8_power_domain_lookup_name("conn_sdhc2", &pd))
power_domain_on(&pd);
diff --git a/board/freescale/common/i2c_mux.c b/board/freescale/common/i2c_mux.c
index 54f89e257609..d40b34f10397 100644
--- a/board/freescale/common/i2c_mux.c
+++ b/board/freescale/common/i2c_mux.c
@@ -12,7 +12,7 @@
/*
* A new Kconfig option for something that used to always be built should be
- * “default y”.
+ * "default y".
*/
#ifdef CONFIG_FSL_USE_PCA9547_MUX
diff --git a/board/siemens/capricorn/board.c b/board/siemens/capricorn/board.c
index 0d66a75bbfa1..b1d7e3b1c05a 100644
--- a/board/siemens/capricorn/board.c
+++ b/board/siemens/capricorn/board.c
@@ -156,14 +156,14 @@ int setup_gpr_fec(void)
* 0: internal clock
* 1: external clock ---> your choice for RMII
*
- * CLKDIV_SEL: it controls a div by 2 on the internal clock path à
- * it should be don’t care when using external clock
+ * CLKDIV_SEL: it controls a div by 2 on the internal clock path a
+ * it should be don't care when using external clock
* 0: non-divided clock
* 1: clock divided by 2
* 50_DISABLE or 125_DISABLE:
- * it’s used to disable the clock tree going outside the chip
+ * it's used to disable the clock tree going outside the chip
* when reference clock is generated internally.
- * It should be don’t care when reference clock is provided
+ * It should be don't care when reference clock is provided
* externally.
* 0: clock is enabled
* 1: clock is disabled
diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c
index cb103e69b369..c8c0bad5da16 100644
--- a/board/st/common/cmd_stboard.c
+++ b/board/st/common/cmd_stboard.c
@@ -9,7 +9,7 @@
* - "Commercial Product Name" (CPN): type of product board (DKX, EVX)
* associated to the board ID "MBxxxx"
* - "Finished Good" or "Finish Good" (FG):
- * effective content of the product without chip STM32MP1xx (LCD, Wifi,…)
+ * effective content of the product without chip STM32MP1xx (LCD, Wifi,...)
* - BOM: cost variant for same FG (for example, several provider of the same
* component)
*
diff --git a/board/starfive/visionfive2/visionfive2-i2c-eeprom.c b/board/starfive/visionfive2/visionfive2-i2c-eeprom.c
index ddef7d612358..5095a0e9fdb0 100644
--- a/board/starfive/visionfive2/visionfive2-i2c-eeprom.c
+++ b/board/starfive/visionfive2/visionfive2-i2c-eeprom.c
@@ -503,7 +503,7 @@ int mac_read_from_eeprom(void)
* "<product>-<date>-<DDR&eMMC>-<serial_number>"
* <date>: 4Byte, should be the output of `date +%y%W`
* <DDR&eMMC>: 8Byte, "D008" means 8GB, "D01T" means 1TB;
- * "E000" means no eMMC，"E032" means 32GB, "E01T" means 1TB.
+ * "E000" means no eMMC, "E032" means 32GB, "E01T" means 1TB.
* <serial_number>: 8Byte, the Unique Identifier of board in hex.
*/
if (!env_get("serial#"))
@@ -533,7 +533,7 @@ u8 get_pcb_revision_from_eeprom(void)
* get_ddr_size_from_eeprom - get the DDR size
* pstr: VF7110A1-2228-D008E000-00000001
* VF7110A1/VF7110B1 : VisionFive JH7110A /VisionFive JH7110B
- * D008: 8GB LPDDR4
+ * D008: 8GB LPDDR4
* E000: No emmc device, ECxx: include emmc device, xx: Capacity size[GB]
* return: the field of 'D008E000'
*/
diff --git a/drivers/clk/renesas/rzg2l-cpg.c b/drivers/clk/renesas/rzg2l-cpg.c
index dba009997a81..c8735d869cf9 100644
--- a/drivers/clk/renesas/rzg2l-cpg.c
+++ b/drivers/clk/renesas/rzg2l-cpg.c
@@ -313,9 +313,9 @@ static ulong rzg2l_sdhi_clk_set_rate(struct udevice *dev, const struct cpg_core_
/*
* As per the HW manual, we should not directly switch from 533 MHz to
- * 400 MHz and vice versa. To change the setting from 2’b01 (533 MHz)
- * to 2’b10 (400 MHz) or vice versa, Switch to 2’b11 (266 MHz) first,
- * and then switch to the target setting (2’b01 (533 MHz) or 2’b10
+ * 400 MHz and vice versa. To change the setting from 2'b01 (533 MHz)
+ * to 2'b10 (400 MHz) or vice versa, Switch to 2'b11 (266 MHz) first,
+ * and then switch to the target setting (2'b01 (533 MHz) or 2'b10
* (400 MHz)).
*/
if (new_sel != SEL_SDHI_266MHz && prev_sel != SEL_SDHI_266MHz) {
diff --git a/drivers/clk/stm32/clk-stm32-core.h b/drivers/clk/stm32/clk-stm32-core.h
index 53c2b467ab87..f9ef07020055 100644
--- a/drivers/clk/stm32/clk-stm32-core.h
+++ b/drivers/clk/stm32/clk-stm32-core.h
@@ -178,7 +178,7 @@ int stm32_rcc_init(struct udevice *dev,
* ------------------------------ ----------
* Each peripheral requires a bus interface clock, named ckg_bus_perx
- * (for peripheral ‘x’).
+ * (for peripheral `x').
* Some peripherals (SAI, UART...) need also a dedicated clock for their
* communication interface, this clock is generally asynchronous with respect to
* the bus interface clock, and is named kernel clock (ckg_ker_perx).
@@ -188,16 +188,16 @@ int stm32_rcc_init(struct udevice *dev,
* the bus or the Kernel was enable.
*
* Example:
- * 1) enable the bus clock
- * --> bus_clk ref_counting = 1, gate_ref_count = 1
- * 2) enable the kernel clock
- * --> perx_ker_ck ref_counting = 1, gate_ref_count = 2
- * 3) disable kernel clock
- * ---> perx_ker_ck ref_counting = 0, gate_ref_count = 1
- * ==> then i will not gate because gate_ref_count > 0
- * 4) disable bus clock
- * --> bus_clk ref_counting = 0, gate_ref_count = 0
- * ==> then i can gate (write in the register) because
+ * 1) enable the bus clock
+ * --> bus_clk ref_counting = 1, gate_ref_count = 1
+ * 2) enable the kernel clock
+ * --> perx_ker_ck ref_counting = 1, gate_ref_count = 2
+ * 3) disable kernel clock
+ * ---> perx_ker_ck ref_counting = 0, gate_ref_count = 1
+ * ==> then i will not gate because gate_ref_count > 0
+ * 4) disable bus clock
+ * --> bus_clk ref_counting = 0, gate_ref_count = 0
+ * ==> then i can gate (write in the register) because
* gate_ref_count = 0
*/
diff --git a/drivers/led/led_lp5562.c b/drivers/led/led_lp5562.c
index 431d7e10ab74..0c5f9bc43003 100644
--- a/drivers/led/led_lp5562.c
+++ b/drivers/led/led_lp5562.c
@@ -125,9 +125,9 @@ static int lp5562_led_reg_update(struct udevice *dev, int regnum,
/*
* Data sheet says "Delay between consecutive I2C writes to
- * ENABLE register (00h) need to be longer than 488 μs
+ * ENABLE register (00h) need to be longer than 488 us
* (typical)." and "Delay between consecutive I2C writes to
- * OP_MODE register need to be longer than 153 μs (typ)."
+ * OP_MODE register need to be longer than 153 us (typ)."
*
* The linux driver does usleep_range(500, 600) and
* usleep_range(200, 300), respectively.
diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c
index 22ea5e2f9076..be60d6d9d995 100644
--- a/drivers/mtd/nand/raw/nand_ids.c
+++ b/drivers/mtd/nand/raw/nand_ids.c
@@ -62,7 +62,7 @@ struct nand_flash_dev nand_flash_ids[] = {
{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
NAND_ECC_INFO(40, SZ_1K), 4 },
- {"H27QCG8T2E5R‐BCF 64G 3.3V 8-bit",
+ {"H27QCG8T2E5R-BCF 64G 3.3V 8-bit",
{ .id = {0xad, 0xde, 0x14, 0xa7, 0x42, 0x4a} },
SZ_16K, SZ_8K, SZ_4M, NAND_NEED_SCRAMBLING, 6, 1664,
NAND_ECC_INFO(56, SZ_1K), 1 },
diff --git a/drivers/rng/stm32_rng.c b/drivers/rng/stm32_rng.c
index 61d5ed615820..44e8a4607520 100644
--- a/drivers/rng/stm32_rng.c
+++ b/drivers/rng/stm32_rng.c
@@ -74,7 +74,7 @@ struct stm32_rng_plat {
* Extracts from the STM32 RNG specification when RNG supports CONDRST.
*
* When a noise source (or seed) error occurs, the RNG stops generating
- * random numbers and sets to “1” both SEIS and SECS bits to indicate
+ * random numbers and sets to "1" both SEIS and SECS bits to indicate
* that a seed error occurred. (...)
*
* 1. Software reset by writing CONDRST at 1 and at 0 (see bitfield
@@ -127,12 +127,12 @@ static int stm32_rng_conceal_seed_error_cond_reset(struct stm32_rng_plat *pdata)
* Extracts from the STM32 RNG specification, when CONDRST is not supported
*
* When a noise source (or seed) error occurs, the RNG stops generating
- * random numbers and sets to “1” both SEIS and SECS bits to indicate
+ * random numbers and sets to "1" both SEIS and SECS bits to indicate
* that a seed error occurred. (...)
*
* The following sequence shall be used to fully recover from a seed
* error after the RNG initialization:
- * 1. Clear the SEIS bit by writing it to “0”.
+ * 1. Clear the SEIS bit by writing it to "0".
* 2. Read out 12 words from the RNG_DR register, and discard each of
* them in order to clean the pipeline.
* 3. Confirm that SEIS is still cleared. Random number generation is
diff --git a/drivers/soc/ti/k3-navss-ringacc.c b/drivers/soc/ti/k3-navss-ringacc.c
index 7a2fbb0db6e8..ed39ff2fa4c7 100644
--- a/drivers/soc/ti/k3-navss-ringacc.c
+++ b/drivers/soc/ti/k3-navss-ringacc.c
@@ -418,7 +418,7 @@ void k3_nav_ringacc_ring_reset_dma(struct k3_nav_ring *ring, u32 occ)
k3_ringacc_ring_reconfig_qmode_sci(
ring, K3_NAV_RINGACC_RING_MODE_RING);
/*
- * 4. Ring the doorbell 2**22 – ringOcc times.
+ * 4. Ring the doorbell 2**22 - ringOcc times.
* This will wrap the internal UDMAP ring state occupancy
* counter (which is 21-bits wide) to 0.
*/
diff --git a/drivers/thermal/thermal_sandbox.c b/drivers/thermal/thermal_sandbox.c
index acc364feb036..7dc0d108b8ca 100644
--- a/drivers/thermal/thermal_sandbox.c
+++ b/drivers/thermal/thermal_sandbox.c
@@ -12,7 +12,7 @@
int sandbox_thermal_get_temp(struct udevice *dev, int *temp)
{
- /* Simply return 100°C */
+ /* Simply return 100 deg C */
*temp = 100;
return 0;
diff --git a/drivers/video/renesas-r61307.c b/drivers/video/renesas-r61307.c
index 426fdc6224a0..986ebaf69b14 100644
--- a/drivers/video/renesas-r61307.c
+++ b/drivers/video/renesas-r61307.c
@@ -19,7 +19,7 @@
#include <power/regulator.h>
/*
- * The datasheet is not publicly available, all values are
+ * The datasheet is not publicly available, all values are
* taken from the downstream. If you have access to datasheets,
* corrections are welcome.
*/
diff --git a/drivers/video/renesas-r69328.c b/drivers/video/renesas-r69328.c
index d2f716946814..f14f7642d0a2 100644
--- a/drivers/video/renesas-r69328.c
+++ b/drivers/video/renesas-r69328.c
@@ -19,7 +19,7 @@
#include <power/regulator.h>
/*
- * The datasheet is not publicly available, all values are
+ * The datasheet is not publicly available, all values are
* taken from the downstream. If you have access to datasheets,
* corrections are welcome.
*/
diff --git a/drivers/xen/pvblock.c b/drivers/xen/pvblock.c
index 1df04e239ad0..9fc51d203e5e 100644
--- a/drivers/xen/pvblock.c
+++ b/drivers/xen/pvblock.c
@@ -79,7 +79,7 @@ struct blkfront_plat {
};
/**
- * struct blkfront_aiocb - AIO сontrol block
+ * struct blkfront_aiocb - AIO control block
* @aio_dev: Blockfront device
* @aio_buf: Memory buffer, which must be sector-aligned for
* @aio_dev sector
diff --git a/include/acpi/acpigen.h b/include/acpi/acpigen.h
index 2c269ed6627e..3aa94d70b9ce 100644
--- a/include/acpi/acpigen.h
+++ b/include/acpi/acpigen.h
@@ -121,7 +121,7 @@ struct acpi_cstate {
*
* @percent: Percent of the core CPU operating frequency that will be
* available when this throttling state is invoked
- * @power: Throttling state’s maximum power dissipation (mw)
+ * @power: Throttling state's maximum power dissipation (mw)
* @latency: Worst-case latency (uS) that the CPU is unavailable during a
* transition from any throttling state to this throttling state
* @control: Value to be written to the Processor Control Register
@@ -920,7 +920,7 @@ void acpigen_write_pss_package(struct acpi_ctx *ctx, uint corefreq, uint power,
* @ctx: ACPI context pointer
* @domain: Dependency domain number to which this P state entry belongs
* @numprocs: Number of processors belonging to the domain for this logical
- * processor’s P-states
+ * processor's P-states
* @coordtype: Coordination type
*/
void acpigen_write_psd_package(struct acpi_ctx *ctx, uint domain, uint numprocs,
@@ -972,7 +972,7 @@ void acpigen_write_tss_package(struct acpi_ctx *ctx,
* @ctx: ACPI context pointer
* @domain: dependency domain number to which this T state entry belongs
* @numprocs: Number of processors belonging to the domain for this logical
- * processor’s T-states
+ * processor's T-states
* @coordtype: Coordination type
*/
void acpigen_write_tsd_package(struct acpi_ctx *ctx, uint domain, uint numprocs,
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 7a66c7af749d..ee18a63e4601 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -153,7 +153,7 @@ struct mtd_info {
uint32_t flags;
uint64_t size; // Total size of the MTD
- /* "Major" erase size for the device. Naïve users may take this
+ /* "Major" erase size for the device. Naive users may take this
* to be the only erase size available, or may use the more detailed
* information below if they desire
*/
diff --git a/lib/crypto/x509_cert_parser.c b/lib/crypto/x509_cert_parser.c
index a0f0689118f6..34de75a3ece3 100644
--- a/lib/crypto/x509_cert_parser.c
+++ b/lib/crypto/x509_cert_parser.c
@@ -535,7 +535,7 @@ int x509_process_extension(void *context, size_t hdrlen,
* Decode an ASN.1 universal time or generalised time field into a struct the
* kernel can handle and check it for validity. The time is decoded thus:
*
- * [RFC5280 §4.1.2.5]
+ * [RFC5280 paragraph 74.1.2.5]
* CAs conforming to this profile MUST always encode certificate validity
* dates through the year 2049 as UTCTime; certificate validity dates in
* 2050 or later MUST be encoded as GeneralizedTime. Conforming
--
2.44.0
More information about the U-Boot
mailing list