[PATCH 2/5] mmc: am654_sdhci: Fix OTAP/ITAP delay values

Jaehoon Chung jh80.chung at samsung.com
Wed Apr 17 13:28:47 CEST 2024


Hi Judith,

> -----Original Message-----
> From: Judith Mendez <jm at ti.com>
> Sent: Tuesday, April 16, 2024 6:28 AM
> To: Peng Fan <peng.fan at nxp.com>; Jaehoon Chung <jh80.chung at samsung.com>; Tom Rini <trini at konsulko.com>
> Cc: Nitin Yadav <n-yadav at ti.com>; Simon Glass <sjg at chromium.org>; u-boot at lists.denx.de
> Subject: [PATCH 2/5] mmc: am654_sdhci: Fix OTAP/ITAP delay values
> 
> From: Nitin Yadav <n-yadav at ti.com>
> 
> U-Boot is failing to boot class U1 UHS SD cards due to incorrect
> OTAP and ITAP delay select values. Update OTAP and ITAP delay select
> values from DT.
> 
> Fixes: c7d106b4eb3 ("mmc: am654_sdhci: Update output tap delay writes")
> Signed-off-by: Nitin Yadav <n-yadav at ti.com>
> Signed-off-by: Judith Mendez <jm at ti.com>
> ---
>  drivers/mmc/am654_sdhci.c | 23 +++++++++++++++++++----
>  1 file changed, 19 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
> index e5ad00e2531..1dd032e1e36 100644
> --- a/drivers/mmc/am654_sdhci.c
> +++ b/drivers/mmc/am654_sdhci.c
> @@ -513,12 +513,27 @@ static int j721e_4bit_sdhci_set_ios_post(struct sdhci_host *host)
>  {
>  	struct udevice *dev = host->mmc->dev;
>  	struct am654_sdhci_plat *plat = dev_get_plat(dev);
> -	u32 otap_del_sel, mask, val;
> +	int mode = host->mmc->selected_mode;
> +	u32 otap_del_sel;
> +	u32 itap_del_sel;
> +	u32 mask, val;
> +
> +	otap_del_sel = plat->otap_del_sel[mode];
> 
> -	otap_del_sel = plat->otap_del_sel[host->mmc->selected_mode];
>  	mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
> -	val = (1 << OTAPDLYENA_SHIFT) | (otap_del_sel << OTAPDLYSEL_SHIFT);
> +	val = (1 << OTAPDLYENA_SHIFT) |
> +	      (otap_del_sel << OTAPDLYSEL_SHIFT);

Is there any reason to touch this? And I can't understood this, this val doesn’t use anywhere.
Because val is resetting the below. It seems same value, right?

> +
> +	itap_del_sel = plat->itap_del_sel[mode];
> +
> +	mask |= ITAPDLYENA_MASK | ITAPDLYSEL_MASK;

Can it be set at above?

mask |= OTAPDLYENA_MASK | OTAPDLYSEL_MASK | 
	ITAPDLYENA_MASK | ITAPDLYSEL_MASK;

Best Regards,
Jaehoon Chung



> +	val = (1 << ITAPDLYENA_SHIFT) |
> +	      (itap_del_sel << ITAPDLYSEL_SHIFT);
> +
> +	regmap_update_bits(plat->base, PHY_CTRL4, ITAPCHGWIN_MASK,
> +			   1 << ITAPCHGWIN_SHIFT);
>  	regmap_update_bits(plat->base, PHY_CTRL4, mask, val);
> +	regmap_update_bits(plat->base, PHY_CTRL4, ITAPCHGWIN_MASK, 0);
> 
>  	regmap_update_bits(plat->base, PHY_CTRL5, CLKBUFSEL_MASK,
>  			   plat->clkbuf_sel);
> @@ -572,7 +587,7 @@ static int sdhci_am654_get_otap_delay(struct udevice *dev,
>  	 * Remove the corresponding capability if an otap-del-sel
>  	 * value is not found
>  	 */
> -	for (i = MMC_HS; i <= MMC_HS_400; i++) {
> +	for (i = MMC_LEGACY; i <= MMC_HS_400; i++) {
>  		ret = dev_read_u32(dev, td[i].otap_binding,
>  				   &plat->otap_del_sel[i]);
>  		if (ret) {
> --
> 2.43.2





More information about the U-Boot mailing list