[PATCH 2/3] arm: dts: drop qcom dts files

Caleb Connolly caleb.connolly at linaro.org
Thu Apr 18 19:24:10 CEST 2024


These files are all identical (or older) than those in dts/upstream.
Drop them as we now use upstream DTS files with OF_UPSTREAM.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 arch/arm/dts/apq8016-sbc.dts                |  729 ----
 arch/arm/dts/apq8096-db820c.dts             | 1137 ------
 arch/arm/dts/msm8916-pm8916.dtsi            |  157 -
 arch/arm/dts/msm8916.dtsi                   | 2702 -------------
 arch/arm/dts/msm8996.dtsi                   | 3884 ------------------
 arch/arm/dts/pm8916.dtsi                    |  178 -
 arch/arm/dts/pm8994.dtsi                    |  152 -
 arch/arm/dts/pm8998.dtsi                    |  130 -
 arch/arm/dts/pmi8994.dtsi                   |   65 -
 arch/arm/dts/pmi8998.dtsi                   |   98 -
 arch/arm/dts/pms405.dtsi                    |  149 -
 arch/arm/dts/qcs404-evb-4000.dts            |   96 -
 arch/arm/dts/qcs404-evb.dtsi                |  389 --
 arch/arm/dts/qcs404.dtsi                    | 1829 ---------
 arch/arm/dts/sdm845-db845c.dts              | 1190 ------
 arch/arm/dts/sdm845-samsung-starqltechn.dts |  460 ---
 arch/arm/dts/sdm845-wcd9340.dtsi            |   86 -
 arch/arm/dts/sdm845.dtsi                    | 5752 ---------------------------
 18 files changed, 19183 deletions(-)

diff --git a/arch/arm/dts/apq8016-sbc.dts b/arch/arm/dts/apq8016-sbc.dts
deleted file mode 100644
index 9ffad7d1f2b6..000000000000
--- a/arch/arm/dts/apq8016-sbc.dts
+++ /dev/null
@@ -1,729 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "msm8916-pm8916.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
-#include <dt-bindings/sound/apq8016-lpass.h>
-
-/ {
-	model = "Qualcomm Technologies, Inc. APQ 8016 SBC";
-	compatible = "qcom,apq8016-sbc", "qcom,apq8016";
-
-	aliases {
-		mmc0 = &sdhc_1; /* eMMC */
-		mmc1 = &sdhc_2; /* SD card */
-		serial0 = &blsp_uart2;
-		serial1 = &blsp_uart1;
-		usid0 = &pm8916_0;
-		i2c0 = &blsp_i2c2;
-		i2c1 = &blsp_i2c6;
-		i2c3 = &blsp_i2c4;
-		spi0 = &blsp_spi5;
-		spi1 = &blsp_spi3;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	reserved-memory {
-		ramoops at bff00000 {
-			compatible = "ramoops";
-			reg = <0x0 0xbff00000 0x0 0x100000>;
-
-			record-size = <0x20000>;
-			console-size = <0x20000>;
-			ftrace-size = <0x20000>;
-		};
-	};
-
-	usb2513 {
-		compatible = "smsc,usb3503";
-		reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
-		initial-mode = <1>;
-	};
-
-	usb_id: usb-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_id_default>;
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&adv7533_out>;
-			};
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&msm_key_volp_n_default>;
-
-		button {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&tlmm_leds>,
-			    <&pm8916_gpios_leds>,
-			    <&pm8916_mpps_leds>;
-
-		compatible = "gpio-leds";
-
-		led at 1 {
-			label = "apq8016-sbc:green:user1";
-			function = LED_FUNCTION_HEARTBEAT;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led at 2 {
-			label = "apq8016-sbc:green:user2";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&tlmm 120 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led at 3 {
-			label = "apq8016-sbc:green:user3";
-			function = LED_FUNCTION_DISK_ACTIVITY;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led at 4 {
-			label = "apq8016-sbc:green:user4";
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			panic-indicator;
-			default-state = "off";
-		};
-
-		led at 5 {
-			label = "apq8016-sbc:yellow:wlan";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led at 6 {
-			label = "apq8016-sbc:blue:bt";
-			function = LED_FUNCTION_BLUETOOTH;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-};
-
-&blsp_i2c2 {
-	/* On Low speed expansion: LS-I2C0 */
-	status = "okay";
-};
-
-&blsp_i2c4 {
-	/* On High speed expansion: HS-I2C2 */
-	status = "okay";
-
-	adv_bridge: bridge at 39 {
-		status = "okay";
-
-		compatible = "adi,adv7533";
-		reg = <0x39>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
-
-		adi,dsi-lanes = <4>;
-		clocks = <&rpmcc RPM_SMD_BB_CLK2>;
-		clock-names = "cec";
-
-		pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-
-		avdd-supply = <&pm8916_l6>;
-		a2vdd-supply = <&pm8916_l6>;
-		dvdd-supply = <&pm8916_l6>;
-		pvdd-supply = <&pm8916_l6>;
-		v1p2-supply = <&pm8916_l6>;
-		v3p3-supply = <&pm8916_l17>;
-
-		pinctrl-names = "default","sleep";
-		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
-		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-		#sound-dai-cells = <1>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port at 0 {
-				reg = <0>;
-				adv7533_in: endpoint {
-					remote-endpoint = <&mdss_dsi0_out>;
-				};
-			};
-
-			port at 1 {
-				reg = <1>;
-				adv7533_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&blsp_i2c6 {
-	/* On Low speed expansion: LS-I2C1 */
-	status = "okay";
-};
-
-&blsp_spi3 {
-	/* On High speed expansion: HS-SPI1 */
-	status = "okay";
-};
-
-&blsp_spi5 {
-	/* On Low speed expansion: LS-SPI0 */
-	status = "okay";
-};
-
-&blsp_uart1 {
-	status = "okay";
-	label = "LS-UART0";
-};
-
-&blsp_uart2 {
-	status = "okay";
-	label = "LS-UART1";
-};
-
-&camss {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&lpass {
-	status = "okay";
-};
-
-&lpass_codec {
-	status = "okay";
-};
-
-&mba_mem {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0_out {
-	data-lanes = <0 1 2 3>;
-	remote-endpoint = <&adv7533_in>;
-};
-
-&mpss {
-	status = "okay";
-
-	firmware-name = "qcom/apq8016/mba.mbn", "qcom/apq8016/modem.mbn";
-};
-
-&mpss_mem {
-	status = "okay";
-	reg = <0x0 0x86800000 0x0 0x2b00000>;
-};
-
-&pm8916_codec {
-	status = "okay";
-	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
-	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
-};
-
-&pm8916_resin {
-	status = "okay";
-	linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&pm8916_rpm_regulators {
-	/*
-	 * The 96Boards specification expects a 1.8V power rail on the low-speed
-	 * expansion connector that is able to provide at least 0.18W / 100 mA.
-	 * L15/L16 are connected in parallel to provide 55 mA each. A minimum load
-	 * must be specified to ensure the regulators are not put in LPM where they
-	 * would only provide 5 mA.
-	 */
-	pm8916_l15: l15 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-system-load = <50000>;
-		regulator-allow-set-load;
-		regulator-always-on;
-	};
-	pm8916_l16: l16 {
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-system-load = <50000>;
-		regulator-allow-set-load;
-		regulator-always-on;
-	};
-
-	pm8916_l17: l17 {
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
-
-&sdhc_1 {
-	status = "okay";
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
-	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
-
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
-	status = "okay";
-
-	pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
-	pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
-	pinctrl-names = "default", "sleep";
-	model = "DB410c";
-	audio-routing =
-		"AMIC2", "MIC BIAS Internal2",
-		"AMIC3", "MIC BIAS External1";
-
-	quaternary-dai-link {
-		link-name = "ADV7533";
-		cpu {
-			sound-dai = <&lpass MI2S_QUATERNARY>;
-		};
-		codec {
-			sound-dai = <&adv_bridge 0>;
-		};
-	};
-
-	primary-dai-link {
-		link-name = "WCD";
-		cpu {
-			sound-dai = <&lpass MI2S_PRIMARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>;
-		};
-	};
-
-	tertiary-dai-link {
-		link-name = "WCD-Capture";
-		cpu {
-			sound-dai = <&lpass MI2S_TERTIARY>;
-		};
-		codec {
-			sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>;
-		};
-	};
-};
-
-&usb {
-	status = "okay";
-	extcon = <&usb_id>, <&usb_id>;
-
-	pinctrl-names = "default", "device";
-	pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
-	pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
-};
-
-&usb_hs_phy {
-	extcon = <&usb_id>;
-};
-
-&venus {
-	status = "okay";
-};
-
-&venus_mem {
-	status = "okay";
-};
-
-&wcnss {
-	status = "okay";
-	firmware-name = "qcom/apq8016/wcnss.mbn";
-};
-
-&wcnss_ctrl {
-	firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin";
-};
-
-&wcnss_iris {
-	compatible = "qcom,wcn3620";
-};
-
-&wcnss_mem {
-	status = "okay";
-};
-
-/* Enable CoreSight */
-&cti0 { status = "okay"; };
-&cti1 { status = "okay"; };
-&cti12 { status = "okay"; };
-&cti13 { status = "okay"; };
-&cti14 { status = "okay"; };
-&cti15 { status = "okay"; };
-&debug0 { status = "okay"; };
-&debug1 { status = "okay"; };
-&debug2 { status = "okay"; };
-&debug3 { status = "okay"; };
-&etf { status = "okay"; };
-&etm0 { status = "okay"; };
-&etm1 { status = "okay"; };
-&etm2 { status = "okay"; };
-&etm3 { status = "okay"; };
-&etr { status = "okay"; };
-&funnel0 { status = "okay"; };
-&funnel1 { status = "okay"; };
-&replicator { status = "okay"; };
-&stm { status = "okay"; };
-&tpiu { status = "okay"; };
-
-/*
- * 2mA drive strength is not enough when connecting multiple
- * I2C devices with different pull up resistors.
- */
-&blsp_i2c2_default {
-	drive-strength = <16>;
-};
-
-&blsp_i2c4_default {
-	drive-strength = <16>;
-};
-
-&blsp_i2c6_default {
-	drive-strength = <16>;
-};
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC = not connected (pin out but not routed from the chip to
- *              anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC = Low Speed External Connector
- *         HSEC = High Speed External Connector
- *
- * Line names are taken from the schematic "DragonBoard410c"
- * dated monday, august 31, 2015. Page 5 in particular.
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-&tlmm {
-	gpio-line-names =
-		"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
-		"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
-		"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
-		"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
-		"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
-		"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
-		"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
-		"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
-		"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
-		"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
-		"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
-		"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
-		"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
-		"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
-		"[I2C3_SDA]", /* HSEC pin 38 */
-		"[I2C3_SCL]", /* HSEC pin 36 */
-		"[SPI0_MOSI]", /* LSEC pin 14 */
-		"[SPI0_MISO]", /* LSEC pin 10 */
-		"[SPI0_CS_N]", /* LSEC pin 12 */
-		"[SPI0_CLK]", /* LSEC pin 8 */
-		"HDMI_HPD_N", /* GPIO 20 */
-		"USR_LED_1_CTRL",
-		"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
-		"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
-		"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
-		"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
-		"[CSI0_MCLK]", /* HSEC pin 15 */
-		"[CSI1_MCLK]", /* HSEC pin 17 */
-		"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
-		"[I2C2_SDA]", /* HSEC pin 34 */
-		"[I2C2_SCL]", /* HSEC pin 32 */
-		"DSI2HDMI_INT_N",
-		"DSI_SW_SEL_APQ",
-		"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
-		"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
-		"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
-		"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
-		"FORCED_USB_BOOT",
-		"SD_CARD_DET_N",
-		"[WCSS_BT_SSBI]",
-		"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
-		"[WCSS_WLAN_DATA_1]",
-		"[WCSS_WLAN_DATA_0]",
-		"[WCSS_WLAN_SET]",
-		"[WCSS_WLAN_CLK]",
-		"[WCSS_FM_SSBI]",
-		"[WCSS_FM_SDI]",
-		"[WCSS_BT_DAT_CTL]",
-		"[WCSS_BT_DAT_STB]",
-		"NC",
-		"NC", /* GPIO 50 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 60 */
-		"NC",
-		"NC",
-		"[CDC_PDM0_CLK]",
-		"[CDC_PDM0_SYNC]",
-		"[CDC_PDM0_TX0]",
-		"[CDC_PDM0_RX0]",
-		"[CDC_PDM0_RX1]",
-		"[CDC_PDM0_RX2]",
-		"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
-		"NC", /* GPIO 70 */
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 74 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"BOOT_CONFIG_0", /* GPIO 80 */
-		"BOOT_CONFIG_1",
-		"BOOT_CONFIG_2",
-		"BOOT_CONFIG_3",
-		"NC",
-		"NC",
-		"BOOT_CONFIG_5",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 90 */
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC", /* GPIO 100 */
-		"NC",
-		"NC",
-		"NC",
-		"SSBI_GPS",
-		"NC",
-		"NC",
-		"KEY_VOLP_N",
-		"NC",
-		"NC",
-		"[LS_EXP_MI2S_WS]", /* GPIO 110 */
-		"NC",
-		"NC",
-		"[LS_EXP_MI2S_SCK]",
-		"[LS_EXP_MI2S_DATA0]",
-		"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
-		"NC",
-		"[DSI2HDMI_MI2S_WS]",
-		"[DSI2HDMI_MI2S_SCK]",
-		"[DSI2HDMI_MI2S_DATA0]",
-		"USR_LED_2_CTRL", /* GPIO 120 */
-		"SB_HS_ID";
-
-	sdc2_cd_default: sdc2-cd-default-state {
-		pins = "gpio38";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tlmm_leds: tlmm-leds-state {
-		pins = "gpio21", "gpio120";
-		function = "gpio";
-
-		output-low;
-	};
-
-	usb_id_default: usb-id-default-state {
-		pins = "gpio121";
-		function = "gpio";
-
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-
-	adv7533_int_active: adv533-int-active-state {
-		pins = "gpio31";
-		function = "gpio";
-
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	adv7533_int_suspend: adv7533-int-suspend-state {
-		pins = "gpio31";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	adv7533_switch_active: adv7533-switch-active-state {
-		pins = "gpio32";
-		function = "gpio";
-
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	adv7533_switch_suspend: adv7533-switch-suspend-state {
-		pins = "gpio32";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	msm_key_volp_n_default: msm-key-volp-n-default-state {
-		pins = "gpio107";
-		function = "gpio";
-
-		drive-strength = <8>;
-		bias-pull-up;
-	};
-};
-
-&pm8916_gpios {
-	gpio-line-names =
-		"USR_LED_3_CTRL",
-		"USR_LED_4_CTRL",
-		"USB_HUB_RESET_N_PM",
-		"USB_SW_SEL_PM";
-
-	usb_hub_reset_pm: usb-hub-reset-pm-state {
-		pins = "gpio3";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		input-disable;
-		output-high;
-	};
-
-	usb_hub_reset_pm_device: usb-hub-reset-pm-device-state {
-		pins = "gpio3";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		output-low;
-	};
-
-	usb_sw_sel_pm: usb-sw-sel-pm-state {
-		pins = "gpio4";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		power-source = <PM8916_GPIO_VPH>;
-		input-disable;
-		output-high;
-	};
-
-	usb_sw_sel_pm_device: usb-sw-sel-pm-device-state {
-		pins = "gpio4";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		power-source = <PM8916_GPIO_VPH>;
-		input-disable;
-		output-low;
-	};
-
-	pm8916_gpios_leds: pm8916-gpios-leds-state {
-		pins = "gpio1", "gpio2";
-		function = PMIC_GPIO_FUNC_NORMAL;
-
-		output-low;
-	};
-};
-
-&pm8916_mpps {
-	gpio-line-names =
-		"VDD_PX_BIAS",
-		"WLAN_LED_CTRL",
-		"BT_LED_CTRL",
-		"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f>;
-
-	ls_exp_gpio_f: pm8916-mpp4-state {
-		pins = "mpp4";
-		function = "digital";
-
-		output-low;
-		power-source = <PM8916_MPP_L5>;	/* 1.8V */
-	};
-
-	pm8916_mpps_leds: pm8916-mpps-state {
-		pins = "mpp2", "mpp3";
-		function = "digital";
-
-		output-low;
-	};
-};
diff --git a/arch/arm/dts/apq8096-db820c.dts b/arch/arm/dts/apq8096-db820c.dts
deleted file mode 100644
index e8148b3d6c50..000000000000
--- a/arch/arm/dts/apq8096-db820c.dts
+++ /dev/null
@@ -1,1137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include "msm8996.dtsi"
-#include "pm8994.dtsi"
-#include "pmi8994.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include <dt-bindings/sound/qcom,wcd9335.h>
-
-/*
- * GPIO name legend: proper name = the GPIO line is used as GPIO
- *         NC      = not connected (pin out but not routed from the chip to
- *                   anything the board)
- *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
- *         LSEC    = Low Speed External Connector
- *         P HSEC  = Primary High Speed External Connector
- *         S HSEC  = Secondary High Speed External Connector
- *         J14     = Camera Connector
- *         TP      = Test Points
- *
- * Line names are taken from the schematic "DragonBoard 820c",
- * drawing no: LM25-P2751-1
- *
- * For the lines routed to the external connectors the
- * lines are named after the 96Boards CE Specification 1.0,
- * Appendix "Expansion Connector Signal Description".
- *
- * When the 96Board naming of a line and the schematic name of
- * the same line are in conflict, the 96Board specification
- * takes precedence, which means that the external UART on the
- * LSEC is named UART0 while the schematic and SoC names this
- * UART3. This is only for the informational lines i.e. "[FOO]",
- * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
- * ones actually used for GPIO.
- */
-
-/ {
-	model = "Qualcomm Technologies, Inc. DB820c";
-	compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
-
-	aliases {
-		serial0 = &blsp2_uart2;
-		serial1 = &blsp2_uart3;
-		serial2 = &blsp1_uart2;
-		i2c0 = &blsp1_i2c3;
-		i2c1 = &blsp2_i2c1;
-		i2c2 = &blsp2_i2c1;
-		spi0 = &blsp1_spi1;
-		spi1 = &blsp2_spi6;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	div1_mclk: divclk1 {
-		compatible = "gpio-gate-clock";
-		pinctrl-0 = <&audio_mclk>;
-		pinctrl-names = "default";
-		clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
-		#clock-cells = <0>;
-		enable-gpios = <&pm8994_gpios 15 0>;
-	};
-
-	divclk4: divclk4 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "divclk4";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&divclk4_pin_a>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&volume_up_gpio>;
-
-		button {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	usb2_id: usb2-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_det_gpio>;
-	};
-
-	usb3_id: usb3-id {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpios = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_det_gpio>;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-always-on;
-		regulator-boot-on;
-
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	wlan_en: wlan-en-1-8v {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wlan_en_gpios>;
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm8994_gpios 8 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-};
-
-&blsp1_i2c3 {
-	/* On Low speed expansion: LS-I2C0 */
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	/* On Low speed expansion */
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		/* bt_disable_n gpio */
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-
-		clocks = <&divclk4>;
-	};
-};
-
-&adsp_pil {
-	status = "okay";
-	firmware-name = "qcom/apq8096/adsp.mbn";
-};
-
-&blsp2_i2c1 {
-	/* On High speed expansion: HS-I2C2 */
-	status = "okay";
-};
-
-&blsp2_i2c1 {
-	/* On Low speed expansion: LS-I2C1 */
-	status = "okay";
-};
-
-&blsp2_spi6 {
-	/* On High speed expansion */
-	status = "okay";
-};
-
-&blsp2_uart2 {
-	label = "LS-UART1";
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart2_2pins_default>;
-	pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
-};
-
-&blsp2_uart3 {
-	label = "LS-UART0";
-	status = "disabled";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&blsp2_uart3_4pins_default>;
-	pinctrl-1 = <&blsp2_uart3_4pins_sleep>;
-};
-
-&camss {
-	vdda-supply = <&vreg_l2a_1p25>;
-};
-
-&gpu {
-	status = "okay";
-};
-
-&hsusb_phy1 {
-	status = "okay";
-
-	vdd-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&hsusb_phy2 {
-	status = "okay";
-
-	vdd-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-};
-
-&mdp {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_hdmi {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
-	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
-
-	core-vdda-supply = <&vreg_l12a_1p8>;
-	core-vcc-supply = <&vreg_s4a_1p8>;
-};
-
-&mdss_hdmi_phy {
-	status = "okay";
-
-	vddio-supply = <&vreg_l12a_1p8>;
-	vcca-supply = <&vreg_l28a_0p925>;
-	#phy-cells = <0>;
-};
-
-&mmcc {
-	vdd-gfx-supply = <&vdd_gfx>;
-};
-
-&mss_pil {
-	status = "okay";
-	pll-supply = <&vreg_l12a_1p8>;
-	firmware-name = "qcom/apq8096/mba.mbn", "qcom/apq8096/modem.mbn";
-};
-
-&pm8994_resin {
-	status = "okay";
-	linux,code = <KEY_VOLUMEDOWN>;
-};
-
-&tlmm {
-	gpio-line-names =
-		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-		"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-		"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-		"TP93", /* GPIO_9 */
-		"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-		"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-		"NC", /* GPIO_12 */
-		"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-		"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-		"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-		"TP99", /* GPIO_16 */
-		"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-		"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-		"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-		"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-		"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-		"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-		"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-		"GPIO-D", /* GPIO_24, LSEC pin 26 */
-		"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-		"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-		"BLSP6_I2C_SDA", /* GPIO_27 */
-		"BLSP6_I2C_SCL", /* GPIO_28 */
-		"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-		"GPIO30", /* GPIO_30, S HSEC pin 4 */
-		"HDMI_CEC", /* GPIO_31 */
-		"HDMI_DDC_CLOCK", /* GPIO_32 */
-		"HDMI_DDC_DATA", /* GPIO_33 */
-		"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-		"PCIE0_RST_N", /* GPIO_35 */
-		"PCIE0_CLKREQ_N", /* GPIO_36 */
-		"PCIE0_WAKE", /* GPIO_37 */
-		"SD_CARD_DET_N", /* GPIO_38 */
-		"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-		"W_DISABLE_N", /* GPIO_40 */
-		"[BLSP9_UART_TX]", /* GPIO_41 */
-		"[BLSP9_UART_RX]", /* GPIO_42 */
-		"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-		"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-		"[BLSP3_UART_TX]", /* GPIO_45 */
-		"[BLSP3_UART_RX]", /* GPIO_46 */
-		"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-		"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-		"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-		"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-		"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-		"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-		"[CODEC_INT1_N]", /* GPIO_53 */
-		"[CODEC_INT2_N]", /* GPIO_54 */
-		"[BLSP7_I2C_SDA]", /* GPIO_55 */
-		"[BLSP7_I2C_SCL]", /* GPIO_56 */
-		"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-		"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-		"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-		"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-		"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-		"GPIO-E", /* GPIO_62, LSEC pin 27 */
-		"TP87", /* GPIO_63 */
-		"[CODEC_RST_N]", /* GPIO_64 */
-		"[PCM1_CLK]", /* GPIO_65 */
-		"[PCM1_SYNC]", /* GPIO_66 */
-		"[PCM1_DIN]", /* GPIO_67 */
-		"[PCM1_DOUT]", /* GPIO_68 */
-		"AUDIO_REF_CLK", /* GPIO_69 */
-		"SLIMBUS_CLK", /* GPIO_70 */
-		"SLIMBUS_DATA0", /* GPIO_71 */
-		"SLIMBUS_DATA1", /* GPIO_72 */
-		"NC", /* GPIO_73 */
-		"NC", /* GPIO_74 */
-		"NC", /* GPIO_75 */
-		"NC", /* GPIO_76 */
-		"TP94", /* GPIO_77 */
-		"NC", /* GPIO_78 */
-		"TP95", /* GPIO_79 */
-		"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-		"TP88", /* GPIO_81 */
-		"TP89", /* GPIO_82 */
-		"TP90", /* GPIO_83 */
-		"TP91", /* GPIO_84 */
-		"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-		"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-		"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-		"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-		"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-		"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-		"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-		"NC", /* GPIO_92 */
-		"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-		"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-		"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-		"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-		"NC", /* GPIO_97 */
-		"CAM1_STANDBY_N", /* GPIO_98 */
-		"NC", /* GPIO_99 */
-		"NC", /* GPIO_100 */
-		"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-		"BOOT_CONFIG1", /* GPIO_102 */
-		"USB_HUB_RESET", /* GPIO_103 */
-		"CAM1_RST_N", /* GPIO_104 */
-		"NC", /* GPIO_105 */
-		"NC", /* GPIO_106 */
-		"NC", /* GPIO_107 */
-		"NC", /* GPIO_108 */
-		"NC", /* GPIO_109 */
-		"NC", /* GPIO_110 */
-		"NC", /* GPIO_111 */
-		"NC", /* GPIO_112 */
-		"PMI8994_BUA", /* GPIO_113 */
-		"PCIE2_RST_N", /* GPIO_114 */
-		"PCIE2_CLKREQ_N", /* GPIO_115 */
-		"PCIE2_WAKE", /* GPIO_116 */
-		"SSC_IRQ_0", /* GPIO_117 */
-		"SSC_IRQ_1", /* GPIO_118 */
-		"SSC_IRQ_2", /* GPIO_119 */
-		"NC", /* GPIO_120 */
-		"GPIO121", /* GPIO_121, S HSEC pin 2 */
-		"NC", /* GPIO_122 */
-		"SSC_IRQ_6", /* GPIO_123 */
-		"SSC_IRQ_7", /* GPIO_124 */
-		"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-		"BOOT_CONFIG5", /* GPIO_126 */
-		"NC", /* GPIO_127 */
-		"NC", /* GPIO_128 */
-		"BOOT_CONFIG7", /* GPIO_129 */
-		"PCIE1_RST_N", /* GPIO_130 */
-		"PCIE1_CLKREQ_N", /* GPIO_131 */
-		"PCIE1_WAKE", /* GPIO_132 */
-		"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-		"NC", /* GPIO_134 */
-		"NC", /* GPIO_135 */
-		"BOOT_CONFIG8", /* GPIO_136 */
-		"NC", /* GPIO_137 */
-		"NC", /* GPIO_138 */
-		"GPS_SSBI2", /* GPIO_139 */
-		"GPS_SSBI1", /* GPIO_140 */
-		"NC", /* GPIO_141 */
-		"NC", /* GPIO_142 */
-		"NC", /* GPIO_143 */
-		"BOOT_CONFIG6", /* GPIO_144 */
-		"NC", /* GPIO_145 */
-		"NC", /* GPIO_146 */
-		"NC", /* GPIO_147 */
-		"NC", /* GPIO_148 */
-		"NC"; /* GPIO_149 */
-
-	sdc2_cd_on: sdc2-cd-on-state {
-		pins = "gpio38";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_cd_off: sdc2-cd-off-state {
-		pins = "gpio38";
-		function = "gpio";
-		bias-pull-up;
-		drive-strength = <2>;
-	};
-
-	hdmi_hpd_active: hdmi-hpd-active-state {
-		pins = "gpio34";
-		function = "hdmi_hot";
-		bias-pull-down;
-		drive-strength = <16>;
-	};
-
-	hdmi_hpd_suspend: hdmi-hpd-suspend-state {
-		pins = "gpio34";
-		function = "hdmi_hot";
-		bias-pull-down;
-		drive-strength = <2>;
-	};
-
-	hdmi_ddc_active: hdmi-ddc-active-state {
-		pins = "gpio32", "gpio33";
-		function = "hdmi_ddc";
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-
-	hdmi_ddc_suspend: hdmi-ddc-suspend-state {
-		pins = "gpio32", "gpio33";
-		function = "hdmi_ddc";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	vddpe-3v3-supply = <&wlan_en>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie2 {
-	status = "okay";
-	perst-gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
-	vdda-supply = <&vreg_l28a_0p925>;
-};
-
-&pcie_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&pm8994_gpios {
-	gpio-line-names =
-		"NC",
-		"KEY_VOLP_N",
-		"NC",
-		"BL1_PWM",
-		"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-		"BL1_EN",
-		"NC",
-		"WLAN_EN",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"NC",
-		"DIVCLK1",
-		"DIVCLK2",
-		"DIVCLK3",
-		"DIVCLK4",
-		"BT_EN",
-		"PMIC_SLB",
-		"PMIC_BUA",
-		"USB_VBUS_DET";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994-gpio5-state {
-		pinconf {
-			pins = "gpio5";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	bt_en_gpios: bt-en-pios-state {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan-en-gpios-state {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk-div1-state {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	volume_up_gpio: pm8996-gpio2-state {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-
-	divclk4_pin_a: divclk4-state {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996-gpio22-state {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-};
-
-&pm8994_mpps {
-	gpio-line-names =
-		"VDDPX_BIAS",
-		"WIFI_LED",
-		"NC",
-		"BT_LED",
-		"PM_MPP05",
-		"PM_MPP06",
-		"PM_MPP07",
-		"NC";
-};
-
-&pm8994_spmi_regulators {
-	qcom,saw-reg = <&saw3>;
-	vdd_s11-supply = <&vph_pwr>;
-
-	s9 {
-		qcom,saw-slave;
-	};
-	s10 {
-		qcom,saw-slave;
-	};
-	s11 {
-		qcom,saw-leader;
-		regulator-name = "VDD_APCC";
-		regulator-always-on;
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&pmi8994_gpios {
-	gpio-line-names =
-		"NC",
-		"SPKR_AMP_EN1",
-		"SPKR_AMP_EN2",
-		"TP61",
-		"NC",
-		"USB2_VBUS_DET",
-		"NC",
-		"NC",
-		"NC",
-		"NC";
-
-	usb2_vbus_det_gpio: pmi8996-gpio6-state {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; /* 1.8V */
-		};
-	};
-};
-
-&pmi8994_lpg {
-	qcom,power-source = <1>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pmi8994_mpp2_userled4>;
-
-	qcom,dtest = <0 0>,
-		     <0 0>,
-		     <0 0>,
-		     <4 1>;
-
-	status = "okay";
-
-	led at 1 {
-		reg = <1>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <1>;
-
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-
-	led at 2 {
-		reg = <2>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <0>;
-	};
-
-	led at 3 {
-		reg = <3>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <2>;
-	};
-
-	led at 4 {
-		reg = <4>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <3>;
-	};
-};
-
-&pmi8994_mpps {
-	pmi8994_mpp2_userled4: mpp2-userled4-state {
-		pins = "mpp2";
-		function = "sink";
-
-		output-low;
-		qcom,dtest = <4>;
-	};
-};
-
-&pmi8994_spmi_regulators {
-	vdd_s2-supply = <&vph_pwr>;
-
-	vdd_gfx: s2 {
-		regulator-name = "VDD_GFX";
-		regulator-min-microvolt = <980000>;
-		regulator-max-microvolt = <980000>;
-	};
-};
-
-&rpm_requests {
-	regulators-0 {
-		compatible = "qcom,rpm-pm8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_s4-supply = <&vph_pwr>;
-		vdd_s5-supply = <&vph_pwr>;
-		vdd_s6-supply = <&vph_pwr>;
-		vdd_s7-supply = <&vph_pwr>;
-		vdd_s8-supply = <&vph_pwr>;
-		vdd_s9-supply = <&vph_pwr>;
-		vdd_s10-supply = <&vph_pwr>;
-		vdd_s11-supply = <&vph_pwr>;
-		vdd_s12-supply = <&vph_pwr>;
-		vdd_l1-supply = <&vreg_s1b_1p025>;
-		vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>;
-		vdd_l3_l11-supply = <&vreg_s3a_1p3>;
-		vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>;
-		vdd_l5_l7-supply = <&vreg_s5a_2p15>;
-		vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>;
-		vdd_l8_l16_l30-supply = <&vph_pwr>;
-		vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>;
-		vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>;
-		vdd_l14_l15-supply = <&vreg_s5a_2p15>;
-		vdd_l17_l29-supply = <&vph_pwr_bbyp>;
-		vdd_l20_l21-supply = <&vph_pwr_bbyp>;
-		vdd_l25-supply = <&vreg_s3a_1p3>;
-		vdd_lvs1_2-supply = <&vreg_s4a_1p8>;
-
-		vreg_s3a_1p3: s3 {
-			regulator-name = "vreg_s3a_1p3";
-			regulator-min-microvolt = <1300000>;
-			regulator-max-microvolt = <1300000>;
-		};
-
-		/**
-		 * 1.8v required on LS expansion
-		 * for mezzanine boards
-		 */
-		vreg_s4a_1p8: s4 {
-			regulator-name = "vreg_s4a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-		vreg_s5a_2p15: s5 {
-			regulator-name = "vreg_s5a_2p15";
-			regulator-min-microvolt = <2150000>;
-			regulator-max-microvolt = <2150000>;
-		};
-		vreg_s7a_1p0: s7 {
-			regulator-name = "vreg_s7a_1p0";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-		};
-
-		vreg_l1a_1p0: l1 {
-			regulator-name = "vreg_l1a_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l2a_1p25: l2 {
-			regulator-name = "vreg_l2a_1p25";
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1250000>;
-		};
-		vreg_l3a_0p875: l3 {
-			regulator-name = "vreg_l3a_0p875";
-			regulator-min-microvolt = <850000>;
-			regulator-max-microvolt = <850000>;
-		};
-		vreg_l4a_1p225: l4 {
-			regulator-name = "vreg_l4a_1p225";
-			regulator-min-microvolt = <1225000>;
-			regulator-max-microvolt = <1225000>;
-		};
-		vreg_l6a_1p2: l6 {
-			regulator-name = "vreg_l6a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-		};
-		vreg_l8a_1p8: l8 {
-			regulator-name = "vreg_l8a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l9a_1p8: l9 {
-			regulator-name = "vreg_l9a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l10a_1p8: l10 {
-			regulator-name = "vreg_l10a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l11a_1p15: l11 {
-			regulator-name = "vreg_l11a_1p15";
-			regulator-min-microvolt = <1150000>;
-			regulator-max-microvolt = <1150000>;
-		};
-		vreg_l12a_1p8: l12 {
-			regulator-name = "vreg_l12a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l13a_2p95: l13 {
-			regulator-name = "vreg_l13a_2p95";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-		vreg_l14a_1p8: l14 {
-			regulator-name = "vreg_l14a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l15a_1p8: l15 {
-			regulator-name = "vreg_l15a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l16a_2p7: l16 {
-			regulator-name = "vreg_l16a_2p7";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		vreg_l17a_2p8: l17 {
-			regulator-name = "vreg_l17a_2p8";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-		vreg_l18a_2p85: l18 {
-			regulator-name = "vreg_l18a_2p85";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2900000>;
-		};
-		vreg_l19a_2p8: l19 {
-			regulator-name = "vreg_l19a_2p8";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-		};
-		vreg_l20a_2p95: l20 {
-			regulator-name = "vreg_l20a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-		};
-		vreg_l21a_2p95: l21 {
-			regulator-name = "vreg_l21a_2p95";
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-			regulator-system-load = <200000>;
-		};
-		vreg_l22a_3p0: l22 {
-			regulator-name = "vreg_l22a_3p0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		vreg_l23a_2p8: l23 {
-			regulator-name = "vreg_l23a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l24a_3p075: l24 {
-			regulator-name = "vreg_l24a_3p075";
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-		vreg_l25a_1p2: l25 {
-			regulator-name = "vreg_l25a_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-allow-set-load;
-		};
-		vreg_l26a_0p8: l27 {
-			regulator-name = "vreg_l26a_0p8";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
-		vreg_l28a_0p925: l28 {
-			regulator-name = "vreg_l28a_0p925";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <925000>;
-			regulator-allow-set-load;
-		};
-		vreg_l29a_2p8: l29 {
-			regulator-name = "vreg_l29a_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-		};
-		vreg_l30a_1p8: l30 {
-			regulator-name = "vreg_l30a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-		vreg_l32a_1p8: l32 {
-			regulator-name = "vreg_l32a_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-name = "vreg_lvs1a_1p8";
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-name = "vreg_lvs2a_1p8";
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,rpm-pmi8994-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_bst_byp-supply = <&vph_pwr>;
-
-		vph_pwr_bbyp: boost-bypass {
-			regulator-name = "vph_pwr_bbyp";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		vreg_s1b_1p025: s1 {
-			regulator-name = "vreg_s1b_1p025";
-			regulator-min-microvolt = <1025000>;
-			regulator-max-microvolt = <1025000>;
-		};
-	};
-};
-
-&sdhc2 {
-	/* External SD card */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_state_on &sdc2_cd_on>;
-	pinctrl-1 = <&sdc2_state_off &sdc2_cd_off>;
-	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vreg_l13a_2p95>;
-	status = "okay";
-};
-
-&q6asmdai {
-	dai at 0 {
-		reg = <0>;
-	};
-
-	dai at 1 {
-		reg = <1>;
-	};
-
-	dai at 2 {
-		reg = <2>;
-	};
-};
-
-&slim_msm {
-	status = "okay";
-
-	slim at 1 {
-		reg = <1>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		tasha_ifd: tas-ifd at 0,0 {
-			compatible = "slim217,1a0";
-			reg = <0 0>;
-		};
-
-		wcd9335: codec at 1,0 {
-			compatible = "slim217,1a0";
-			reg = <1 0>;
-
-			clock-names = "mclk", "slimbus";
-			clocks = <&div1_mclk>,
-				 <&rpmcc RPM_SMD_BB_CLK1>;
-			interrupt-parent = <&tlmm>;
-			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
-				     <53 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "intr1", "intr2";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
-			pinctrl-names = "default";
-
-			reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
-			slim-ifc-dev = <&tasha_ifd>;
-
-			#sound-dai-cells = <1>;
-
-			vdd-buck-supply = <&vreg_s4a_1p8>;
-			vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-			vdd-tx-supply = <&vreg_s4a_1p8>;
-			vdd-rx-supply = <&vreg_s4a_1p8>;
-			vdd-io-supply = <&vreg_s4a_1p8>;
-		};
-	};
-};
-
-&sound {
-	compatible = "qcom,apq8096-sndcard";
-	model = "DB820c";
-	audio-routing = "RX_BIAS", "MCLK",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	mm2-dai-link {
-		link-name = "MultiMedia2";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
-		};
-	};
-
-	mm3-dai-link {
-		link-name = "MultiMedia3";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI";
-		cpu {
-			sound-dai = <&q6afedai HDMI_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&mdss_hdmi 0>;
-		};
-	};
-
-	slim-dai-link {
-		link-name = "SLIM Playback";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_6_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9335 AIF4_PB>;
-		};
-	};
-
-	slimcap-dai-link {
-		link-name = "SLIM Capture";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_TX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9335 AIF1_CAP>;
-		};
-	};
-};
-
-&ufsphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&ufshc {
-	status = "okay";
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vccq-supply = <&vreg_l25a_1p2>;
-	vccq2-supply = <&vreg_s4a_1p8>;
-	vdd-hba-supply = <&vreg_l25a_1p2>;
-
-	vcc-max-microamp = <600000>;
-	vccq-max-microamp = <450000>;
-	vccq2-max-microamp = <450000>;
-};
-
-&usb2 {
-	status = "okay";
-	extcon = <&usb2_id>;
-};
-
-&usb2_dwc3 {
-	extcon = <&usb2_id>;
-	dr_mode = "otg";
-	maximum-speed = "high-speed";
-};
-
-&usb3 {
-	status = "okay";
-	extcon = <&usb3_id>;
-};
-
-&usb3_dwc3 {
-	extcon = <&usb3_id>;
-	dr_mode = "otg";
-};
-
-&usb3phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l28a_0p925>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-};
-
-&venus {
-	status = "okay";
-};
diff --git a/arch/arm/dts/msm8916-pm8916.dtsi b/arch/arm/dts/msm8916-pm8916.dtsi
deleted file mode 100644
index b1a7eafbee31..000000000000
--- a/arch/arm/dts/msm8916-pm8916.dtsi
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * msm8916-pm8916.dtsi describes common properties (e.g. regulator connections)
- * that apply to most devices that make use of the MSM8916 SoC and PM8916 PMIC.
- * Many regulators have a fixed purpose in the original reference design and
- * were rarely re-used for different purposes. Devices that deviate from the
- * typical reference design should not make use of this include and instead add
- * the necessary properties in the board-specific device tree.
- */
-
-#include "msm8916.dtsi"
-#include "pm8916.dtsi"
-
-&camss {
-	vdda-supply = <&pm8916_l2>;
-};
-
-&mdss_dsi0 {
-	vdda-supply = <&pm8916_l2>;
-	vddio-supply = <&pm8916_l6>;
-};
-
-&mdss_dsi0_phy {
-	vddio-supply = <&pm8916_l6>;
-};
-
-&mpss {
-	pll-supply = <&pm8916_l7>;
-};
-
-&pm8916_codec {
-	vdd-cdc-io-supply = <&pm8916_l5>;
-	vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>;
-	vdd-micbias-supply = <&pm8916_l13>;
-};
-
-&sdhc_1 {
-	vmmc-supply = <&pm8916_l8>;
-	vqmmc-supply = <&pm8916_l5>;
-};
-
-&sdhc_2 {
-	vmmc-supply = <&pm8916_l11>;
-	vqmmc-supply = <&pm8916_l12>;
-};
-
-&usb_hs_phy {
-	v1p8-supply = <&pm8916_l7>;
-	v3p3-supply = <&pm8916_l13>;
-};
-
-&wcnss {
-	vddpx-supply = <&pm8916_l7>;
-};
-
-&wcnss_iris {
-	vddxo-supply = <&pm8916_l7>;
-	vddrfa-supply = <&pm8916_s3>;
-	vddpa-supply = <&pm8916_l9>;
-	vdddig-supply = <&pm8916_l5>;
-};
-
-&rpm_requests {
-	pm8916_rpm_regulators: regulators {
-		compatible = "qcom,rpm-pm8916-regulators";
-		vdd_l1_l2_l3-supply = <&pm8916_s3>;
-		vdd_l4_l5_l6-supply = <&pm8916_s4>;
-		vdd_l7-supply = <&pm8916_s4>;
-
-		/* pm8916_s1 is managed by rpmpd (MSM8916_VDDCX) */
-
-		pm8916_s3: s3 {
-			regulator-min-microvolt = <1250000>;
-			regulator-max-microvolt = <1350000>;
-			regulator-always-on; /* Needed for L2 */
-		};
-
-		pm8916_s4: s4 {
-			regulator-min-microvolt = <1850000>;
-			regulator-max-microvolt = <2150000>;
-			regulator-always-on; /* Needed for L5/L7 */
-		};
-
-		/*
-		 * Some of the regulators are unused or managed by another
-		 * processor (e.g. the modem). We should still define nodes for
-		 * them to ensure the vote from the application processor can be
-		 * dropped in case the regulators are already on during boot.
-		 *
-		 * The labels for these nodes are omitted on purpose because
-		 * boards should configure a proper voltage before using them.
-		 */
-		l1 {};
-
-		pm8916_l2: l2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-always-on; /* Needed for LPDDR RAM */
-		};
-
-		/* pm8916_l3 is managed by rpmpd (MSM8916_VDDMX) */
-
-		l4 {};
-
-		pm8916_l5: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on; /* Needed for most digital I/O */
-		};
-
-		pm8916_l6: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		pm8916_l7: l7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on; /* Needed for CPU PLL */
-		};
-
-		pm8916_l8: l8 {
-			regulator-min-microvolt = <2900000>;
-			regulator-max-microvolt = <2900000>;
-		};
-
-		pm8916_l9: l9 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		l10 {};
-
-		pm8916_l11: l11 {
-			regulator-min-microvolt = <2950000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-allow-set-load;
-			regulator-system-load = <200000>;
-		};
-
-		pm8916_l12: l12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-		};
-
-		pm8916_l13: l13 {
-			regulator-min-microvolt = <3075000>;
-			regulator-max-microvolt = <3075000>;
-		};
-
-		l14 {};
-		l15 {};
-		l16 {};
-		l17 {};
-		l18 {};
-	};
-};
diff --git a/arch/arm/dts/msm8916.dtsi b/arch/arm/dts/msm8916.dtsi
deleted file mode 100644
index 4f799b536a92..000000000000
--- a/arch/arm/dts/msm8916.dtsi
+++ /dev/null
@@ -1,2702 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/arm/coresight-cti-dt.h>
-#include <dt-bindings/clock/qcom,gcc-msm8916.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/interconnect/qcom,msm8916.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/reset/qcom,gcc-msm8916.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	memory at 80000000 {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the reg */
-		reg = <0 0x80000000 0 0>;
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		tz-apps at 86000000 {
-			reg = <0x0 0x86000000 0x0 0x300000>;
-			no-map;
-		};
-
-		smem at 86300000 {
-			compatible = "qcom,smem";
-			reg = <0x0 0x86300000 0x0 0x100000>;
-			no-map;
-
-			hwlocks = <&tcsr_mutex 3>;
-			qcom,rpm-msg-ram = <&rpm_msg_ram>;
-		};
-
-		hypervisor at 86400000 {
-			reg = <0x0 0x86400000 0x0 0x100000>;
-			no-map;
-		};
-
-		tz at 86500000 {
-			reg = <0x0 0x86500000 0x0 0x180000>;
-			no-map;
-		};
-
-		reserved at 86680000 {
-			reg = <0x0 0x86680000 0x0 0x80000>;
-			no-map;
-		};
-
-		rmtfs at 86700000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0x0 0x86700000 0x0 0xe0000>;
-			no-map;
-
-			qcom,client-id = <1>;
-		};
-
-		rfsa at 867e0000 {
-			reg = <0x0 0x867e0000 0x0 0x20000>;
-			no-map;
-		};
-
-		mpss_mem: mpss at 86800000 {
-			/*
-			 * The memory region for the mpss firmware is generally
-			 * relocatable and could be allocated dynamically.
-			 * However, many firmware versions tend to fail when
-			 * loaded to some special addresses, so it is hard to
-			 * define reliable alloc-ranges.
-			 *
-			 * alignment = <0x0 0x400000>;
-			 * alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
-			 */
-			reg = <0x0 0x86800000 0x0 0>; /* size is device-specific */
-			no-map;
-			status = "disabled";
-		};
-
-		wcnss_mem: wcnss {
-			size = <0x0 0x600000>;
-			alignment = <0x0 0x100000>;
-			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
-			no-map;
-			status = "disabled";
-		};
-
-		venus_mem: venus {
-			size = <0x0 0x500000>;
-			alignment = <0x0 0x100000>;
-			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
-			no-map;
-			status = "disabled";
-		};
-
-		mba_mem: mba {
-			size = <0x0 0x100000>;
-			alignment = <0x0 0x100000>;
-			alloc-ranges = <0x0 0x86800000 0x0 0x8000000>;
-			no-map;
-			status = "disabled";
-		};
-	};
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu at 0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			power-domains = <&CPU_PD0>;
-			power-domain-names = "psci";
-			qcom,acc = <&cpu0_acc>;
-			qcom,saw = <&cpu0_saw>;
-		};
-
-		CPU1: cpu at 1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x1>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			power-domains = <&CPU_PD1>;
-			power-domain-names = "psci";
-			qcom,acc = <&cpu1_acc>;
-			qcom,saw = <&cpu1_saw>;
-		};
-
-		CPU2: cpu at 2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x2>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			power-domains = <&CPU_PD2>;
-			power-domain-names = "psci";
-			qcom,acc = <&cpu2_acc>;
-			qcom,saw = <&cpu2_saw>;
-		};
-
-		CPU3: cpu at 3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x3>;
-			next-level-cache = <&L2_0>;
-			enable-method = "psci";
-			clocks = <&apcs>;
-			operating-points-v2 = <&cpu_opp_table>;
-			#cooling-cells = <2>;
-			power-domains = <&CPU_PD3>;
-			power-domain-names = "psci";
-			qcom,acc = <&cpu3_acc>;
-			qcom,saw = <&cpu3_saw>;
-		};
-
-		L2_0: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-
-		idle-states {
-			entry-method = "psci";
-
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "standalone-power-collapse";
-				arm,psci-suspend-param = <0x40000002>;
-				entry-latency-us = <130>;
-				exit-latency-us = <150>;
-				min-residency-us = <2000>;
-				local-timer-stop;
-			};
-		};
-
-		domain-idle-states {
-
-			CLUSTER_RET: cluster-retention {
-				compatible = "domain-idle-state";
-				arm,psci-suspend-param = <0x41000012>;
-				entry-latency-us = <500>;
-				exit-latency-us = <500>;
-				min-residency-us = <2000>;
-			};
-
-			CLUSTER_PWRDN: cluster-gdhs {
-				compatible = "domain-idle-state";
-				arm,psci-suspend-param = <0x41000032>;
-				entry-latency-us = <2000>;
-				exit-latency-us = <2000>;
-				min-residency-us = <6000>;
-			};
-		};
-	};
-
-	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-		};
-		opp-998400000 {
-			opp-hz = /bits/ 64 <998400000>;
-		};
-	};
-
-	firmware {
-		scm: scm {
-			compatible = "qcom,scm-msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK>,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-			#reset-cells = <1>;
-
-			qcom,dload-mode = <&tcsr 0x6100>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-
-		CPU_PD0: power-domain-cpu0 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		CPU_PD1: power-domain-cpu1 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		CPU_PD2: power-domain-cpu2 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		CPU_PD3: power-domain-cpu3 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&CPU_SLEEP_0>;
-		};
-
-		CLUSTER_PD: power-domain-cluster {
-			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
-		};
-	};
-
-	rpm: remoteproc {
-		compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc";
-
-		smd-edge {
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clocks = <&xo_board>;
-					clock-names = "xo";
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8916-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
-						};
-						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
-						};
-						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
-						};
-						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
-						};
-						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
-						};
-						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	smp2p-hexagon {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-
-		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 14>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		hexagon_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		hexagon_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-wcnss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <451>, <431>;
-
-		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,ipc = <&apcs 8 18>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <4>;
-
-		wcnss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		wcnss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smsm {
-		compatible = "qcom,smsm";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		qcom,ipc-1 = <&apcs 8 13>;
-		qcom,ipc-3 = <&apcs 8 19>;
-
-		apps_smsm: apps at 0 {
-			reg = <0>;
-
-			#qcom,smem-state-cells = <1>;
-		};
-
-		hexagon_smsm: hexagon at 1 {
-			reg = <1>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		wcnss_smsm: wcnss at 6 {
-			reg = <6>;
-			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc at 0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xffffffff>;
-		compatible = "simple-bus";
-
-		rng at 22000 {
-			compatible = "qcom,prng";
-			reg = <0x00022000 0x200>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		restart at 4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0x004ab000 0x4>;
-		};
-
-		qfprom: qfprom at 5c000 {
-			compatible = "qcom,msm8916-qfprom", "qcom,qfprom";
-			reg = <0x0005c000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			tsens_base1: base1 at d0 {
-				reg = <0xd0 0x1>;
-				bits = <0 7>;
-			};
-
-			tsens_s0_p1: s0-p1 at d0 {
-				reg = <0xd0 0x2>;
-				bits = <7 5>;
-			};
-
-			tsens_s0_p2: s0-p2 at d1 {
-				reg = <0xd1 0x2>;
-				bits = <4 5>;
-			};
-
-			tsens_s1_p1: s1-p1 at d2 {
-				reg = <0xd2 0x1>;
-				bits = <1 5>;
-			};
-			tsens_s1_p2: s1-p2 at d2 {
-				reg = <0xd2 0x2>;
-				bits = <6 5>;
-			};
-			tsens_s2_p1: s2-p1 at d3 {
-				reg = <0xd3 0x1>;
-				bits = <3 5>;
-			};
-
-			tsens_s2_p2: s2-p2 at d4 {
-				reg = <0xd4 0x1>;
-				bits = <0 5>;
-			};
-
-			// no tsens with hw_id 3
-
-			tsens_s4_p1: s4-p1 at d4 {
-				reg = <0xd4 0x2>;
-				bits = <5 5>;
-			};
-
-			tsens_s4_p2: s4-p2 at d5 {
-				reg = <0xd5 0x1>;
-				bits = <2 5>;
-			};
-
-			tsens_s5_p1: s5-p1 at d5 {
-				reg = <0xd5 0x2>;
-				bits = <7 5>;
-			};
-
-			tsens_s5_p2: s5-p2 at d6 {
-				reg = <0xd6 0x2>;
-				bits = <4 5>;
-			};
-
-			tsens_base2: base2 at d7 {
-				reg = <0xd7 0x1>;
-				bits = <1 7>;
-			};
-
-			tsens_mode: mode at ef {
-				reg = <0xef 0x1>;
-				bits = <5 3>;
-			};
-		};
-
-		rpm_msg_ram: sram at 60000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0x00060000 0x8000>;
-		};
-
-		sram at 290000 {
-			compatible = "qcom,msm8916-rpm-stats";
-			reg = <0x00290000 0x10000>;
-		};
-
-		bimc: interconnect at 400000 {
-			compatible = "qcom,msm8916-bimc";
-			reg = <0x00400000 0x62000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
-		tsens: thermal-sensor at 4a9000 {
-			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
-			reg = <0x004a9000 0x1000>, /* TM */
-			      <0x004a8000 0x1000>; /* SROT */
-
-			// no hw_id 3
-			nvmem-cells = <&tsens_mode>,
-				      <&tsens_base1>, <&tsens_base2>,
-				      <&tsens_s0_p1>, <&tsens_s0_p2>,
-				      <&tsens_s1_p1>, <&tsens_s1_p2>,
-				      <&tsens_s2_p1>, <&tsens_s2_p2>,
-				      <&tsens_s4_p1>, <&tsens_s4_p2>,
-				      <&tsens_s5_p1>, <&tsens_s5_p2>;
-			nvmem-cell-names = "mode",
-					   "base1", "base2",
-					   "s0_p1", "s0_p2",
-					   "s1_p1", "s1_p2",
-					   "s2_p1", "s2_p2",
-					   "s4_p1", "s4_p2",
-					   "s5_p1", "s5_p2";
-			#qcom,sensors = <5>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
-		pcnoc: interconnect at 500000 {
-			compatible = "qcom,msm8916-pcnoc";
-			reg = <0x00500000 0x11000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
-		};
-
-		snoc: interconnect at 580000 {
-			compatible = "qcom,msm8916-snoc";
-			reg = <0x00580000 0x14000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
-
-		stm: stm at 802000 {
-			compatible = "arm,coresight-stm", "arm,primecell";
-			reg = <0x00802000 0x1000>,
-			      <0x09280000 0x180000>;
-			reg-names = "stm-base", "stm-stimulus-base";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			out-ports {
-				port {
-					stm_out: endpoint {
-						remote-endpoint = <&funnel0_in7>;
-					};
-				};
-			};
-		};
-
-		/* System CTIs */
-		/* CTI 0 - TMC connections */
-		cti0: cti at 810000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x00810000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			status = "disabled";
-		};
-
-		/* CTI 1 - TPIU connections */
-		cti1: cti at 811000 {
-			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x00811000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			status = "disabled";
-		};
-
-		/* CTIs 2-11 - no information - not instantiated */
-
-		tpiu: tpiu at 820000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x00820000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint = <&replicator_out1>;
-					};
-				};
-			};
-		};
-
-		funnel0: funnel at 821000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x00821000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/*
-				 * Not described input ports:
-				 * 0 - connected to Resource and Power Manger CPU ETM
-				 * 1 - not-connected
-				 * 2 - connected to Modem CPU ETM
-				 * 3 - not-connected
-				 * 5 - not-connected
-				 * 6 - connected trought funnel to Wireless CPU ETM
-				 * 7 - connected to STM component
-				 */
-
-				port at 4 {
-					reg = <4>;
-					funnel0_in4: endpoint {
-						remote-endpoint = <&funnel1_out>;
-					};
-				};
-
-				port at 7 {
-					reg = <7>;
-					funnel0_in7: endpoint {
-						remote-endpoint = <&stm_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel0_out: endpoint {
-						remote-endpoint = <&etf_in>;
-					};
-				};
-			};
-		};
-
-		replicator: replicator at 824000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0x00824000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-				port at 1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint = <&tpiu_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
-					};
-				};
-			};
-		};
-
-		etf: etf at 825000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x00825000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint = <&funnel0_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					etf_out: endpoint {
-						remote-endpoint = <&replicator_in>;
-					};
-				};
-			};
-		};
-
-		etr: etr at 826000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x00826000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			in-ports {
-				port {
-					etr_in: endpoint {
-						remote-endpoint = <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		funnel1: funnel at 841000 {	/* APSS funnel only 4 inputs are used */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x00841000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			status = "disabled";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					funnel1_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-				port at 1 {
-					reg = <1>;
-					funnel1_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-				port at 2 {
-					reg = <2>;
-					funnel1_in2: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-				port at 3 {
-					reg = <3>;
-					funnel1_in3: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel1_out: endpoint {
-						remote-endpoint = <&funnel0_in4>;
-					};
-				};
-			};
-		};
-
-		debug0: debug at 850000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x00850000 0x1000>;
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-			cpu = <&CPU0>;
-			status = "disabled";
-		};
-
-		debug1: debug at 852000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x00852000 0x1000>;
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-			cpu = <&CPU1>;
-			status = "disabled";
-		};
-
-		debug2: debug at 854000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x00854000 0x1000>;
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-			cpu = <&CPU2>;
-			status = "disabled";
-		};
-
-		debug3: debug at 856000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x00856000 0x1000>;
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-			cpu = <&CPU3>;
-			status = "disabled";
-		};
-
-		/* Core CTIs; CTIs 12-15 */
-		/* CTI - CPU-0 */
-		cti12: cti at 858000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x00858000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU0>;
-			arm,cs-dev-assoc = <&etm0>;
-
-			status = "disabled";
-		};
-
-		/* CTI - CPU-1 */
-		cti13: cti at 859000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x00859000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU1>;
-			arm,cs-dev-assoc = <&etm1>;
-
-			status = "disabled";
-		};
-
-		/* CTI - CPU-2 */
-		cti14: cti at 85a000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x0085a000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU2>;
-			arm,cs-dev-assoc = <&etm2>;
-
-			status = "disabled";
-		};
-
-		/* CTI - CPU-3 */
-		cti15: cti at 85b000 {
-			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-				     "arm,primecell";
-			reg = <0x0085b000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU3>;
-			arm,cs-dev-assoc = <&etm3>;
-
-			status = "disabled";
-		};
-
-		etm0: etm at 85c000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x0085c000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-			arm,coresight-loses-context-with-cpu;
-
-			cpu = <&CPU0>;
-
-			status = "disabled";
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint = <&funnel1_in0>;
-					};
-				};
-			};
-		};
-
-		etm1: etm at 85d000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x0085d000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-			arm,coresight-loses-context-with-cpu;
-
-			cpu = <&CPU1>;
-
-			status = "disabled";
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint = <&funnel1_in1>;
-					};
-				};
-			};
-		};
-
-		etm2: etm at 85e000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x0085e000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-			arm,coresight-loses-context-with-cpu;
-
-			cpu = <&CPU2>;
-
-			status = "disabled";
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint = <&funnel1_in2>;
-					};
-				};
-			};
-		};
-
-		etm3: etm at 85f000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x0085f000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-			arm,coresight-loses-context-with-cpu;
-
-			cpu = <&CPU3>;
-
-			status = "disabled";
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint = <&funnel1_in3>;
-					};
-				};
-			};
-		};
-
-		tlmm: pinctrl at 1000000 {
-			compatible = "qcom,msm8916-pinctrl";
-			reg = <0x01000000 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 122>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			blsp_i2c1_default: blsp-i2c1-default-state {
-				pins = "gpio2", "gpio3";
-				function = "blsp_i2c1";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c1_sleep: blsp-i2c1-sleep-state {
-				pins = "gpio2", "gpio3";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c2_default: blsp-i2c2-default-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c2";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c2_sleep: blsp-i2c2-sleep-state {
-				pins = "gpio6", "gpio7";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c3_default: blsp-i2c3-default-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_i2c3";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c3_sleep: blsp-i2c3-sleep-state {
-				pins = "gpio10", "gpio11";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c4_default: blsp-i2c4-default-state {
-				pins = "gpio14", "gpio15";
-				function = "blsp_i2c4";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c4_sleep: blsp-i2c4-sleep-state {
-				pins = "gpio14", "gpio15";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c5_default: blsp-i2c5-default-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_i2c5";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c5_sleep: blsp-i2c5-sleep-state {
-				pins = "gpio18", "gpio19";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c6_default: blsp-i2c6-default-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_i2c6";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_i2c6_sleep: blsp-i2c6-sleep-state {
-				pins = "gpio22", "gpio23";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp_spi1_default: blsp-spi1-default-state {
-				spi-pins {
-					pins = "gpio0", "gpio1", "gpio3";
-					function = "blsp_spi1";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi1_sleep: blsp-spi1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_spi2_default: blsp-spi2-default-state {
-				spi-pins {
-					pins = "gpio4", "gpio5", "gpio7";
-					function = "blsp_spi2";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio6";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi2_sleep: blsp-spi2-sleep-state {
-				pins = "gpio4", "gpio5", "gpio6", "gpio7";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_spi3_default: blsp-spi3-default-state {
-				spi-pins {
-					pins = "gpio8", "gpio9", "gpio11";
-					function = "blsp_spi3";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio10";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi3_sleep: blsp-spi3-sleep-state {
-				pins = "gpio8", "gpio9", "gpio10", "gpio11";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_spi4_default: blsp-spi4-default-state {
-				spi-pins {
-					pins = "gpio12", "gpio13", "gpio15";
-					function = "blsp_spi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio14";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi4_sleep: blsp-spi4-sleep-state {
-				pins = "gpio12", "gpio13", "gpio14", "gpio15";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_spi5_default: blsp-spi5-default-state {
-				spi-pins {
-					pins = "gpio16", "gpio17", "gpio19";
-					function = "blsp_spi5";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio18";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi5_sleep: blsp-spi5-sleep-state {
-				pins = "gpio16", "gpio17", "gpio18", "gpio19";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_spi6_default: blsp-spi6-default-state {
-				spi-pins {
-					pins = "gpio20", "gpio21", "gpio23";
-					function = "blsp_spi6";
-					drive-strength = <12>;
-					bias-disable;
-				};
-				cs-pins {
-					pins = "gpio22";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp_spi6_sleep: blsp-spi6-sleep-state {
-				pins = "gpio20", "gpio21", "gpio22", "gpio23";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_uart1_default: blsp-uart1-default-state {
-				/* TX, RX, CTS_N, RTS_N */
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "blsp_uart1";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp_uart1_sleep: blsp-uart1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp_uart2_default: blsp-uart2-default-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp_uart2_sleep: blsp-uart2-sleep-state {
-				pins = "gpio4", "gpio5";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			camera_front_default: camera-front-default-state {
-				pwdn-pins {
-					pins = "gpio33";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-				rst-pins {
-					pins = "gpio28";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-				mclk1-pins {
-					pins = "gpio27";
-					function = "cam_mclk1";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			camera_rear_default: camera-rear-default-state {
-				pwdn-pins {
-					pins = "gpio34";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-				rst-pins {
-					pins = "gpio35";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-				mclk0-pins {
-					pins = "gpio26";
-					function = "cam_mclk0";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			cci0_default: cci0-default-state {
-				pins = "gpio29", "gpio30";
-				function = "cci_i2c";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			cdc_dmic_default: cdc-dmic-default-state {
-				clk-pins {
-					pins = "gpio0";
-					function = "dmic0_clk";
-					drive-strength = <8>;
-				};
-				data-pins {
-					pins = "gpio1";
-					function = "dmic0_data";
-					drive-strength = <8>;
-				};
-			};
-
-			cdc_dmic_sleep: cdc-dmic-sleep-state {
-				clk-pins {
-					pins = "gpio0";
-					function = "dmic0_clk";
-					drive-strength = <2>;
-					bias-disable;
-				};
-				data-pins {
-					pins = "gpio1";
-					function = "dmic0_data";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			cdc_pdm_default: cdc-pdm-default-state {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				function = "cdc_pdm0";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			cdc_pdm_sleep: cdc-pdm-sleep-state {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				function = "cdc_pdm0";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			pri_mi2s_default: mi2s-pri-default-state {
-				pins = "gpio113", "gpio114", "gpio115", "gpio116";
-				function = "pri_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			pri_mi2s_sleep: mi2s-pri-sleep-state {
-				pins = "gpio113", "gpio114", "gpio115", "gpio116";
-				function = "pri_mi2s";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			pri_mi2s_mclk_default: mi2s-pri-mclk-default-state {
-				pins = "gpio116";
-				function = "pri_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			pri_mi2s_mclk_sleep: mi2s-pri-mclk-sleep-state {
-				pins = "gpio116";
-				function = "pri_mi2s";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			pri_mi2s_ws_default: mi2s-pri-ws-default-state {
-				pins = "gpio110";
-				function = "pri_mi2s_ws";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			pri_mi2s_ws_sleep: mi2s-pri-ws-sleep-state {
-				pins = "gpio110";
-				function = "pri_mi2s_ws";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sec_mi2s_default: mi2s-sec-default-state {
-				pins = "gpio112", "gpio117", "gpio118", "gpio119";
-				function = "sec_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			sec_mi2s_sleep: mi2s-sec-sleep-state {
-				pins = "gpio112", "gpio117", "gpio118", "gpio119";
-				function = "sec_mi2s";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			sdc1_default: sdc1-default-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-				cmd-pins {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-				data-pins {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-			};
-
-			sdc1_sleep: sdc1-sleep-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-				cmd-pins {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-				data-pins {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			sdc2_default: sdc2-default-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-				cmd-pins {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-				data-pins {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-			};
-
-			sdc2_sleep: sdc2-sleep-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-				cmd-pins {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-				data-pins {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-
-			wcss_wlan_default: wcss-wlan-default-state {
-				pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "wcss_wlan";
-				drive-strength = <6>;
-				bias-pull-up;
-			};
-		};
-
-		gcc: clock-controller at 1800000 {
-			compatible = "qcom,gcc-msm8916";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x01800000 0x80000>;
-			clocks = <&xo_board>,
-				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <0>,
-				 <0>,
-				 <0>;
-			clock-names = "xo",
-				      "sleep_clk",
-				      "dsi0pll",
-				      "dsi0pllbyte",
-				      "ext_mclk",
-				      "ext_pri_i2s",
-				      "ext_sec_i2s";
-		};
-
-		tcsr_mutex: hwlock at 1905000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x01905000 0x20000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr: syscon at 1937000 {
-			compatible = "qcom,tcsr-msm8916", "syscon";
-			reg = <0x01937000 0x30000>;
-		};
-
-		mdss: display-subsystem at 1a00000 {
-			status = "disabled";
-			compatible = "qcom,mdss";
-			reg = <0x01a00000 0x1000>,
-			      <0x01ac8000 0x3000>;
-			reg-names = "mdss_phys", "vbif_phys";
-
-			power-domains = <&gcc MDSS_GDSC>;
-
-			clocks = <&gcc GCC_MDSS_AHB_CLK>,
-				 <&gcc GCC_MDSS_AXI_CLK>,
-				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-				      "bus",
-				      "vsync";
-
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			mdss_mdp: display-controller at 1a01000 {
-				compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
-				reg = <0x01a01000 0x89000>;
-				reg-names = "mdp_phys";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0>;
-
-				clocks = <&gcc GCC_MDSS_AHB_CLK>,
-					 <&gcc GCC_MDSS_AXI_CLK>,
-					 <&gcc GCC_MDSS_MDP_CLK>,
-					 <&gcc GCC_MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-					      "bus",
-					      "core",
-					      "vsync";
-
-				iommus = <&apps_iommu 4>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_mdp_intf1_out: endpoint {
-							remote-endpoint = <&mdss_dsi0_in>;
-						};
-					};
-				};
-			};
-
-			mdss_dsi0: dsi at 1a98000 {
-				compatible = "qcom,msm8916-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0x01a98000 0x25c>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
-						  <&gcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
-
-				clocks = <&gcc GCC_MDSS_MDP_CLK>,
-					 <&gcc GCC_MDSS_AHB_CLK>,
-					 <&gcc GCC_MDSS_AXI_CLK>,
-					 <&gcc GCC_MDSS_BYTE0_CLK>,
-					 <&gcc GCC_MDSS_PCLK0_CLK>,
-					 <&gcc GCC_MDSS_ESC0_CLK>;
-				clock-names = "mdp_core",
-					      "iface",
-					      "bus",
-					      "byte",
-					      "pixel",
-					      "core";
-				phys = <&mdss_dsi0_phy>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_dsi0_in: endpoint {
-							remote-endpoint = <&mdss_mdp_intf1_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdss_dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			mdss_dsi0_phy: phy at 1a98300 {
-				compatible = "qcom,dsi-phy-28nm-lp";
-				reg = <0x01a98300 0xd4>,
-				      <0x01a98500 0x280>,
-				      <0x01a98780 0x30>;
-				reg-names = "dsi_pll",
-					    "dsi_phy",
-					    "dsi_phy_regulator";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&gcc GCC_MDSS_AHB_CLK>,
-					 <&xo_board>;
-				clock-names = "iface", "ref";
-			};
-		};
-
-		camss: camss at 1b0ac00 {
-			compatible = "qcom,msm8916-camss";
-			reg = <0x01b0ac00 0x200>,
-				<0x01b00030 0x4>,
-				<0x01b0b000 0x200>,
-				<0x01b00038 0x4>,
-				<0x01b08000 0x100>,
-				<0x01b08400 0x100>,
-				<0x01b0a000 0x500>,
-				<0x01b00020 0x10>,
-				<0x01b10000 0x1000>;
-			reg-names = "csiphy0",
-				"csiphy0_clk_mux",
-				"csiphy1",
-				"csiphy1_clk_mux",
-				"csid0",
-				"csid1",
-				"ispif",
-				"csi_clk_mux",
-				"vfe0";
-			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "csiphy0",
-				"csiphy1",
-				"csid0",
-				"csid1",
-				"ispif",
-				"vfe0";
-			power-domains = <&gcc VFE_GDSC>;
-			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
-				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
-				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
-				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
-				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
-				<&gcc GCC_CAMSS_CSI0_CLK>,
-				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
-				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
-				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
-				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
-				<&gcc GCC_CAMSS_CSI1_CLK>,
-				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
-				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
-				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
-				<&gcc GCC_CAMSS_AHB_CLK>,
-				<&gcc GCC_CAMSS_VFE0_CLK>,
-				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
-				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
-				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
-			clock-names = "top_ahb",
-				"ispif_ahb",
-				"csiphy0_timer",
-				"csiphy1_timer",
-				"csi0_ahb",
-				"csi0",
-				"csi0_phy",
-				"csi0_pix",
-				"csi0_rdi",
-				"csi1_ahb",
-				"csi1",
-				"csi1_phy",
-				"csi1_pix",
-				"csi1_rdi",
-				"ahb",
-				"vfe0",
-				"csi_vfe0",
-				"vfe_ahb",
-				"vfe_axi";
-			iommus = <&apps_iommu 3>;
-			status = "disabled";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-				};
-
-				port at 1 {
-					reg = <1>;
-				};
-			};
-		};
-
-		cci: cci at 1b0c000 {
-			compatible = "qcom,msm8916-cci", "qcom,msm8226-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x01b0c000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
-				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
-				<&gcc GCC_CAMSS_CCI_CLK>,
-				<&gcc GCC_CAMSS_AHB_CLK>;
-			clock-names = "camss_top_ahb", "cci_ahb",
-					  "cci", "camss_ahb";
-			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
-					  <&gcc GCC_CAMSS_CCI_CLK>;
-			assigned-clock-rates = <80000000>, <19200000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&cci0_default>;
-			status = "disabled";
-
-			cci_i2c0: i2c-bus at 0 {
-				reg = <0>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gpu: gpu at 1c00000 {
-			compatible = "qcom,adreno-306.0", "qcom,adreno";
-			reg = <0x01c00000 0x20000>;
-			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "kgsl_3d0_irq";
-			clock-names =
-			    "core",
-			    "iface",
-			    "mem",
-			    "mem_iface",
-			    "alt_mem_iface",
-			    "gfx3d";
-			clocks =
-			    <&gcc GCC_OXILI_GFX3D_CLK>,
-			    <&gcc GCC_OXILI_AHB_CLK>,
-			    <&gcc GCC_OXILI_GMEM_CLK>,
-			    <&gcc GCC_BIMC_GFX_CLK>,
-			    <&gcc GCC_BIMC_GPU_CLK>,
-			    <&gcc GFX3D_CLK_SRC>;
-			power-domains = <&gcc OXILI_GDSC>;
-			operating-points-v2 = <&gpu_opp_table>;
-			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-400000000 {
-					opp-hz = /bits/ 64 <400000000>;
-				};
-				opp-19200000 {
-					opp-hz = /bits/ 64 <19200000>;
-				};
-			};
-		};
-
-		venus: video-codec at 1d00000 {
-			compatible = "qcom,msm8916-venus";
-			reg = <0x01d00000 0xff000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&gcc VENUS_GDSC>;
-			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-				 <&gcc GCC_VENUS0_AHB_CLK>,
-				 <&gcc GCC_VENUS0_AXI_CLK>;
-			clock-names = "core", "iface", "bus";
-			iommus = <&apps_iommu 5>;
-			memory-region = <&venus_mem>;
-			status = "disabled";
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-		};
-
-		apps_iommu: iommu at 1ef0000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#iommu-cells = <1>;
-			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x01e20000 0x20000>;
-			reg = <0x01ef0000 0x3000>;
-			clocks = <&gcc GCC_SMMU_CFG_CLK>,
-				 <&gcc GCC_APSS_TCU_CLK>;
-			clock-names = "iface", "bus";
-			qcom,iommu-secure-id = <17>;
-
-			/* VFE */
-			iommu-ctx at 3000 {
-				compatible = "qcom,msm-iommu-v1-sec";
-				reg = <0x3000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			/* MDP_0 */
-			iommu-ctx at 4000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x4000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			/* VENUS_NS */
-			iommu-ctx at 5000 {
-				compatible = "qcom,msm-iommu-v1-sec";
-				reg = <0x5000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		gpu_iommu: iommu at 1f08000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			#iommu-cells = <1>;
-			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-			ranges = <0 0x01f08000 0x10000>;
-			clocks = <&gcc GCC_SMMU_CFG_CLK>,
-				 <&gcc GCC_GFX_TCU_CLK>;
-			clock-names = "iface", "bus";
-			qcom,iommu-secure-id = <18>;
-
-			/* GFX3D_USER */
-			iommu-ctx at 1000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x1000 0x1000>;
-				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			/* GFX3D_PRIV */
-			iommu-ctx at 2000 {
-				compatible = "qcom,msm-iommu-v1-ns";
-				reg = <0x2000 0x1000>;
-				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-
-		spmi_bus: spmi at 200f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0200f000 0x001000>,
-			      <0x02400000 0x400000>,
-			      <0x02c00000 0x400000>,
-			      <0x03800000 0x200000>,
-			      <0x0200a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		bam_dmux_dma: dma-controller at 4044000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x04044000 0x19000>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-
-			num-channels = <6>;
-			qcom,num-ees = <1>;
-			qcom,powered-remotely;
-
-			status = "disabled";
-		};
-
-		mpss: remoteproc at 4080000 {
-			compatible = "qcom,msm8916-mss-pil";
-			reg = <0x04080000 0x100>,
-			      <0x04020000 0x040>;
-
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
-					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			power-domains = <&rpmpd MSM8916_VDDCX>,
-					<&rpmpd MSM8916_VDDMX>;
-			power-domain-names = "cx", "mx";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "bus", "mem", "xo";
-
-			qcom,smem-states = <&hexagon_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&scm 0>;
-			reset-names = "mss_restart";
-
-			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
-
-			status = "disabled";
-
-			mba {
-				memory-region = <&mba_mem>;
-			};
-
-			mpss {
-				memory-region = <&mpss_mem>;
-			};
-
-			bam_dmux: bam-dmux {
-				compatible = "qcom,bam-dmux";
-
-				interrupt-parent = <&hexagon_smsm>;
-				interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
-				interrupt-names = "pc", "pc-ack";
-
-				qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
-				qcom,smem-state-names = "pc", "pc-ack";
-
-				dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
-				dma-names = "tx", "rx";
-
-				status = "disabled";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,smd-edge = <0>;
-				qcom,ipc = <&apcs 8 12>;
-				qcom,remote-pid = <1>;
-
-				label = "hexagon";
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,smd-channels = "fastrpcsmd-apps-dsp";
-					label = "adsp";
-					qcom,non-secure-domain;
-
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					cb at 1 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <1>;
-					};
-				};
-			};
-		};
-
-		sound: sound at 7702000 {
-			status = "disabled";
-			compatible = "qcom,apq8016-sbc-sndcard";
-			reg = <0x07702000 0x4>, <0x07702004 0x4>;
-			reg-names = "mic-iomux", "spkr-iomux";
-		};
-
-		lpass: audio-controller at 7708000 {
-			status = "disabled";
-			compatible = "qcom,apq8016-lpass-cpu";
-
-			/*
-			 * Note: Unlike the name would suggest, the SEC_I2S_CLK
-			 * is actually only used by Tertiary MI2S while
-			 * Primary/Secondary MI2S both use the PRI_I2S_CLK.
-			 */
-			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
-				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>;
-
-			clock-names = "ahbix-clk",
-					"mi2s-bit-clk0",
-					"mi2s-bit-clk1",
-					"mi2s-bit-clk2",
-					"mi2s-bit-clk3",
-					"pcnoc-mport-clk",
-					"pcnoc-sway-clk";
-			#sound-dai-cells = <1>;
-
-			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x07708000 0x10000>;
-			reg-names = "lpass-lpaif";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lpass_codec: audio-codec at 771c000 {
-			compatible = "qcom,msm8916-wcd-digital-codec";
-			reg = <0x0771c000 0x400>;
-			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
-				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
-			clock-names = "ahbix-clk", "mclk";
-			#sound-dai-cells = <1>;
-			status = "disabled";
-		};
-
-		sdhc_1: mmc at 7824900 {
-			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
-			reg-names = "hc", "core";
-
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			pinctrl-0 = <&sdc1_default>;
-			pinctrl-1 = <&sdc1_sleep>;
-			pinctrl-names = "default", "sleep";
-			mmc-ddr-1_8v;
-			bus-width = <8>;
-			non-removable;
-			status = "disabled";
-		};
-
-		sdhc_2: mmc at 7864900 {
-			compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
-			reg-names = "hc", "core";
-
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-			pinctrl-0 = <&sdc2_default>;
-			pinctrl-1 = <&sdc2_sleep>;
-			pinctrl-names = "default", "sleep";
-			bus-width = <4>;
-			status = "disabled";
-		};
-
-		blsp_dma: dma-controller at 7884000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07884000 0x23000>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		blsp_uart1: serial at 78af000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078af000 0x200>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 0>, <&blsp_dma 1>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart1_default>;
-			pinctrl-1 = <&blsp_uart1_sleep>;
-			status = "disabled";
-		};
-
-		blsp_uart2: serial at 78b0000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078b0000 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 2>, <&blsp_dma 3>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_uart2_default>;
-			pinctrl-1 = <&blsp_uart2_sleep>;
-			status = "disabled";
-		};
-
-		blsp_i2c1: i2c at 78b5000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b5000 0x500>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c1_default>;
-			pinctrl-1 = <&blsp_i2c1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi1: spi at 78b5000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b5000 0x500>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 4>, <&blsp_dma 5>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi1_default>;
-			pinctrl-1 = <&blsp_spi1_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c2: i2c at 78b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c2_default>;
-			pinctrl-1 = <&blsp_i2c2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi2: spi at 78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b6000 0x500>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 6>, <&blsp_dma 7>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi2_default>;
-			pinctrl-1 = <&blsp_spi2_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c3: i2c at 78b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b7000 0x500>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c3_default>;
-			pinctrl-1 = <&blsp_i2c3_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi3: spi at 78b7000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b7000 0x500>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 8>, <&blsp_dma 9>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi3_default>;
-			pinctrl-1 = <&blsp_spi3_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c4: i2c at 78b8000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c4_default>;
-			pinctrl-1 = <&blsp_i2c4_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi4: spi at 78b8000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b8000 0x500>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 10>, <&blsp_dma 11>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi4_default>;
-			pinctrl-1 = <&blsp_spi4_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c5: i2c at 78b9000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b9000 0x500>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c5_default>;
-			pinctrl-1 = <&blsp_i2c5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi5: spi at 78b9000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b9000 0x500>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi5_default>;
-			pinctrl-1 = <&blsp_spi5_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_i2c6: i2c at 78ba000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_i2c6_default>;
-			pinctrl-1 = <&blsp_i2c6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp_spi6: spi at 78ba000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078ba000 0x500>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp_spi6_default>;
-			pinctrl-1 = <&blsp_spi6_sleep>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb: usb at 78d9000 {
-			compatible = "qcom,ci-hdrc";
-			reg = <0x078d9000 0x200>,
-			      <0x078d9200 0x200>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
-				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			clock-names = "iface", "core";
-			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <80000000>;
-			resets = <&gcc GCC_USB_HS_BCR>;
-			reset-names = "core";
-			phy_type = "ulpi";
-			dr_mode = "otg";
-			hnp-disable;
-			srp-disable;
-			adp-disable;
-			ahb-burst-config = <0>;
-			phy-names = "usb-phy";
-			phys = <&usb_hs_phy>;
-			status = "disabled";
-			#reset-cells = <1>;
-
-			ulpi {
-				usb_hs_phy: phy {
-					compatible = "qcom,usb-hs-phy-msm8916",
-						     "qcom,usb-hs-phy";
-					#phy-cells = <0>;
-					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-					clock-names = "ref", "sleep";
-					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
-					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44>,
-								 <0x1 0x6b>,
-								 <0x2 0x24>,
-								 <0x3 0x13>;
-				};
-			};
-		};
-
-		wcnss: remoteproc at a204000 {
-			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
-			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
-			reg-names = "ccu", "dxe", "pmu";
-
-			memory-region = <&wcnss_mem>;
-
-			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-			power-domains = <&rpmpd MSM8916_VDDCX>,
-					<&rpmpd MSM8916_VDDMX>;
-			power-domain-names = "cx", "mx";
-
-			qcom,smem-states = <&wcnss_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			pinctrl-names = "default";
-			pinctrl-0 = <&wcss_wlan_default>;
-
-			status = "disabled";
-
-			wcnss_iris: iris {
-				/* Separate chip, compatible is board-specific */
-				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
-				clock-names = "xo";
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,ipc = <&apcs 8 17>;
-				qcom,smd-edge = <6>;
-				qcom,remote-pid = <4>;
-
-				label = "pronto";
-
-				wcnss_ctrl: wcnss {
-					compatible = "qcom,wcnss";
-					qcom,smd-channels = "WCNSS_CTRL";
-
-					qcom,mmio = <&wcnss>;
-
-					wcnss_bt: bluetooth {
-						compatible = "qcom,wcnss-bt";
-					};
-
-					wcnss_wifi: wifi {
-						compatible = "qcom,wcnss-wlan";
-
-						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
-						interrupt-names = "tx", "rx";
-
-						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
-						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller at b000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>,
-			      <0x0b001000 0x1000>, <0x0b004000 0x2000>;
-			interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		apcs: mailbox at b011000 {
-			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
-			reg = <0x0b011000 0x1000>;
-			#mbox-cells = <1>;
-			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
-			clock-names = "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		a53pll: clock at b016000 {
-			compatible = "qcom,msm8916-a53pll";
-			reg = <0x0b016000 0x40>;
-			#clock-cells = <0>;
-			clocks = <&xo_board>;
-			clock-names = "xo";
-		};
-
-		timer at b020000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x0b020000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame at b021000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b021000 0x1000>,
-				      <0x0b022000 0x1000>;
-			};
-
-			frame at b023000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b023000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b024000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b024000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b025000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b025000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b026000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b026000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b027000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b027000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b028000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b028000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		cpu0_acc: power-manager at b088000 {
-			compatible = "qcom,msm8916-acc";
-			reg = <0x0b088000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu0_saw: power-manager at b089000 {
-			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
-			reg = <0x0b089000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu1_acc: power-manager at b098000 {
-			compatible = "qcom,msm8916-acc";
-			reg = <0x0b098000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu1_saw: power-manager at b099000 {
-			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
-			reg = <0x0b099000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu2_acc: power-manager at b0a8000 {
-			compatible = "qcom,msm8916-acc";
-			reg = <0x0b0a8000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu2_saw: power-manager at b0a9000 {
-			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
-			reg = <0x0b0a9000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu3_acc: power-manager at b0b8000 {
-			compatible = "qcom,msm8916-acc";
-			reg = <0x0b0b8000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-
-		cpu3_saw: power-manager at b0b9000 {
-			compatible = "qcom,msm8916-saw2-v3.0-cpu", "qcom,saw2";
-			reg = <0x0b0b9000 0x1000>;
-			status = "reserved"; /* Controlled by PSCI firmware */
-		};
-	};
-
-	thermal-zones {
-		cpu0-1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu0_1_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu0_1_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_1_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu2-3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu2_3_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu2_3_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_3_alert0>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				gpu_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				gpu_crit: gpu-crit {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cam_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				modem_alert0: trip-point0 {
-					temperature = <85000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-};
diff --git a/arch/arm/dts/msm8996.dtsi b/arch/arm/dts/msm8996.dtsi
deleted file mode 100644
index 6ba9da9e6a8b..000000000000
--- a/arch/arm/dts/msm8996.dtsi
+++ /dev/null
@@ -1,3884 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8996.h>
-#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/interconnect/qcom,msm8996.h>
-#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
-#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/soc/qcom,apr.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-			clock-output-names = "xo_board";
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-			clock-output-names = "sleep_clk";
-		};
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu at 0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			clocks = <&kryocc 0>;
-			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-			};
-		};
-
-		CPU1: cpu at 1 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			clocks = <&kryocc 0>;
-			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-		};
-
-		CPU2: cpu at 100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			clocks = <&kryocc 1>;
-			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-			};
-		};
-
-		CPU3: cpu at 101 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			capacity-dmips-mhz = <1024>;
-			clocks = <&kryocc 1>;
-			interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&CPU2>;
-				};
-
-				core1 {
-					cpu = <&CPU3>;
-				};
-			};
-		};
-
-		idle-states {
-			entry-method = "psci";
-
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "standalone-power-collapse";
-				arm,psci-suspend-param = <0x00000004>;
-				entry-latency-us = <130>;
-				exit-latency-us = <80>;
-				min-residency-us = <300>;
-			};
-		};
-	};
-
-	cluster0_opp: opp-table-cluster0 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		/* Nominal fmax for now */
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-422400000 {
-			opp-hz = /bits/ 64 <422400000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <384000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <460800>;
-		};
-		opp-844800000 {
-			opp-hz = /bits/ 64 <844800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <537600>;
-		};
-		opp-960000000 {
-			opp-hz = /bits/ 64 <960000000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <672000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <672000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <825600>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <825600>;
-		};
-		opp-1228800000 {
-			opp-hz = /bits/ 64 <1228800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <902400>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0xd>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1056000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-supported-hw = <0x2>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1132800>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0xd>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1132800>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0x9>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1190400>;
-		};
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			opp-supported-hw = <0x04>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1305600>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-supported-hw = <0x9>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1382400>;
-		};
-	};
-
-	cluster1_opp: opp-table-cluster1 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		/* Nominal fmax for now */
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <307200>;
-		};
-		opp-806400000 {
-			opp-hz = /bits/ 64 <806400000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <384000>;
-		};
-		opp-883200000 {
-			opp-hz = /bits/ 64 <883200000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <460800>;
-		};
-		opp-940800000 {
-			opp-hz = /bits/ 64 <940800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <537600>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <595200>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <672000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <672000>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <748800>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <825600>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <902400>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <979200>;
-		};
-		opp-1555200000 {
-			opp-hz = /bits/ 64 <1555200000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1056000>;
-		};
-		opp-1632000000 {
-			opp-hz = /bits/ 64 <1632000000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1190400>;
-		};
-		opp-1708800000 {
-			opp-hz = /bits/ 64 <1708800000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1228800>;
-		};
-		opp-1785600000 {
-			opp-hz = /bits/ 64 <1785600000>;
-			opp-supported-hw = <0xf>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1305600>;
-		};
-		opp-1804800000 {
-			opp-hz = /bits/ 64 <1804800000>;
-			opp-supported-hw = <0xe>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1305600>;
-		};
-		opp-1824000000 {
-			opp-hz = /bits/ 64 <1824000000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1382400>;
-		};
-		opp-1900800000 {
-			opp-hz = /bits/ 64 <1900800000>;
-			opp-supported-hw = <0x4>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1305600>;
-		};
-		opp-1920000000 {
-			opp-hz = /bits/ 64 <1920000000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1459200>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1593600>;
-		};
-		opp-2073600000 {
-			opp-hz = /bits/ 64 <2073600000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1593600>;
-		};
-		opp-2150400000 {
-			opp-hz = /bits/ 64 <2150400000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-			opp-peak-kBps = <1593600>;
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-msm8996", "qcom,scm";
-			qcom,dload-mode = <&tcsr_2 0x13000>;
-		};
-	};
-
-	memory at 80000000 {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the reg */
-		reg = <0x0 0x80000000 0x0 0x0>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	rpm: remoteproc {
-		compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
-
-		glink-edge {
-			compatible = "qcom,glink-rpm";
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,rpm-msg-ram = <&rpm_msg_ram>;
-			mboxes = <&apcs_glb 0>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-msm8996";
-				qcom,glink-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clocks = <&xo_board>;
-					clock-names = "xo";
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,msm8996-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp1: opp1 {
-							opp-level = <1>;
-						};
-
-						rpmpd_opp2: opp2 {
-							opp-level = <2>;
-						};
-
-						rpmpd_opp3: opp3 {
-							opp-level = <3>;
-						};
-
-						rpmpd_opp4: opp4 {
-							opp-level = <4>;
-						};
-
-						rpmpd_opp5: opp5 {
-							opp-level = <5>;
-						};
-
-						rpmpd_opp6: opp6 {
-							opp-level = <6>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		hyp_mem: memory at 85800000 {
-			reg = <0x0 0x85800000 0x0 0x600000>;
-			no-map;
-		};
-
-		xbl_mem: memory at 85e00000 {
-			reg = <0x0 0x85e00000 0x0 0x200000>;
-			no-map;
-		};
-
-		smem_mem: smem-mem at 86000000 {
-			reg = <0x0 0x86000000 0x0 0x200000>;
-			no-map;
-		};
-
-		tz_mem: memory at 86200000 {
-			reg = <0x0 0x86200000 0x0 0x2600000>;
-			no-map;
-		};
-
-		rmtfs_mem: rmtfs {
-			compatible = "qcom,rmtfs-mem";
-
-			size = <0x0 0x200000>;
-			alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
-		};
-
-		mpss_mem: mpss at 88800000 {
-			reg = <0x0 0x88800000 0x0 0x6200000>;
-			no-map;
-		};
-
-		adsp_mem: adsp at 8ea00000 {
-			reg = <0x0 0x8ea00000 0x0 0x1b00000>;
-			no-map;
-		};
-
-		slpi_mem: slpi at 90500000 {
-			reg = <0x0 0x90500000 0x0 0xa00000>;
-			no-map;
-		};
-
-		gpu_mem: gpu at 90f00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x90f00000 0x0 0x100000>;
-			no-map;
-		};
-
-		venus_mem: venus at 91000000 {
-			reg = <0x0 0x91000000 0x0 0x500000>;
-			no-map;
-		};
-
-		mba_mem: mba at 91500000 {
-			reg = <0x0 0x91500000 0x0 0x200000>;
-			no-map;
-		};
-
-		mdata_mem: mpss-metadata {
-			alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
-			size = <0x0 0x4000>;
-			no-map;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	smp2p-adsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
-		mboxes = <&apcs_glb 10>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-mpss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-
-		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
-
-		mboxes = <&apcs_glb 14>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		mpss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		mpss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-slpi {
-		compatible = "qcom,smp2p";
-		qcom,smem = <481>, <430>;
-
-		interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
-
-		mboxes = <&apcs_glb 26>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <3>;
-
-		slpi_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		slpi_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc at 0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xffffffff>;
-		compatible = "simple-bus";
-
-		pcie_phy: phy-wrapper at 34000 {
-			compatible = "qcom,msm8996-qmp-pcie-phy";
-			reg = <0x00034000 0x488>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x00034000 0x4000>;
-
-			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
-				<&gcc GCC_PCIE_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_PCIE_PHY_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_BCR>,
-				<&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
-			reset-names = "phy", "common", "cfg";
-
-			status = "disabled";
-
-			pciephy_0: phy at 1000 {
-				reg = <0x1000 0x130>,
-				      <0x1200 0x200>,
-				      <0x1400 0x1dc>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-				resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-				reset-names = "lane0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk_src";
-
-				#phy-cells = <0>;
-			};
-
-			pciephy_1: phy at 2000 {
-				reg = <0x2000 0x130>,
-				      <0x2200 0x200>,
-				      <0x2400 0x1dc>;
-
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe1";
-				resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-				reset-names = "lane1";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk_src";
-
-				#phy-cells = <0>;
-			};
-
-			pciephy_2: phy at 3000 {
-				reg = <0x3000 0x130>,
-				      <0x3200 0x200>,
-				      <0x3400 0x1dc>;
-
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe2";
-				resets = <&gcc GCC_PCIE_2_PHY_BCR>;
-				reset-names = "lane2";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_2_pipe_clk_src";
-
-				#phy-cells = <0>;
-			};
-		};
-
-		rpm_msg_ram: sram at 68000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0x00068000 0x6000>;
-		};
-
-		qfprom at 74000 {
-			compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
-			reg = <0x00074000 0x8ff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qusb2p_hstx_trim: hstx_trim at 24e {
-				reg = <0x24e 0x2>;
-				bits = <5 4>;
-			};
-
-			qusb2s_hstx_trim: hstx_trim at 24f {
-				reg = <0x24f 0x1>;
-				bits = <1 4>;
-			};
-
-			speedbin_efuse: speedbin at 133 {
-				reg = <0x133 0x1>;
-				bits = <5 3>;
-			};
-		};
-
-		rng: rng at 83000 {
-			compatible = "qcom,prng-ee";
-			reg = <0x00083000 0x1000>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		gcc: clock-controller at 300000 {
-			compatible = "qcom,gcc-msm8996";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x00300000 0x90000>;
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
-				 <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&sleep_clk>,
-				 <&pciephy_0>,
-				 <&pciephy_1>,
-				 <&pciephy_2>,
-				 <&ssusb_phy_0>,
-				 <&ufsphy_lane 0>,
-				 <&ufsphy_lane 1>,
-				 <&ufsphy_lane 2>;
-			clock-names = "cxo",
-				      "cxo2",
-				      "sleep_clk",
-				      "pcie_0_pipe_clk_src",
-				      "pcie_1_pipe_clk_src",
-				      "pcie_2_pipe_clk_src",
-				      "usb3_phy_pipe_clk_src",
-				      "ufs_rx_symbol_0_clk_src",
-				      "ufs_rx_symbol_1_clk_src",
-				      "ufs_tx_symbol_0_clk_src";
-		};
-
-		bimc: interconnect at 408000 {
-			compatible = "qcom,msm8996-bimc";
-			reg = <0x00408000 0x5a000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
-		tsens0: thermal-sensor at 4a9000 {
-			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
-			reg = <0x004a9000 0x1000>, /* TM */
-			      <0x004a8000 0x1000>; /* SROT */
-			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		tsens1: thermal-sensor at 4ad000 {
-			compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
-			reg = <0x004ad000 0x1000>, /* TM */
-			      <0x004ac000 0x1000>; /* SROT */
-			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		cryptobam: dma-controller at 644000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x00644000 0x24000>;
-			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_CE1_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-		};
-
-		crypto: crypto at 67a000 {
-			compatible = "qcom,crypto-v5.4";
-			reg = <0x0067a000 0x6000>;
-			clocks = <&gcc GCC_CE1_AHB_CLK>,
-				 <&gcc GCC_CE1_AXI_CLK>,
-				 <&gcc GCC_CE1_CLK>;
-			clock-names = "iface", "bus", "core";
-			dmas = <&cryptobam 6>, <&cryptobam 7>;
-			dma-names = "rx", "tx";
-		};
-
-		cnoc: interconnect at 500000 {
-			compatible = "qcom,msm8996-cnoc";
-			reg = <0x00500000 0x1000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-				 <&rpmcc RPM_SMD_CNOC_A_CLK>;
-		};
-
-		snoc: interconnect at 524000 {
-			compatible = "qcom,msm8996-snoc";
-			reg = <0x00524000 0x1c000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
-
-		a0noc: interconnect at 543000 {
-			compatible = "qcom,msm8996-a0noc";
-			reg = <0x00543000 0x6000>;
-			#interconnect-cells = <1>;
-			clock-names = "aggre0_snoc_axi",
-				      "aggre0_cnoc_ahb",
-				      "aggre0_noc_mpu_cfg";
-			clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
-				 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
-				 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
-			power-domains = <&gcc AGGRE0_NOC_GDSC>;
-		};
-
-		a1noc: interconnect at 562000 {
-			compatible = "qcom,msm8996-a1noc";
-			reg = <0x00562000 0x5000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
-		};
-
-		a2noc: interconnect at 583000 {
-			compatible = "qcom,msm8996-a2noc";
-			reg = <0x00583000 0x7000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
-			clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-				 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-				 <&gcc GCC_UFS_AXI_CLK>;
-		};
-
-		mnoc: interconnect at 5a4000 {
-			compatible = "qcom,msm8996-mnoc";
-			reg = <0x005a4000 0x1c000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a", "iface";
-			clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
-				 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
-				 <&mmcc AHB_CLK_SRC>;
-		};
-
-		pnoc: interconnect at 5c0000 {
-			compatible = "qcom,msm8996-pnoc";
-			reg = <0x005c0000 0x3000>;
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
-		};
-
-		tcsr_mutex: hwlock at 740000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x00740000 0x20000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr_1: syscon at 760000 {
-			compatible = "qcom,tcsr-msm8996", "syscon";
-			reg = <0x00760000 0x20000>;
-		};
-
-		tcsr_2: syscon at 7a0000 {
-			compatible = "qcom,tcsr-msm8996", "syscon";
-			reg = <0x007a0000 0x18000>;
-		};
-
-		mmcc: clock-controller at 8c0000 {
-			compatible = "qcom,mmcc-msm8996";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0x008c0000 0x40000>;
-			clocks = <&xo_board>,
-				 <&gcc GPLL0>,
-				 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_hdmi_phy>;
-			clock-names = "xo",
-				      "gpll0",
-				      "gcc_mmss_noc_cfg_ahb_clk",
-				      "dsi0pll",
-				      "dsi0pllbyte",
-				      "dsi1pll",
-				      "dsi1pllbyte",
-				      "hdmipll";
-			assigned-clocks = <&mmcc MMPLL9_PLL>,
-					  <&mmcc MMPLL1_PLL>,
-					  <&mmcc MMPLL3_PLL>,
-					  <&mmcc MMPLL4_PLL>,
-					  <&mmcc MMPLL5_PLL>;
-			assigned-clock-rates = <624000000>,
-					       <810000000>,
-					       <980000000>,
-					       <960000000>,
-					       <825000000>;
-		};
-
-		mdss: display-subsystem at 900000 {
-			compatible = "qcom,mdss";
-
-			reg = <0x00900000 0x1000>,
-			      <0x009b0000 0x1040>,
-			      <0x009b8000 0x1040>;
-			reg-names = "mdss_phys",
-				    "vbif_phys",
-				    "vbif_nrt_phys";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			clocks = <&mmcc MDSS_AHB_CLK>,
-				 <&mmcc MDSS_MDP_CLK>;
-			clock-names = "iface", "core";
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			status = "disabled";
-
-			mdp: display-controller at 901000 {
-				compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
-				reg = <0x00901000 0x90000>;
-				reg-names = "mdp_phys";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc SMMU_MDP_AXI_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				clock-names = "iface",
-					      "bus",
-					      "core",
-					      "iommu",
-					      "vsync";
-
-				iommus = <&mdp_smmu 0>;
-
-				assigned-clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <300000000>,
-					 <19200000>;
-
-				interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
-						<&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
-						<&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
-				interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdp5_intf3_out: endpoint {
-							remote-endpoint = <&mdss_hdmi_in>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdp5_intf1_out: endpoint {
-							remote-endpoint = <&mdss_dsi0_in>;
-						};
-					};
-
-					port at 2 {
-						reg = <2>;
-						mdp5_intf2_out: endpoint {
-							remote-endpoint = <&mdss_dsi1_in>;
-						};
-					};
-				};
-			};
-
-			mdss_dsi0: dsi at 994000 {
-				compatible = "qcom,msm8996-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0x00994000 0x400>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_BYTE0_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MMSS_MISC_AHB_CLK>,
-					 <&mmcc MDSS_PCLK0_CLK>,
-					 <&mmcc MDSS_ESC0_CLK>;
-				clock-names = "mdp_core",
-					      "byte",
-					      "iface",
-					      "bus",
-					      "core_mmss",
-					      "pixel",
-					      "core";
-				assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
-				phys = <&mdss_dsi0_phy>;
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_dsi0_in: endpoint {
-							remote-endpoint = <&mdp5_intf1_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdss_dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			mdss_dsi0_phy: phy at 994400 {
-				compatible = "qcom,dsi-phy-14nm";
-				reg = <0x00994400 0x100>,
-				      <0x00994500 0x300>,
-				      <0x00994800 0x188>;
-				reg-names = "dsi_phy",
-					    "dsi_phy_lane",
-					    "dsi_pll";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
-				clock-names = "iface", "ref";
-				status = "disabled";
-			};
-
-			mdss_dsi1: dsi at 996000 {
-				compatible = "qcom,msm8996-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0x00996000 0x400>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <5>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_BYTE1_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_AXI_CLK>,
-					 <&mmcc MMSS_MISC_AHB_CLK>,
-					 <&mmcc MDSS_PCLK1_CLK>,
-					 <&mmcc MDSS_ESC1_CLK>;
-				clock-names = "mdp_core",
-					      "byte",
-					      "iface",
-					      "bus",
-					      "core_mmss",
-					      "pixel",
-					      "core";
-				assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
-
-				phys = <&mdss_dsi1_phy>;
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_dsi1_in: endpoint {
-							remote-endpoint = <&mdp5_intf2_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdss_dsi1_out: endpoint {
-						};
-					};
-				};
-			};
-
-			mdss_dsi1_phy: phy at 996400 {
-				compatible = "qcom,dsi-phy-14nm";
-				reg = <0x00996400 0x100>,
-				      <0x00996500 0x300>,
-				      <0x00996800 0x188>;
-				reg-names = "dsi_phy",
-					    "dsi_phy_lane",
-					    "dsi_pll";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
-				clock-names = "iface", "ref";
-				status = "disabled";
-			};
-
-			mdss_hdmi: hdmi-tx at 9a0000 {
-				compatible = "qcom,hdmi-tx-8996";
-				reg = <0x009a0000 0x50c>,
-				      <0x00070000 0x6158>,
-				      <0x009e0000 0xfff>;
-				reg-names = "core_physical",
-					    "qfprom_physical",
-					    "hdcp_physical";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <8>;
-
-				clocks = <&mmcc MDSS_MDP_CLK>,
-					 <&mmcc MDSS_AHB_CLK>,
-					 <&mmcc MDSS_HDMI_CLK>,
-					 <&mmcc MDSS_HDMI_AHB_CLK>,
-					 <&mmcc MDSS_EXTPCLK_CLK>;
-				clock-names =
-					"mdp_core",
-					"iface",
-					"core",
-					"alt_iface",
-					"extp";
-
-				phys = <&mdss_hdmi_phy>;
-				#sound-dai-cells = <1>;
-
-				status = "disabled";
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_hdmi_in: endpoint {
-							remote-endpoint = <&mdp5_intf3_out>;
-						};
-					};
-				};
-			};
-
-			mdss_hdmi_phy: phy at 9a0600 {
-				#phy-cells = <0>;
-				compatible = "qcom,hdmi-phy-8996";
-				reg = <0x009a0600 0x1c4>,
-				      <0x009a0a00 0x124>,
-				      <0x009a0c00 0x124>,
-				      <0x009a0e00 0x124>,
-				      <0x009a1000 0x124>,
-				      <0x009a1200 0x0c8>;
-				reg-names = "hdmi_pll",
-					    "hdmi_tx_l0",
-					    "hdmi_tx_l1",
-					    "hdmi_tx_l2",
-					    "hdmi_tx_l3",
-					    "hdmi_phy";
-
-				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&gcc GCC_HDMI_CLKREF_CLK>,
-					 <&xo_board>;
-				clock-names = "iface",
-					      "ref",
-					      "xo";
-
-				#clock-cells = <0>;
-
-				status = "disabled";
-			};
-		};
-
-		gpu: gpu at b00000 {
-			compatible = "qcom,adreno-530.2", "qcom,adreno";
-
-			reg = <0x00b00000 0x3f000>;
-			reg-names = "kgsl_3d0_reg_memory";
-
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&mmcc GPU_GX_GFX3D_CLK>,
-				<&mmcc GPU_AHB_CLK>,
-				<&mmcc GPU_GX_RBBMTIMER_CLK>,
-				<&gcc GCC_BIMC_GFX_CLK>,
-				<&gcc GCC_MMSS_BIMC_GFX_CLK>;
-
-			clock-names = "core",
-				"iface",
-				"rbbmtimer",
-				"mem",
-				"mem_iface";
-
-			interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
-			interconnect-names = "gfx-mem";
-
-			power-domains = <&mmcc GPU_GX_GDSC>;
-			iommus = <&adreno_smmu 0>;
-
-			nvmem-cells = <&speedbin_efuse>;
-			nvmem-cell-names = "speed_bin";
-
-			operating-points-v2 = <&gpu_opp_table>;
-
-			status = "disabled";
-
-			#cooling-cells = <2>;
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/*
-				 * 624Mhz is only available on speed bins 0 and 3.
-				 * 560Mhz is only available on speed bins 0, 2 and 3.
-				 * All the rest are available on all bins of the hardware.
-				 */
-				opp-624000000 {
-					opp-hz = /bits/ 64 <624000000>;
-					opp-supported-hw = <0x09>;
-				};
-				opp-560000000 {
-					opp-hz = /bits/ 64 <560000000>;
-					opp-supported-hw = <0x0d>;
-				};
-				opp-510000000 {
-					opp-hz = /bits/ 64 <510000000>;
-					opp-supported-hw = <0xff>;
-				};
-				opp-401800000 {
-					opp-hz = /bits/ 64 <401800000>;
-					opp-supported-hw = <0xff>;
-				};
-				opp-315000000 {
-					opp-hz = /bits/ 64 <315000000>;
-					opp-supported-hw = <0xff>;
-				};
-				opp-214000000 {
-					opp-hz = /bits/ 64 <214000000>;
-					opp-supported-hw = <0xff>;
-				};
-				opp-133000000 {
-					opp-hz = /bits/ 64 <133000000>;
-					opp-supported-hw = <0xff>;
-				};
-			};
-
-			zap-shader {
-				memory-region = <&gpu_mem>;
-			};
-		};
-
-		tlmm: pinctrl at 1010000 {
-			compatible = "qcom,msm8996-pinctrl";
-			reg = <0x01010000 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 150>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			blsp1_spi1_default: blsp1-spi1-default-state {
-				spi-pins {
-					pins = "gpio0", "gpio1", "gpio3";
-					function = "blsp_spi1";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				cs-pins {
-					pins = "gpio2";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp1_spi1_sleep: blsp1-spi1-sleep-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
-				pins = "gpio4", "gpio5";
-				function = "blsp_uart8";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
-				pins = "gpio4", "gpio5";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c2_default: blsp2-i2c2-state {
-				pins = "gpio6", "gpio7";
-				function = "blsp_i2c8";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
-				pins = "gpio6", "gpio7";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c6_default: blsp1-i2c6-state {
-				pins = "gpio27", "gpio28";
-				function = "blsp_i2c6";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
-				pins = "gpio27", "gpio28";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			cci0_default: cci0-default-state {
-				pins = "gpio17", "gpio18";
-				function = "cci_i2c";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			camera0_state_on:
-			camera_rear_default: camera-rear-default-state {
-				camera0_mclk: mclk0-pins {
-					pins = "gpio13";
-					function = "cam_mclk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				camera0_rst: rst-pins {
-					pins = "gpio25";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				camera0_pwdn: pwdn-pins {
-					pins = "gpio26";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			cci1_default: cci1-default-state {
-				pins = "gpio19", "gpio20";
-				function = "cci_i2c";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			camera1_state_on:
-			camera_board_default: camera-board-default-state {
-				mclk1-pins {
-					pins = "gpio14";
-					function = "cam_mclk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				pwdn-pins {
-					pins = "gpio98";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				rst-pins {
-					pins = "gpio104";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			camera2_state_on:
-			camera_front_default: camera-front-default-state {
-				camera2_mclk: mclk2-pins {
-					pins = "gpio15";
-					function = "cam_mclk";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				camera2_rst: rst-pins {
-					pins = "gpio23";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-
-				pwdn-pins {
-					pins = "gpio133";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-				};
-			};
-
-			pcie0_state_on: pcie0-state-on-state {
-				perst-pins {
-					pins = "gpio35";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-
-				clkreq-pins {
-					pins = "gpio36";
-					function = "pci_e0";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				wake-pins {
-					pins = "gpio37";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			pcie0_state_off: pcie0-state-off-state {
-				perst-pins {
-					pins = "gpio35";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-
-				clkreq-pins {
-					pins = "gpio36";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				wake-pins {
-					pins = "gpio37";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			blsp1_uart2_default: blsp1-uart2-default-state {
-				pins = "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "blsp_uart2";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp1_uart2_sleep: blsp1-uart2-sleep-state {
-				pins = "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_default: blsp1-i2c3-default-state {
-				pins = "gpio47", "gpio48";
-				function = "blsp_i2c3";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
-				pins = "gpio47", "gpio48";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
-				pins = "gpio49", "gpio50", "gpio51", "gpio52";
-				function = "blsp_uart9";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
-				pins = "gpio49", "gpio50", "gpio51", "gpio52";
-				function = "blsp_uart9";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c3_default: blsp2-i2c3-state-state {
-				pins = "gpio51", "gpio52";
-				function = "blsp_i2c9";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
-				pins = "gpio51", "gpio52";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			wcd_intr_default: wcd-intr-default-state {
-				pins = "gpio54";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp2_i2c1_default: blsp2-i2c1-state {
-				pins = "gpio55", "gpio56";
-				function = "blsp_i2c7";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
-				pins = "gpio55", "gpio56";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			blsp2_i2c5_default: blsp2-i2c5-state {
-				pins = "gpio60", "gpio61";
-				function = "blsp_i2c11";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			/* Sleep state for BLSP2_I2C5 is missing.. */
-
-			cdc_reset_active: cdc-reset-active-state {
-				pins = "gpio64";
-				function = "gpio";
-				drive-strength = <16>;
-				bias-pull-down;
-				output-high;
-			};
-
-			cdc_reset_sleep: cdc-reset-sleep-state {
-				pins = "gpio64";
-				function = "gpio";
-				drive-strength = <16>;
-				bias-disable;
-				output-low;
-			};
-
-			blsp2_spi6_default: blsp2-spi6-default-state {
-				spi-pins {
-					pins = "gpio85", "gpio86", "gpio88";
-					function = "blsp_spi12";
-					drive-strength = <12>;
-					bias-disable;
-				};
-
-				cs-pins {
-					pins = "gpio87";
-					function = "gpio";
-					drive-strength = <16>;
-					bias-disable;
-					output-high;
-				};
-			};
-
-			blsp2_spi6_sleep: blsp2-spi6-sleep-state {
-				pins = "gpio85", "gpio86", "gpio87", "gpio88";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			blsp2_i2c6_default: blsp2-i2c6-state {
-				pins = "gpio87", "gpio88";
-				function = "blsp_i2c12";
-				drive-strength = <16>;
-				bias-disable;
-			};
-
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
-				pins = "gpio87", "gpio88";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
-			};
-
-			pcie1_state_on: pcie1-on-state {
-				perst-pins {
-					pins = "gpio130";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-
-				clkreq-pins {
-					pins = "gpio131";
-					function = "pci_e1";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				wake-pins {
-					pins = "gpio132";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-			};
-
-			pcie1_state_off: pcie1-off-state {
-				/* Perst is missing? */
-				clkreq-pins {
-					pins = "gpio131";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				wake-pins {
-					pins = "gpio132";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			pcie2_state_on: pcie2-on-state {
-				perst-pins {
-					pins = "gpio114";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-
-				clkreq-pins {
-					pins = "gpio115";
-					function = "pci_e2";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-
-				wake-pins {
-					pins = "gpio116";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-				};
-			};
-
-			pcie2_state_off: pcie2-off-state {
-				/* Perst is missing? */
-				clkreq-pins {
-					pins = "gpio115";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				wake-pins {
-					pins = "gpio116";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-disable;
-				};
-			};
-
-			sdc1_state_on: sdc1-on-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				cmd-pins {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				data-pins {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				rclk-pins {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc1_state_off: sdc1-off-state {
-				clk-pins {
-					pins = "sdc1_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd-pins {
-					pins = "sdc1_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data-pins {
-					pins = "sdc1_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				rclk-pins {
-					pins = "sdc1_rclk";
-					bias-pull-down;
-				};
-			};
-
-			sdc2_state_on: sdc2-on-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <16>;
-				};
-
-				cmd-pins {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-
-				data-pins {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <10>;
-				};
-			};
-
-			sdc2_state_off: sdc2-off-state {
-				clk-pins {
-					pins = "sdc2_clk";
-					bias-disable;
-					drive-strength = <2>;
-				};
-
-				cmd-pins {
-					pins = "sdc2_cmd";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				data-pins {
-					pins = "sdc2_data";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-			};
-		};
-
-		sram at 290000 {
-			compatible = "qcom,rpm-stats";
-			reg = <0x00290000 0x10000>;
-		};
-
-		spmi_bus: spmi at 400f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0400f000 0x1000>,
-			      <0x04400000 0x800000>,
-			      <0x04c00000 0x800000>,
-			      <0x05800000 0x200000>,
-			      <0x0400a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		bus at 0 {
-			power-domains = <&gcc AGGRE0_NOC_GDSC>;
-			compatible = "simple-pm-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x0 0x0 0xffffffff>;
-
-			pcie0: pcie at 600000 {
-				compatible = "qcom,pcie-msm8996";
-				status = "disabled";
-				power-domains = <&gcc PCIE0_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				reg = <0x00600000 0x2000>,
-				      <0x0c000000 0xf1d>,
-				      <0x0c000f20 0xa8>,
-				      <0x0c100000 0x100000>;
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_0>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
-					 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
-				device_type = "pci";
-
-				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie0_state_on>;
-				pinctrl-1 = <&pcie0_state_off>;
-
-				linux,pci-domain = <0>;
-
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-					<&gcc GCC_PCIE_0_AUX_CLK>,
-					<&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
-				clock-names = "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-
-			pcie1: pcie at 608000 {
-				compatible = "qcom,pcie-msm8996";
-				power-domains = <&gcc PCIE1_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-
-				status = "disabled";
-
-				reg = <0x00608000 0x2000>,
-				      <0x0d000000 0xf1d>,
-				      <0x0d000f20 0xa8>,
-				      <0x0d100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_1>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
-					 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
-				device_type = "pci";
-
-				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie1_state_on>;
-				pinctrl-1 = <&pcie1_state_off>;
-
-				linux,pci-domain = <1>;
-
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
-					<&gcc GCC_PCIE_1_AUX_CLK>,
-					<&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
-				clock-names = "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-
-			pcie2: pcie at 610000 {
-				compatible = "qcom,pcie-msm8996";
-				power-domains = <&gcc PCIE2_GDSC>;
-				bus-range = <0x00 0xff>;
-				num-lanes = <1>;
-				status = "disabled";
-				reg = <0x00610000 0x2000>,
-				      <0x0e000000 0xf1d>,
-				      <0x0e000f20 0xa8>,
-				      <0x0e100000 0x100000>;
-
-				reg-names = "parf", "dbi", "elbi","config";
-
-				phys = <&pciephy_2>;
-				phy-names = "pciephy";
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
-					 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
-
-				device_type = "pci";
-
-				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "msi";
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-				pinctrl-names = "default", "sleep";
-				pinctrl-0 = <&pcie2_state_on>;
-				pinctrl-1 = <&pcie2_state_off>;
-
-				linux,pci-domain = <2>;
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
-					<&gcc GCC_PCIE_2_AUX_CLK>,
-					<&gcc GCC_PCIE_2_CFG_AHB_CLK>,
-					<&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
-					<&gcc GCC_PCIE_2_SLV_AXI_CLK>;
-
-				clock-names = "pipe",
-						"aux",
-						"cfg",
-						"bus_master",
-						"bus_slave";
-			};
-		};
-
-		ufshc: ufshc at 624000 {
-			compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
-				     "jedec,ufs-2.0";
-			reg = <0x00624000 0x2500>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
-			phys = <&ufsphy_lane>;
-			phy-names = "ufsphy";
-
-			power-domains = <&gcc UFS_GDSC>;
-
-			clock-names =
-				"core_clk_src",
-				"core_clk",
-				"bus_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro_src",
-				"core_clk_unipro",
-				"core_clk_ice",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk";
-			clocks =
-				<&gcc UFS_AXI_CLK_SRC>,
-				<&gcc GCC_UFS_AXI_CLK>,
-				<&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
-				<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-				<&gcc GCC_UFS_AHB_CLK>,
-				<&gcc UFS_ICE_CORE_CLK_SRC>,
-				<&gcc GCC_UFS_UNIPRO_CORE_CLK>,
-				<&gcc GCC_UFS_ICE_CORE_CLK>,
-				<&rpmcc RPM_SMD_LN_BB_CLK>,
-				<&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
-			freq-table-hz =
-				<100000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<150000000 300000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>;
-
-			interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
-					<&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
-			interconnect-names = "ufs-ddr", "cpu-ufs";
-
-			lanes-per-direction = <1>;
-			#reset-cells = <1>;
-			status = "disabled";
-		};
-
-		ufsphy: phy at 627000 {
-			compatible = "qcom,msm8996-qmp-ufs-phy";
-			reg = <0x00627000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
-			clock-names = "ref";
-
-			resets = <&ufshc 0>;
-			reset-names = "ufsphy";
-			status = "disabled";
-
-			ufsphy_lane: phy at 627400 {
-				reg = <0x627400 0x12c>,
-				      <0x627600 0x200>,
-				      <0x627c00 0x1b4>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
-		};
-
-		camss: camss at a34000 {
-			compatible = "qcom,msm8996-camss";
-			reg = <0x00a34000 0x1000>,
-			      <0x00a00030 0x4>,
-			      <0x00a35000 0x1000>,
-			      <0x00a00038 0x4>,
-			      <0x00a36000 0x1000>,
-			      <0x00a00040 0x4>,
-			      <0x00a30000 0x100>,
-			      <0x00a30400 0x100>,
-			      <0x00a30800 0x100>,
-			      <0x00a30c00 0x100>,
-			      <0x00a31000 0x500>,
-			      <0x00a00020 0x10>,
-			      <0x00a10000 0x1000>,
-			      <0x00a14000 0x1000>;
-			reg-names = "csiphy0",
-				"csiphy0_clk_mux",
-				"csiphy1",
-				"csiphy1_clk_mux",
-				"csiphy2",
-				"csiphy2_clk_mux",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"csi_clk_mux",
-				"vfe0",
-				"vfe1";
-			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
-				<GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "csiphy0",
-				"csiphy1",
-				"csiphy2",
-				"csid0",
-				"csid1",
-				"csid2",
-				"csid3",
-				"ispif",
-				"vfe0",
-				"vfe1";
-			power-domains = <&mmcc VFE0_GDSC>,
-					<&mmcc VFE1_GDSC>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				<&mmcc CAMSS_ISPIF_AHB_CLK>,
-				<&mmcc CAMSS_CSI0PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI1PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI2PHYTIMER_CLK>,
-				<&mmcc CAMSS_CSI0_AHB_CLK>,
-				<&mmcc CAMSS_CSI0_CLK>,
-				<&mmcc CAMSS_CSI0PHY_CLK>,
-				<&mmcc CAMSS_CSI0PIX_CLK>,
-				<&mmcc CAMSS_CSI0RDI_CLK>,
-				<&mmcc CAMSS_CSI1_AHB_CLK>,
-				<&mmcc CAMSS_CSI1_CLK>,
-				<&mmcc CAMSS_CSI1PHY_CLK>,
-				<&mmcc CAMSS_CSI1PIX_CLK>,
-				<&mmcc CAMSS_CSI1RDI_CLK>,
-				<&mmcc CAMSS_CSI2_AHB_CLK>,
-				<&mmcc CAMSS_CSI2_CLK>,
-				<&mmcc CAMSS_CSI2PHY_CLK>,
-				<&mmcc CAMSS_CSI2PIX_CLK>,
-				<&mmcc CAMSS_CSI2RDI_CLK>,
-				<&mmcc CAMSS_CSI3_AHB_CLK>,
-				<&mmcc CAMSS_CSI3_CLK>,
-				<&mmcc CAMSS_CSI3PHY_CLK>,
-				<&mmcc CAMSS_CSI3PIX_CLK>,
-				<&mmcc CAMSS_CSI3RDI_CLK>,
-				<&mmcc CAMSS_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_CLK>,
-				<&mmcc CAMSS_CSI_VFE0_CLK>,
-				<&mmcc CAMSS_VFE0_AHB_CLK>,
-				<&mmcc CAMSS_VFE0_STREAM_CLK>,
-				<&mmcc CAMSS_VFE1_CLK>,
-				<&mmcc CAMSS_CSI_VFE1_CLK>,
-				<&mmcc CAMSS_VFE1_AHB_CLK>,
-				<&mmcc CAMSS_VFE1_STREAM_CLK>,
-				<&mmcc CAMSS_VFE_AHB_CLK>,
-				<&mmcc CAMSS_VFE_AXI_CLK>;
-			clock-names = "top_ahb",
-				"ispif_ahb",
-				"csiphy0_timer",
-				"csiphy1_timer",
-				"csiphy2_timer",
-				"csi0_ahb",
-				"csi0",
-				"csi0_phy",
-				"csi0_pix",
-				"csi0_rdi",
-				"csi1_ahb",
-				"csi1",
-				"csi1_phy",
-				"csi1_pix",
-				"csi1_rdi",
-				"csi2_ahb",
-				"csi2",
-				"csi2_phy",
-				"csi2_pix",
-				"csi2_rdi",
-				"csi3_ahb",
-				"csi3",
-				"csi3_phy",
-				"csi3_pix",
-				"csi3_rdi",
-				"ahb",
-				"vfe0",
-				"csi_vfe0",
-				"vfe0_ahb",
-				"vfe0_stream",
-				"vfe1",
-				"csi_vfe1",
-				"vfe1_ahb",
-				"vfe1_stream",
-				"vfe_ahb",
-				"vfe_axi";
-			iommus = <&vfe_smmu 0>,
-				 <&vfe_smmu 1>,
-				 <&vfe_smmu 2>,
-				 <&vfe_smmu 3>;
-			status = "disabled";
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		cci: cci at a0c000 {
-			compatible = "qcom,msm8996-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0xa0c000 0x1000>;
-			interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
-			power-domains = <&mmcc CAMSS_GDSC>;
-			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_AHB_CLK>,
-				 <&mmcc CAMSS_CCI_CLK>,
-				 <&mmcc CAMSS_AHB_CLK>;
-			clock-names = "camss_top_ahb",
-				      "cci_ahb",
-				      "cci",
-				      "camss_ahb";
-			assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
-					  <&mmcc CAMSS_CCI_CLK>;
-			assigned-clock-rates = <80000000>, <37500000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&cci0_default &cci1_default>;
-			status = "disabled";
-
-			cci_i2c0: i2c-bus at 0 {
-				reg = <0>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cci_i2c1: i2c-bus at 1 {
-				reg = <1>;
-				clock-frequency = <400000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		adreno_smmu: iommu at b40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0x00b40000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-
-			clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
-				 <&mmcc GPU_AHB_CLK>;
-			clock-names = "bus", "iface";
-
-			power-domains = <&mmcc GPU_GDSC>;
-		};
-
-		venus: video-codec at c00000 {
-			compatible = "qcom,msm8996-venus";
-			reg = <0x00c00000 0xff000>;
-			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc VENUS_GDSC>;
-			clocks = <&mmcc VIDEO_CORE_CLK>,
-				 <&mmcc VIDEO_AHB_CLK>,
-				 <&mmcc VIDEO_AXI_CLK>,
-				 <&mmcc VIDEO_MAXI_CLK>;
-			clock-names = "core", "iface", "bus", "mbus";
-			interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
-					<&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
-			interconnect-names = "video-mem", "cpu-cfg";
-			iommus = <&venus_smmu 0x00>,
-				 <&venus_smmu 0x01>,
-				 <&venus_smmu 0x0a>,
-				 <&venus_smmu 0x07>,
-				 <&venus_smmu 0x0e>,
-				 <&venus_smmu 0x0f>,
-				 <&venus_smmu 0x08>,
-				 <&venus_smmu 0x09>,
-				 <&venus_smmu 0x0b>,
-				 <&venus_smmu 0x0c>,
-				 <&venus_smmu 0x0d>,
-				 <&venus_smmu 0x10>,
-				 <&venus_smmu 0x11>,
-				 <&venus_smmu 0x21>,
-				 <&venus_smmu 0x28>,
-				 <&venus_smmu 0x29>,
-				 <&venus_smmu 0x2b>,
-				 <&venus_smmu 0x2c>,
-				 <&venus_smmu 0x2d>,
-				 <&venus_smmu 0x31>;
-			memory-region = <&venus_mem>;
-			status = "disabled";
-
-			video-decoder {
-				compatible = "venus-decoder";
-				clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE0_GDSC>;
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-				clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-				clock-names = "core";
-				power-domains = <&mmcc VENUS_CORE1_GDSC>;
-			};
-		};
-
-		mdp_smmu: iommu at d00000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x00d00000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
-			#iommu-cells = <1>;
-			clocks = <&mmcc SMMU_MDP_AXI_CLK>,
-				 <&mmcc SMMU_MDP_AHB_CLK>;
-			clock-names = "bus", "iface";
-
-			power-domains = <&mmcc MDSS_GDSC>;
-		};
-
-		venus_smmu: iommu at d40000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x00d40000 0x20000>;
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
-			clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
-				 <&mmcc SMMU_VIDEO_AHB_CLK>;
-			clock-names = "bus", "iface";
-			#iommu-cells = <1>;
-			status = "okay";
-		};
-
-		vfe_smmu: iommu at da0000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x00da0000 0x10000>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
-			clocks = <&mmcc SMMU_VFE_AXI_CLK>,
-				 <&mmcc SMMU_VFE_AHB_CLK>;
-			clock-names = "bus", "iface";
-			#iommu-cells = <1>;
-		};
-
-		lpass_q6_smmu: iommu at 1600000 {
-			compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
-			reg = <0x01600000 0x20000>;
-			#iommu-cells = <1>;
-			power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
-
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-		                <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
-				 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
-			clock-names = "bus", "iface";
-		};
-
-		slpi_pil: remoteproc at 1c00000 {
-			compatible = "qcom,msm8996-slpi-pil";
-			reg = <0x01c00000 0x4000>;
-
-			interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
-					      <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog",
-					  "fatal",
-					  "ready",
-					  "handover",
-					  "stop-ack";
-
-			clocks = <&xo_board>,
-				 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
-			clock-names = "xo", "aggre2";
-
-			memory-region = <&slpi_mem>;
-
-			qcom,smem-states = <&slpi_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			power-domains = <&rpmpd MSM8996_VDDSSCX>;
-			power-domain-names = "ssc_cx";
-
-			status = "disabled";
-
-			smd-edge {
-				interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
-
-				label = "dsps";
-				mboxes = <&apcs_glb 25>;
-				qcom,smd-edge = <3>;
-				qcom,remote-pid = <3>;
-			};
-		};
-
-		mss_pil: remoteproc at 2080000 {
-			compatible = "qcom,msm8996-mss-pil";
-			reg = <0x2080000 0x100>,
-			      <0x2180000 0x020>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
-					      <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack",
-					  "shutdown-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&xo_board>,
-				 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_QDSS_CLK>;
-			clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "pnoc", "qdss";
-
-			resets = <&gcc GCC_MSS_RESTART>;
-			reset-names = "mss_restart";
-
-			power-domains = <&rpmpd MSM8996_VDDCX>,
-					<&rpmpd MSM8996_VDDMX>;
-			power-domain-names = "cx", "mx";
-
-			qcom,smem-states = <&mpss_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
-
-			status = "disabled";
-
-			mba {
-				memory-region = <&mba_mem>;
-			};
-
-			mpss {
-				memory-region = <&mpss_mem>;
-			};
-
-			metadata {
-				memory-region = <&mdata_mem>;
-			};
-
-			smd-edge {
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-
-				label = "mpss";
-				mboxes = <&apcs_glb 12>;
-				qcom,smd-edge = <0>;
-				qcom,remote-pid = <1>;
-			};
-		};
-
-		stm at 3002000 {
-			compatible = "arm,coresight-stm", "arm,primecell";
-			reg = <0x3002000 0x1000>,
-			      <0x8280000 0x180000>;
-			reg-names = "stm-base", "stm-stimulus-base";
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			out-ports {
-				port {
-					stm_out: endpoint {
-						remote-endpoint =
-						  <&funnel0_in>;
-					};
-				};
-			};
-		};
-
-		tpiu at 3020000 {
-			compatible = "arm,coresight-tpiu", "arm,primecell";
-			reg = <0x3020000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					tpiu_in: endpoint {
-						remote-endpoint =
-						  <&replicator_out1>;
-					};
-				};
-			};
-		};
-
-		funnel at 3021000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3021000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 7 {
-					reg = <7>;
-					funnel0_in: endpoint {
-						remote-endpoint =
-						  <&stm_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel0_out: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_in0>;
-					};
-				};
-			};
-		};
-
-		funnel at 3022000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3022000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 6 {
-					reg = <6>;
-					funnel1_in: endpoint {
-						remote-endpoint =
-						  <&apss_merge_funnel_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					funnel1_out: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_in1>;
-					};
-				};
-			};
-		};
-
-		funnel at 3023000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3023000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-
-			out-ports {
-				port {
-					funnel2_out: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_in2>;
-					};
-				};
-			};
-		};
-
-		funnel at 3025000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3025000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					merge_funnel_in0: endpoint {
-						remote-endpoint =
-						  <&funnel0_out>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					merge_funnel_in1: endpoint {
-						remote-endpoint =
-						  <&funnel1_out>;
-					};
-				};
-
-				port at 2 {
-					reg = <2>;
-					merge_funnel_in2: endpoint {
-						remote-endpoint =
-						  <&funnel2_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					merge_funnel_out: endpoint {
-						remote-endpoint =
-						  <&etf_in>;
-					};
-				};
-			};
-		};
-
-		replicator at 3026000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0x3026000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint =
-						  <&etf_out>;
-					};
-				};
-			};
-
-			out-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					replicator_out0: endpoint {
-						remote-endpoint =
-						  <&etr_in>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					replicator_out1: endpoint {
-						remote-endpoint =
-						  <&tpiu_in>;
-					};
-				};
-			};
-		};
-
-		etf at 3027000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x3027000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				port {
-					etf_in: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					etf_out: endpoint {
-						remote-endpoint =
-						  <&replicator_in>;
-					};
-				};
-			};
-		};
-
-		etr at 3028000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x3028000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-			arm,scatter-gather;
-
-			in-ports {
-				port {
-					etr_in: endpoint {
-						remote-endpoint =
-						  <&replicator_out0>;
-					};
-				};
-			};
-		};
-
-		debug at 3810000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x3810000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU0>;
-		};
-
-		etm at 3840000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x3840000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU0>;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel0_in0>;
-					};
-				};
-			};
-		};
-
-		debug at 3910000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x3910000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU1>;
-		};
-
-		etm at 3940000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x3940000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU1>;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel0_in1>;
-					};
-				};
-			};
-		};
-
-		funnel at 39b0000 { /* APSS Funnel 0 */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x39b0000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					apss_funnel0_in0: endpoint {
-						remote-endpoint = <&etm0_out>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					apss_funnel0_in1: endpoint {
-						remote-endpoint = <&etm1_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					apss_funnel0_out: endpoint {
-						remote-endpoint =
-						  <&apss_merge_funnel_in0>;
-					};
-				};
-			};
-		};
-
-		debug at 3a10000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x3a10000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU2>;
-		};
-
-		etm at 3a40000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x3a40000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU2>;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel1_in0>;
-					};
-				};
-			};
-		};
-
-		debug at 3b10000 {
-			compatible = "arm,coresight-cpu-debug", "arm,primecell";
-			reg = <0x3b10000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>;
-			clock-names = "apb_pclk";
-
-			cpu = <&CPU3>;
-		};
-
-		etm at 3b40000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x3b40000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			cpu = <&CPU3>;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel1_in1>;
-					};
-				};
-			};
-		};
-
-		funnel at 3bb0000 { /* APSS Funnel 1 */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3bb0000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					apss_funnel1_in0: endpoint {
-						remote-endpoint = <&etm2_out>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					apss_funnel1_in1: endpoint {
-						remote-endpoint = <&etm3_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					apss_funnel1_out: endpoint {
-						remote-endpoint =
-						  <&apss_merge_funnel_in1>;
-					};
-				};
-			};
-		};
-
-		funnel at 3bc0000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x3bc0000 0x1000>;
-
-			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
-			clock-names = "apb_pclk", "atclk";
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					apss_merge_funnel_in0: endpoint {
-						remote-endpoint =
-						  <&apss_funnel0_out>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					apss_merge_funnel_in1: endpoint {
-						remote-endpoint =
-						  <&apss_funnel1_out>;
-					};
-				};
-			};
-
-			out-ports {
-				port {
-					apss_merge_funnel_out: endpoint {
-						remote-endpoint =
-						  <&funnel1_in>;
-					};
-				};
-			};
-		};
-
-		kryocc: clock-controller at 6400000 {
-			compatible = "qcom,msm8996-apcc";
-			reg = <0x06400000 0x90000>;
-
-			clock-names = "xo", "sys_apcs_aux";
-			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
-
-			#clock-cells = <1>;
-		};
-
-		usb3: usb at 6af8800 {
-			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x06af8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq";
-
-			clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
-				 <&gcc GCC_USB30_MASTER_CLK>,
-				 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <120000000>;
-
-			interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
-					<&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			power-domains = <&gcc USB30_GDSC>;
-			status = "disabled";
-
-			usb3_dwc3: usb at 6a00000 {
-				compatible = "snps,dwc3";
-				reg = <0x06a00000 0xcc00>;
-				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,hird-threshold = /bits/ 8 <0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,is-utmi-l1-suspend;
-				tx-fifo-resize;
-			};
-		};
-
-		usb3phy: phy at 7410000 {
-			compatible = "qcom,msm8996-qmp-usb3-phy";
-			reg = <0x07410000 0x1c4>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_USB3_PHY_BCR>,
-				<&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
-			status = "disabled";
-
-			ssusb_phy_0: phy at 7410200 {
-				reg = <0x07410200 0x200>,
-				      <0x07410400 0x130>,
-				      <0x07410600 0x1a8>;
-				#phy-cells = <0>;
-
-				#clock-cells = <0>;
-				clock-output-names = "usb3_phy_pipe_clk_src";
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-			};
-		};
-
-		hsusb_phy1: phy at 7411000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x07411000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX1_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-			nvmem-cells = <&qusb2p_hstx_trim>;
-			status = "disabled";
-		};
-
-		hsusb_phy2: phy at 7412000 {
-			compatible = "qcom,msm8996-qusb2-phy";
-			reg = <0x07412000 0x180>;
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				<&gcc GCC_RX2_USB2_CLKREF_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
-			nvmem-cells = <&qusb2s_hstx_trim>;
-			status = "disabled";
-		};
-
-		sdhc1: mmc at 7464900 {
-			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0x07464900 0x11c>, <0x07464000 0x800>;
-			reg-names = "hc", "core";
-
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-
-			clock-names = "iface", "core", "xo";
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&rpmcc RPM_SMD_XO_CLK_SRC>;
-			resets = <&gcc GCC_SDCC1_BCR>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_state_on>;
-			pinctrl-1 = <&sdc1_state_off>;
-
-			bus-width = <8>;
-			non-removable;
-			status = "disabled";
-		};
-
-		sdhc2: mmc at 74a4900 {
-			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
-			reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
-			reg-names = "hc", "core";
-
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				      <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-
-			clock-names = "iface", "core", "xo";
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&rpmcc RPM_SMD_XO_CLK_SRC>;
-			resets = <&gcc GCC_SDCC2_BCR>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_state_on>;
-			pinctrl-1 = <&sdc2_state_off>;
-
-			bus-width = <4>;
-			status = "disabled";
-		 };
-
-		blsp1_dma: dma-controller at 7544000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07544000 0x2b000>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "bam_clk";
-			qcom,controlled-remotely;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		blsp1_uart2: serial at 7570000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x07570000 0x1000>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		blsp1_spi1: spi at 7575000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x07575000 0x600>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_spi1_default>;
-			pinctrl-1 = <&blsp1_spi1_sleep>;
-			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c3: i2c at 7577000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x07577000 0x1000>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c3_default>;
-			pinctrl-1 = <&blsp1_i2c3_sleep>;
-			dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c6: i2c at 757a000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x757a000 0x1000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_i2c6_default>;
-			pinctrl-1 = <&blsp1_i2c6_sleep>;
-			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_dma: dma-controller at 7584000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07584000 0x2b000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			qcom,controlled-remotely;
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		blsp2_uart2: serial at 75b0000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x075b0000 0x1000>;
-			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp2_uart3: serial at 75b1000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x075b1000 0x1000>;
-			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			status = "disabled";
-		};
-
-		blsp2_i2c1: i2c at 75b5000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b5000 0x1000>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c1_default>;
-			pinctrl-1 = <&blsp2_i2c1_sleep>;
-			dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_i2c2: i2c at 75b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b6000 0x1000>;
-			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c2_default>;
-			pinctrl-1 = <&blsp2_i2c2_sleep>;
-			dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_i2c3: i2c at 75b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x075b7000 0x1000>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			clock-frequency = <400000>;
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c3_default>;
-			pinctrl-1 = <&blsp2_i2c3_sleep>;
-			dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_i2c5: i2c at 75b9000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x75b9000 0x1000>;
-			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_i2c5_default>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_i2c6: i2c at 75ba000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x75ba000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_i2c6_default>;
-			pinctrl-1 = <&blsp2_i2c6_sleep>;
-			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_spi6: spi at 75ba000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x075ba000 0x600>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_spi6_default>;
-			pinctrl-1 = <&blsp2_spi6_sleep>;
-			dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb2: usb at 76f8800 {
-			compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
-			reg = <0x076f8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq";
-
-			clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
-				<&gcc GCC_USB20_MASTER_CLK>,
-				<&gcc GCC_USB20_MOCK_UTMI_CLK>,
-				<&gcc GCC_USB20_SLEEP_CLK>,
-				<&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB20_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <60000000>;
-
-			power-domains = <&gcc USB30_GDSC>;
-			qcom,select-utmi-as-pipe-clk;
-			status = "disabled";
-
-			usb2_dwc3: usb at 7600000 {
-				compatible = "snps,dwc3";
-				reg = <0x07600000 0xcc00>;
-				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hsusb_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-			};
-		};
-
-		slimbam: dma-controller at 9184000 {
-			compatible = "qcom,bam-v1.7.0";
-			qcom,controlled-remotely;
-			reg = <0x09184000 0x32000>;
-			num-channels = <31>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <1>;
-			qcom,num-ees = <2>;
-		};
-
-		slim_msm: slim-ngd at 91c0000 {
-			compatible = "qcom,slim-ngd-v1.5.0";
-			reg = <0x091c0000 0x2c000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&slimbam 3>, <&slimbam 4>;
-			dma-names = "rx", "tx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			status = "disabled";
-		};
-
-		adsp_pil: remoteproc at 9300000 {
-			compatible = "qcom,msm8996-adsp-pil";
-			reg = <0x09300000 0x80000>;
-
-			interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_mem>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			power-domains = <&rpmpd MSM8996_VDDCX>;
-			power-domain-names = "cx";
-
-			status = "disabled";
-
-			smd-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-				label = "lpass";
-				mboxes = <&apcs_glb 8>;
-				qcom,smd-edge = <1>;
-				qcom,remote-pid = <2>;
-
-				apr {
-					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
-					compatible = "qcom,apr-v2";
-					qcom,smd-channels = "apr_audio_svc";
-					qcom,domain = <APR_DOMAIN_ADSP>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					service at 3 {
-						reg = <APR_SVC_ADSP_CORE>;
-						compatible = "qcom,q6core";
-					};
-
-					q6afe: service at 4 {
-						compatible = "qcom,q6afe";
-						reg = <APR_SVC_AFE>;
-						q6afedai: dais {
-							compatible = "qcom,q6afe-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							dai at 1 {
-								reg = <1>;
-							};
-						};
-					};
-
-					q6asm: service at 7 {
-						compatible = "qcom,q6asm";
-						reg = <APR_SVC_ASM>;
-						q6asmdai: dais {
-							compatible = "qcom,q6asm-dais";
-							#address-cells = <1>;
-							#size-cells = <0>;
-							#sound-dai-cells = <1>;
-							iommus = <&lpass_q6_smmu 1>;
-						};
-					};
-
-					q6adm: service at 8 {
-						compatible = "qcom,q6adm";
-						reg = <APR_SVC_ADM>;
-						q6routing: routing {
-							compatible = "qcom,q6adm-routing";
-							#sound-dai-cells = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apcs_glb: mailbox at 9820000 {
-			compatible = "qcom,msm8996-apcs-hmss-global";
-			reg = <0x09820000 0x1000>;
-
-			#mbox-cells = <1>;
-			#clock-cells = <0>;
-		};
-
-		timer at 9840000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x09840000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame at 9850000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09850000 0x1000>,
-				      <0x09860000 0x1000>;
-			};
-
-			frame at 9870000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09870000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 9880000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09880000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 9890000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x09890000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 98a0000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098a0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 98b0000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098b0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 98c0000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x098c0000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		saw3: syscon at 9a10000 {
-			compatible = "syscon";
-			reg = <0x09a10000 0x1000>;
-		};
-
-		cbf: clock-controller at 9a11000 {
-			compatible = "qcom,msm8996-cbf";
-			reg = <0x09a11000 0x10000>;
-			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
-			#clock-cells = <0>;
-			#interconnect-cells = <1>;
-		};
-
-		intc: interrupt-controller at 9bc0000 {
-			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			#redistributor-regions = <1>;
-			redistributor-stride = <0x0 0x40000>;
-			reg = <0x09bc0000 0x10000>,
-			      <0x09c00000 0x100000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	sound: sound {
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 3>;
-
-			trips {
-				cpu0_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu0_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 5>;
-
-			trips {
-				cpu1_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu1_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 8>;
-
-			trips {
-				cpu2_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu2_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 10>;
-
-			trips {
-				cpu3_alert0: trip-point0 {
-					temperature = <75000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu3_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		gpu-top-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 6>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu1_alert0>;
-					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		gpu-bottom-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 7>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&gpu2_alert0>;
-					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		m4m-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 1>;
-
-			trips {
-				m4m_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		l3-or-venus-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 2>;
-
-			trips {
-				l3_or_venus_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		cluster0-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 7>;
-
-			trips {
-				cluster0_l2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		cluster1-l2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 12>;
-
-			trips {
-				cluster1_l2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 1>;
-
-			trips {
-				camera_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		q6-dsp-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 2>;
-
-			trips {
-				q6_dsp_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 3>;
-
-			trips {
-				mem_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		modemtx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 4>;
-
-			trips {
-				modemtx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-	};
-};
diff --git a/arch/arm/dts/pm8916.dtsi b/arch/arm/dts/pm8916.dtsi
deleted file mode 100644
index f4de86787743..000000000000
--- a/arch/arm/dts/pm8916.dtsi
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pm8916_0: pmic at 0 {
-		compatible = "qcom,pm8916", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pon at 800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
-
-			pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-
-			pm8916_resin: resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				status = "disabled";
-			};
-
-			watchdog {
-				compatible = "qcom,pm8916-wdt";
-				interrupts = <0x0 0x8 6 IRQ_TYPE_EDGE_RISING>;
-				timeout-sec = <60>;
-			};
-		};
-
-		pm8916_usbin: usb-detect at 1300 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x1300>;
-			interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_vbus";
-			status = "disabled";
-		};
-
-		pm8916_temp: temp-alarm at 2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pm8916_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pm8916_vadc: adc at 3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			channel at 0 {
-				reg = <VADC_USBIN>;
-				qcom,pre-scaling = <1 10>;
-			};
-			channel at 7 {
-				reg = <VADC_VSYS>;
-				qcom,pre-scaling = <1 3>;
-			};
-			channel at 8 {
-				reg = <VADC_DIE_TEMP>;
-			};
-			channel at 9 {
-				reg = <VADC_REF_625MV>;
-			};
-			channel at a {
-				reg = <VADC_REF_1250MV>;
-			};
-			channel at e {
-				reg = <VADC_GND_REF>;
-			};
-			channel at f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-
-		rtc at 6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8916_mpps: mpps at a000 {
-			compatible = "qcom,pm8916-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8916_mpps 0 0 4>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8916_gpios: gpio at c000 {
-			compatible = "qcom,pm8916-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8916_gpios 0 0 4>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pm8916_1: pmic at 1 {
-		compatible = "qcom,pm8916", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8916_pwm: pwm {
-			compatible = "qcom,pm8916-pwm";
-
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pm8916_vib: vibrator at c000 {
-			compatible = "qcom,pm8916-vib";
-			reg = <0xc000>;
-			status = "disabled";
-		};
-
-		pm8916_codec: audio-codec at f000 {
-			compatible = "qcom,pm8916-wcd-analog-codec";
-			reg = <0xf000>;
-			interrupt-parent = <&spmi_bus>;
-			interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
-				     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
-				     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
-			interrupt-names = "cdc_spk_cnp_int",
-					  "cdc_spk_clip_int",
-					  "cdc_spk_ocp_int",
-					  "mbhc_ins_rem_det1",
-					  "mbhc_but_rel_det",
-					  "mbhc_but_press_det",
-					  "mbhc_ins_rem_det",
-					  "mbhc_switch_int",
-					  "cdc_ear_ocp_int",
-					  "cdc_hphr_ocp_int",
-					  "cdc_hphl_ocp_det",
-					  "cdc_ear_cnp_int",
-					  "cdc_hphr_cnp_int",
-					  "cdc_hphl_cnp_int";
-			#sound-dai-cells = <1>;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/dts/pm8994.dtsi b/arch/arm/dts/pm8994.dtsi
deleted file mode 100644
index d44a95caf04a..000000000000
--- a/arch/arm/dts/pm8994.dtsi
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-/ {
-	thermal-zones {
-		pm8994-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8994_temp>;
-
-			trips {
-				pm8994_alert0: pm8994-alert0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				pm8994_crit: pm8994-crit {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-};
-
-&spmi_bus {
-
-	pmic at 0 {
-		compatible = "qcom,pm8994", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		rtc at 6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8994_pon: pon at 800 {
-			compatible = "qcom,pm8916-pon";
-			reg = <0x800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
-
-			pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-
-			pm8994_resin: resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				status = "disabled";
-			};
-		};
-
-		pm8994_temp: temp-alarm at 2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pm8994_vadc VADC_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pm8994_vadc: adc at 3100 {
-			compatible = "qcom,spmi-vadc";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			channel at 7 {
-				reg = <VADC_VSYS>;
-				qcom,pre-scaling = <1 3>;
-				label = "vph_pwr";
-			};
-			channel at 8 {
-				reg = <VADC_DIE_TEMP>;
-				label = "die_temp";
-			};
-			channel at 9 {
-				reg = <VADC_REF_625MV>;
-				label = "ref_625mv";
-			};
-			channel at a {
-				reg = <VADC_REF_1250MV>;
-				label = "ref_1250mv";
-			};
-			channel at e {
-				reg = <VADC_GND_REF>;
-			};
-			channel at f {
-				reg = <VADC_VDD_VADC>;
-			};
-		};
-
-		pm8994_gpios: gpio at c000 {
-			compatible = "qcom,pm8994-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8994_gpios 0 0 22>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pm8994_mpps: mpps at a000 {
-			compatible = "qcom,pm8994-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio-ranges = <&pm8994_mpps 0 0 8>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pmic at 1 {
-		compatible = "qcom,pm8994", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8994_lpg: pwm {
-			compatible = "qcom,pm8994-lpg";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pm8994_spmi_regulators: regulators {
-			compatible = "qcom,pm8994-regulators";
-		};
-	};
-};
diff --git a/arch/arm/dts/pm8998.dtsi b/arch/arm/dts/pm8998.dtsi
deleted file mode 100644
index 3f82715392c6..000000000000
--- a/arch/arm/dts/pm8998.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/* Copyright 2018 Google LLC. */
-
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	thermal-zones {
-		pm8998-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8998_temp>;
-
-			trips {
-				pm8998_alert0: pm8998-alert0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				pm8998_crit: pm8998-crit {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pm8998_lsid0: pmic at 0 {
-		compatible = "qcom,pm8998", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pm8998_pon: pon at 800 {
-			compatible = "qcom,pm8998-pon";
-
-			reg = <0x800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
-
-			pm8998_pwrkey: pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-
-			pm8998_resin: resin {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				status = "disabled";
-			};
-		};
-
-		pm8998_temp: temp-alarm at 2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pm8998_coincell: charger at 2800 {
-			compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
-			reg = <0x2800>;
-
-			status = "disabled";
-		};
-
-		pm8998_adc: adc at 3100 {
-			compatible = "qcom,spmi-adc-rev2";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			channel at 6 {
-				reg = <ADC5_DIE_TEMP>;
-				label = "die_temp";
-			};
-		};
-
-		pm8998_adc_tm: adc-tm at 3400 {
-			compatible = "qcom,spmi-adc-tm-hc";
-			reg = <0x3400>;
-			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
-			#thermal-sensor-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		rtc at 6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
-		pm8998_gpios: gpio at c000 {
-			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pm8998_gpios 0 0 26>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-	};
-
-	pm8998_lsid1: pmic at 1 {
-		compatible = "qcom,pm8998", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-};
diff --git a/arch/arm/dts/pmi8994.dtsi b/arch/arm/dts/pmi8994.dtsi
deleted file mode 100644
index 36d6a1fb553a..000000000000
--- a/arch/arm/dts/pmi8994.dtsi
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-
-	pmic at 2 {
-		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
-		reg = <0x2 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmi8994_gpios: gpio at c000 {
-			compatible = "qcom,pmi8994-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pmi8994_gpios 0 0 10>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pmi8994_mpps: mpps at a000 {
-			compatible = "qcom,pmi8994-mpp", "qcom,spmi-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			gpio-ranges = <&pmi8994_mpps 0 0 4>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	pmic at 3 {
-		compatible = "qcom,pmi8994", "qcom,spmi-pmic";
-		reg = <0x3 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmi8994_lpg: pwm {
-			compatible = "qcom,pmi8994-lpg";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pmi8994_spmi_regulators: regulators {
-			compatible = "qcom,pmi8994-regulators";
-		};
-
-		pmi8994_wled: wled at d800 {
-			compatible = "qcom,pmi8994-wled";
-			reg = <0xd800>, <0xd900>;
-			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
-				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp", "short";
-			qcom,cabc;
-			qcom,external-pfet;
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/dts/pmi8998.dtsi b/arch/arm/dts/pmi8998.dtsi
deleted file mode 100644
index cd3f0790fd42..000000000000
--- a/arch/arm/dts/pmi8998.dtsi
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/spmi/spmi.h>
-
-&spmi_bus {
-	pmi8998_lsid0: pmic at 2 {
-		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
-		reg = <0x2 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pmi8998_charger: charger at 1000 {
-			compatible = "qcom,pmi8998-charger";
-			reg = <0x1000>;
-
-			interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>,
-				     <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>,
-				     <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>,
-				     <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "usb-plugin",
-					  "bat-ov",
-					  "wdog-bark",
-					  "usbin-icl-change";
-
-			io-channels = <&pmi8998_rradc 3>,
-				      <&pmi8998_rradc 4>;
-			io-channel-names = "usbin_i", "usbin_v";
-
-			status = "disabled";
-		};
-
-		pmi8998_gpios: gpio at c000 {
-			compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pmi8998_gpios 0 0 14>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pmi8998_rradc: adc at 4500 {
-			compatible = "qcom,pmi8998-rradc";
-			reg = <0x4500>;
-			#io-channel-cells = <1>;
-		};
-	};
-
-	pmi8998_lsid1: pmic at 3 {
-		compatible = "qcom,pmi8998", "qcom,spmi-pmic";
-		reg = <0x3 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		labibb {
-			compatible = "qcom,pmi8998-lab-ibb";
-
-			ibb: ibb {
-				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
-					     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "sc-err", "ocp";
-			};
-
-			lab: lab {
-				interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
-					     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
-				interrupt-names = "sc-err", "ocp";
-			};
-		};
-
-		pmi8998_lpg: pwm {
-			compatible = "qcom,pmi8998-lpg";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#pwm-cells = <2>;
-
-			status = "disabled";
-		};
-
-		pmi8998_flash: led-controller at d300 {
-			compatible = "qcom,pmi8998-flash-led", "qcom,spmi-flash-led";
-			reg = <0xd300>;
-			status = "disabled";
-		};
-
-		pmi8998_wled: leds at d800 {
-			compatible = "qcom,pmi8998-wled";
-			reg = <0xd800>, <0xd900>;
-			interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>,
-				     <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ovp", "short";
-			label = "backlight";
-
-			status = "disabled";
-		};
-	};
-};
diff --git a/arch/arm/dts/pms405.dtsi b/arch/arm/dts/pms405.dtsi
deleted file mode 100644
index 461ad97032f7..000000000000
--- a/arch/arm/dts/pms405.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/spmi/spmi.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	thermal-zones {
-		pms405-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pms405_temp>;
-
-			trips {
-				pms405_alert0: pms405-alert0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				pms405_crit: pms405-crit {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-};
-
-&spmi_bus {
-	pms405_0: pms405 at 0 {
-		compatible = "qcom,pms405", "qcom,spmi-pmic";
-		reg = <0x0 SPMI_USID>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pms405_gpios: gpio at c000 {
-			compatible = "qcom,pms405-gpio", "qcom,spmi-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			gpio-ranges = <&pms405_gpios 0 0 12>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		pon at 800 {
-			compatible = "qcom,pms405-pon";
-			reg = <0x0800>;
-			mode-bootloader = <0x2>;
-			mode-recovery = <0x1>;
-
-			pwrkey {
-				compatible = "qcom,pm8941-pwrkey";
-				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-				debounce = <15625>;
-				bias-pull-up;
-				linux,code = <KEY_POWER>;
-			};
-		};
-
-		pms405_temp: temp-alarm at 2400 {
-			compatible = "qcom,spmi-temp-alarm";
-			reg = <0x2400>;
-			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-			io-channels = <&pms405_adc ADC5_DIE_TEMP>;
-			io-channel-names = "thermal";
-			#thermal-sensor-cells = <0>;
-		};
-
-		pms405_adc: adc at 3100 {
-			compatible = "qcom,pms405-adc", "qcom,spmi-adc-rev2";
-			reg = <0x3100>;
-			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#io-channel-cells = <1>;
-
-			channel at 0 {
-				reg = <ADC5_REF_GND>;
-				qcom,pre-scaling = <1 1>;
-				label = "ref_gnd";
-			};
-
-			channel at 1 {
-				reg = <ADC5_1P25VREF>;
-				qcom,pre-scaling = <1 1>;
-				label = "vref_1p25";
-			};
-
-			channel at 131 {
-				reg = <ADC5_VPH_PWR>;
-				qcom,pre-scaling = <1 3>;
-				label = "vph_pwr";
-			};
-
-			channel at 6 {
-				reg = <ADC5_DIE_TEMP>;
-				qcom,pre-scaling = <1 1>;
-				label = "die_temp";
-			};
-
-			channel at 77 {
-				reg = <ADC5_AMUX_THM1_100K_PU>;
-				qcom,ratiometric;
-				qcom,hw-settle-time = <200>;
-				qcom,pre-scaling = <1 1>;
-				label = "pa_therm1";
-			};
-
-			channel at 79 {
-				reg = <ADC5_AMUX_THM3_100K_PU>;
-				qcom,ratiometric;
-				qcom,hw-settle-time = <200>;
-				qcom,pre-scaling = <1 1>;
-				label = "pa_therm3";
-			};
-
-			channel at 76 {
-				reg = <ADC5_XO_THERM_100K_PU>;
-				qcom,ratiometric;
-				qcom,hw-settle-time = <200>;
-				qcom,pre-scaling = <1 1>;
-				label = "xo_therm";
-			};
-		};
-
-		rtc at 6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>, <0x6100>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
-		};
-	};
-
-	pms405_1: pms405 at 1 {
-		compatible = "qcom,pms405", "qcom,spmi-pmic";
-		reg = <0x1 SPMI_USID>;
-
-		pms405_spmi_regulators: regulators {
-			compatible = "qcom,pms405-regulators";
-		};
-	};
-};
diff --git a/arch/arm/dts/qcs404-evb-4000.dts b/arch/arm/dts/qcs404-evb-4000.dts
deleted file mode 100644
index 358827c2fbd3..000000000000
--- a/arch/arm/dts/qcs404-evb-4000.dts
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcs404-evb.dtsi"
-
-/ {
-	model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
-	compatible = "qcom,qcs404-evb-4000", "qcom,qcs404-evb",
-		     "qcom,qcs404";
-};
-
-&ethernet {
-	status = "okay";
-
-	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 10000>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet_defaults>;
-
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy1: phy at 4 {
-			compatible = "ethernet-phy-ieee802.3-c22";
-			device_type = "ethernet-phy";
-			reg = <0x4>;
-		};
-	};
-};
-
-&tlmm {
-	ethernet_defaults: ethernet-defaults-state {
-		int-pins {
-			pins = "gpio61";
-			function = "rgmii_int";
-			bias-disable;
-			drive-strength = <2>;
-		};
-		mdc-pins {
-			pins = "gpio76";
-			function = "rgmii_mdc";
-			bias-pull-up;
-		};
-		mdio-pins {
-			pins = "gpio75";
-			function = "rgmii_mdio";
-			bias-pull-up;
-		};
-		tx-pins {
-			pins = "gpio67", "gpio66", "gpio65", "gpio64";
-			function = "rgmii_tx";
-			bias-pull-up;
-			drive-strength = <16>;
-		};
-		rx-pins {
-			pins = "gpio73", "gpio72", "gpio71", "gpio70";
-			function = "rgmii_rx";
-			bias-disable;
-			drive-strength = <2>;
-		};
-		tx-ctl-pins {
-			pins = "gpio68";
-			function = "rgmii_ctl";
-			bias-pull-up;
-			drive-strength = <16>;
-		};
-		rx-ctl-pins {
-			pins = "gpio74";
-			function = "rgmii_ctl";
-			bias-disable;
-			drive-strength = <2>;
-		};
-		tx-ck-pins {
-			pins = "gpio63";
-			function = "rgmii_ck";
-			bias-pull-up;
-			drive-strength = <16>;
-		};
-		rx-ck-pins {
-			pins = "gpio69";
-			function = "rgmii_ck";
-			bias-disable;
-			drive-strength = <2>;
-		};
-	};
-};
diff --git a/arch/arm/dts/qcs404-evb.dtsi b/arch/arm/dts/qcs404-evb.dtsi
deleted file mode 100644
index 10655401528e..000000000000
--- a/arch/arm/dts/qcs404-evb.dtsi
+++ /dev/null
@@ -1,389 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include "qcs404.dtsi"
-#include "pms405.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
-	aliases {
-		serial0 = &blsp1_uart2;
-		serial1 = &blsp1_uart3;
-	};
-
-	chosen {
-		stdout-path = "serial0";
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_ch0_3p3:
-	vdd_esmps3_3p3: vdd-esmps3-3p3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "eSMPS3_3P3";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	usb3_vbus_reg: regulator-usb3-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "VBUS_BOOST_5V";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&pms405_gpios 3 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb_vbus_boost_pin>;
-		vin-supply = <&vph_pwr>;
-		enable-active-high;
-
-		/* TODO: Drop this when introducing role switching */
-		regulator-always-on;
-	};
-};
-
-&blsp1_uart3 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-		vddio-supply = <&vreg_l6_1p8>;
-		vddxo-supply = <&vreg_l5_1p8>;
-		vddrf-supply = <&vreg_l1_1p3>;
-		vddch0-supply = <&vdd_ch0_3p3>;
-
-		local-bd-address = [ 02 00 00 00 5a ad ];
-
-		max-speed = <3200000>;
-	};
-};
-
-&blsp1_dma {
-	qcom,controlled-remotely;
-};
-
-&blsp2_dma {
-	qcom,controlled-remotely;
-};
-
-&gcc {
-	protected-clocks = <GCC_BIMC_CDSP_CLK>,
-			   <GCC_CDSP_CFG_AHB_CLK>,
-			   <GCC_CDSP_BIMC_CLK_SRC>,
-			   <GCC_CDSP_TBU_CLK>,
-			   <141>, /* GCC_WCSS_Q6_AHB_CLK */
-			   <142>; /* GCC_WCSS_Q6_AXIM_CLK */
-};
-
-&pms405_spmi_regulators {
-	vdd_s3-supply = <&vph_pwr>;
-
-	pms405_s3: s3 {
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "vdd_apc";
-		regulator-initial-mode = <1>;
-		regulator-min-microvolt = <1048000>;
-		regulator-max-microvolt = <1384000>;
-	};
-};
-
-&pcie {
-	status = "okay";
-
-	perst-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&perst_state>;
-};
-
-&pcie_phy {
-	status = "okay";
-
-	vdda-vp-supply = <&vreg_l3_1p05>;
-	vdda-vph-supply = <&vreg_l5_1p8>;
-};
-
-&remoteproc_adsp {
-	status = "okay";
-};
-
-&remoteproc_cdsp {
-	status = "okay";
-};
-
-&remoteproc_wcss {
-	status = "okay";
-};
-
-&rpm_requests {
-	regulators {
-		compatible = "qcom,rpm-pms405-regulators";
-
-		vdd_s1-supply = <&vph_pwr>;
-		vdd_s2-supply = <&vph_pwr>;
-		vdd_s3-supply = <&vph_pwr>;
-		vdd_s4-supply = <&vph_pwr>;
-		vdd_s5-supply = <&vph_pwr>;
-		vdd_l1_l2-supply = <&vreg_s5_1p35>;
-		vdd_l3_l8-supply = <&vreg_s5_1p35>;
-		vdd_l4-supply = <&vreg_s5_1p35>;
-		vdd_l5_l6-supply = <&vreg_s4_1p8>;
-		vdd_l7-supply = <&vph_pwr>;
-		vdd_l9-supply = <&vreg_s5_1p35>;
-		vdd_l10_l11_l12_l13-supply = <&vph_pwr>;
-
-		vreg_s4_1p8: s4 {
-			regulator-min-microvolt = <1728000>;
-			regulator-max-microvolt = <1920000>;
-		};
-
-		vreg_s5_1p35: s5 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_l1_1p3: l1 {
-			regulator-min-microvolt = <1240000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_l2_1p275: l2 {
-			regulator-min-microvolt = <1048000>;
-			regulator-max-microvolt = <1280000>;
-		};
-
-		vreg_l3_1p05: l3 {
-			regulator-min-microvolt = <1048000>;
-			regulator-max-microvolt = <1160000>;
-		};
-
-		vreg_l4_1p2: l4 {
-			regulator-min-microvolt = <1144000>;
-			regulator-max-microvolt = <1256000>;
-		};
-
-		vreg_l5_1p8: l5 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vreg_l6_1p8: l6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vreg_l7_1p8: l7 {
-			regulator-min-microvolt = <1616000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
-		vreg_l8_1p2: l8 {
-			regulator-min-microvolt = <1136000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_l10_3p3: l10 {
-			regulator-min-microvolt = <2936000>;
-			regulator-max-microvolt = <3088000>;
-		};
-
-		vreg_l11_sdc2: l11 {
-			regulator-min-microvolt = <2696000>;
-			regulator-max-microvolt = <3304000>;
-		};
-
-		vreg_l12_3p3: l12 {
-			regulator-min-microvolt = <3050000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		vreg_l13_3p3: l13 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3300000>;
-		};
-	};
-};
-
-&sdcc1 {
-	status = "okay";
-
-	supports-cqe;
-	mmc-ddr-1_8v;
-	mmc-hs400-1_8v;
-	bus-width = <8>;
-	non-removable;
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-};
-
-&tlmm {
-	perst_state: perst-state {
-		pins = "gpio43";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	sdc1_on: sdc1-on-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			bias-disable;
-			drive-strength = <16>;
-		};
-
-		cmd-pins {
-			pins = "sdc1_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data-pins {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		rclk-pins {
-			pins = "sdc1_rclk";
-			bias-pull-down;
-		};
-	};
-
-	sdc1_off: sdc1-off-state {
-		clk-pins {
-			pins = "sdc1_clk";
-			bias-disable;
-			drive-strength = <2>;
-		};
-
-		cmd-pins {
-			pins = "sdc1_cmd";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		data-pins {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-
-		rclk-pins {
-			pins = "sdc1_rclk";
-			bias-pull-down;
-		};
-	};
-
-	usb3_id_pin: usb3-id-state {
-		pins = "gpio116";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-pull-up;
-	};
-};
-
-&pms405_gpios {
-	usb_vbus_boost_pin: usb-vbus-boost-state {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <1>;
-		};
-	};
-	usb3_vbus_pin: usb3-vbus-state {
-		pinconf {
-			pins = "gpio12";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			power-source = <1>;
-		};
-	};
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&usb2_phy_sec {
-	vdd-supply = <&vreg_l4_1p2>;
-	vdda1p8-supply = <&vreg_l5_1p8>;
-	vdda3p3-supply = <&vreg_l12_3p3>;
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
-
-};
-
-&usb3_dwc3 {
-	dr_mode = "host";
-};
-
-&usb2_phy_prim {
-	vdd-supply = <&vreg_l4_1p2>;
-	vdda1p8-supply = <&vreg_l5_1p8>;
-	vdda3p3-supply = <&vreg_l12_3p3>;
-	status = "okay";
-};
-
-&usb3_phy {
-	vdd-supply = <&vreg_l3_1p05>;
-	vdda1p8-supply = <&vreg_l5_1p8>;
-	status = "okay";
-};
-
-&wifi {
-	status = "okay";
-	vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
-	vdd-1.8-xo-supply = <&vreg_l5_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l1_1p3>;
-};
-
-/* PINCTRL - additions to nodes defined in qcs404.dtsi */
-
-&blsp1_uart2_default {
-	rx-pins {
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	tx-pins {
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&blsp1_uart3_default {
-	cts-pins {
-		bias-disable;
-	};
-
-	rts-tx-pins {
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	rx-pins {
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm/dts/qcs404.dtsi b/arch/arm/dts/qcs404.dtsi
deleted file mode 100644
index 2721f32dfb71..000000000000
--- a/arch/arm/dts/qcs404.dtsi
+++ /dev/null
@@ -1,1829 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2018, Linaro Limited
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
-#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <19200000>;
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu at 100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x100>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
-			#cooling-cells = <2>;
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU1: cpu at 101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x101>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
-			#cooling-cells = <2>;
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU2: cpu at 102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x102>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
-			#cooling-cells = <2>;
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU3: cpu at 103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x103>;
-			enable-method = "psci";
-			cpu-idle-states = <&CPU_SLEEP_0>;
-			next-level-cache = <&L2_0>;
-			#cooling-cells = <2>;
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		L2_0: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			cache-unified;
-		};
-
-		idle-states {
-			entry-method = "psci";
-
-			CPU_SLEEP_0: cpu-sleep-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "standalone-power-collapse";
-				arm,psci-suspend-param = <0x40000003>;
-				entry-latency-us = <125>;
-				exit-latency-us = <180>;
-				min-residency-us = <595>;
-				local-timer-stop;
-			};
-		};
-	};
-
-	cpu_opp_table: opp-table-cpu {
-		compatible = "operating-points-v2-kryo-cpu";
-		opp-shared;
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&cpr_opp1>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			required-opps = <&cpr_opp2>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			required-opps = <&cpr_opp3>;
-		};
-	};
-
-	cpr_opp_table: opp-table-cpr {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-	firmware {
-		scm: scm {
-			compatible = "qcom,scm-qcs404", "qcom,scm";
-			#reset-cells = <1>;
-		};
-	};
-
-	memory at 80000000 {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the size */
-		reg = <0 0x80000000 0 0>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	rpm: remoteproc {
-		compatible = "qcom,qcs404-rpm-proc", "qcom,rpm-proc";
-
-		glink-edge {
-			compatible = "qcom,glink-rpm";
-
-			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			qcom,rpm-msg-ram = <&rpm_msg_ram>;
-			mboxes = <&apcs_glb 0>;
-
-			rpm_requests: rpm-requests {
-				compatible = "qcom,rpm-qcs404";
-				qcom,glink-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-qcs404", "qcom,rpmcc";
-					#clock-cells = <1>;
-					clocks = <&xo_board>;
-					clock-names = "xo";
-				};
-
-				rpmpd: power-controller {
-					compatible = "qcom,qcs404-rpmpd";
-					#power-domain-cells = <1>;
-					operating-points-v2 = <&rpmpd_opp_table>;
-
-					rpmpd_opp_table: opp-table {
-						compatible = "operating-points-v2";
-
-						rpmpd_opp_ret: opp1 {
-							opp-level = <16>;
-						};
-
-						rpmpd_opp_ret_plus: opp2 {
-							opp-level = <32>;
-						};
-
-						rpmpd_opp_min_svs: opp3 {
-							opp-level = <48>;
-						};
-
-						rpmpd_opp_low_svs: opp4 {
-							opp-level = <64>;
-						};
-
-						rpmpd_opp_svs: opp5 {
-							opp-level = <128>;
-						};
-
-						rpmpd_opp_svs_plus: opp6 {
-							opp-level = <192>;
-						};
-
-						rpmpd_opp_nom: opp7 {
-							opp-level = <256>;
-						};
-
-						rpmpd_opp_nom_plus: opp8 {
-							opp-level = <320>;
-						};
-
-						rpmpd_opp_turbo: opp9 {
-							opp-level = <384>;
-						};
-
-						rpmpd_opp_turbo_no_cpr: opp10 {
-							opp-level = <416>;
-						};
-
-						rpmpd_opp_turbo_plus: opp11 {
-							opp-level = <512>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		tz_apps_mem: memory at 85900000 {
-			reg = <0 0x85900000 0 0x500000>;
-			no-map;
-		};
-
-		xbl_mem: memory at 85e00000 {
-			reg = <0 0x85e00000 0 0x100000>;
-			no-map;
-		};
-
-		smem_region: memory at 85f00000 {
-			reg = <0 0x85f00000 0 0x200000>;
-			no-map;
-		};
-
-		tz_mem: memory at 86100000 {
-			reg = <0 0x86100000 0 0x300000>;
-			no-map;
-		};
-
-		wlan_fw_mem: memory at 86400000 {
-			reg = <0 0x86400000 0 0x1100000>;
-			no-map;
-		};
-
-		adsp_fw_mem: memory at 87500000 {
-			reg = <0 0x87500000 0 0x1a00000>;
-			no-map;
-		};
-
-		cdsp_fw_mem: memory at 88f00000 {
-			reg = <0 0x88f00000 0 0x600000>;
-			no-map;
-		};
-
-		wlan_msa_mem: memory at 89500000 {
-			reg = <0 0x89500000 0 0x100000>;
-			no-map;
-		};
-
-		uefi_mem: memory at 9f800000 {
-			reg = <0 0x9f800000 0 0x800000>;
-			no-map;
-		};
-	};
-
-	smem {
-		compatible = "qcom,smem";
-
-		memory-region = <&smem_region>;
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		hwlocks = <&tcsr_mutex 3>;
-	};
-
-	soc: soc at 0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0xffffffff>;
-		compatible = "simple-bus";
-
-		turingcc: clock-controller at 800000 {
-			compatible = "qcom,qcs404-turingcc";
-			reg = <0x00800000 0x30000>;
-			clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
-
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-
-			status = "disabled";
-		};
-
-		rpm_msg_ram: sram at 60000 {
-			compatible = "qcom,rpm-msg-ram";
-			reg = <0x00060000 0x6000>;
-		};
-
-		usb3_phy: phy at 78000 {
-			compatible = "qcom,usb-ss-28nm-phy";
-			reg = <0x00078000 0x400>;
-			#phy-cells = <0>;
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
-				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
-			clock-names = "ref", "ahb", "pipe";
-			resets = <&gcc GCC_USB3_PHY_BCR>,
-				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "com", "phy";
-			status = "disabled";
-		};
-
-		usb2_phy_prim: phy at 7a000 {
-			compatible = "qcom,usb-hs-28nm-femtophy";
-			reg = <0x0007a000 0x200>;
-			#phy-cells = <0>;
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
-				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "ahb", "sleep";
-			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
-				 <&gcc GCC_USB2A_PHY_BCR>;
-			reset-names = "phy", "por";
-			status = "disabled";
-		};
-
-		usb2_phy_sec: phy at 7c000 {
-			compatible = "qcom,usb-hs-28nm-femtophy";
-			reg = <0x0007c000 0x200>;
-			#phy-cells = <0>;
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
-				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "ahb", "sleep";
-			resets = <&gcc GCC_QUSB2_PHY_BCR>,
-				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
-			reset-names = "phy", "por";
-			status = "disabled";
-		};
-
-		qfprom: qfprom at a4000 {
-			compatible = "qcom,qcs404-qfprom", "qcom,qfprom";
-			reg = <0x000a4000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cpr_efuse_speedbin: speedbin at 13c {
-				reg = <0x13c 0x4>;
-				bits = <2 3>;
-			};
-
-			tsens_s0_p1: s0-p1 at 1f8 {
-				reg = <0x1f8 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s0_p2: s0-p2 at 1f8 {
-				reg = <0x1f8 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s1_p1: s1-p1 at 1f9 {
-				reg = <0x1f9 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s1_p2: s1-p2 at 1fa {
-				reg = <0x1fa 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s2_p1: s2-p1 at 1fb {
-				reg = <0x1fb 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s2_p2: s2-p2 at 1fb {
-				reg = <0x1fb 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s3_p1: s3-p1 at 1fc {
-				reg = <0x1fc 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s3_p2: s3-p2 at 1fd {
-				reg = <0x1fd 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s4_p1: s4-p1 at 1fe {
-				reg = <0x1fe 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s4_p2: s4-p2 at 1fe {
-				reg = <0x1fe 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s5_p1: s5-p1 at 200 {
-				reg = <0x200 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s5_p2: s5-p2 at 200 {
-				reg = <0x200 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s6_p1: s6-p1 at 201 {
-				reg = <0x201 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s6_p2: s6-p2 at 202 {
-				reg = <0x202 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s7_p1: s7-p1 at 203 {
-				reg = <0x203 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s7_p2: s7-p2 at 203 {
-				reg = <0x203 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_s8_p1: s8-p1 at 204 {
-				reg = <0x204 0x2>;
-				bits = <4 6>;
-			};
-
-			tsens_s8_p2: s8-p2 at 205 {
-				reg = <0x205 0x1>;
-				bits = <2 6>;
-			};
-
-			tsens_s9_p1: s9-p1 at 206 {
-				reg = <0x206 0x1>;
-				bits = <0 6>;
-			};
-
-			tsens_s9_p2: s9-p2 at 206 {
-				reg = <0x206 0x2>;
-				bits = <6 6>;
-			};
-
-			tsens_mode: mode at 208 {
-				reg = <0x208 1>;
-				bits = <0 3>;
-			};
-
-			tsens_base1: base1 at 208 {
-				reg = <0x208 2>;
-				bits = <3 8>;
-			};
-
-			tsens_base2: base2 at 208 {
-				reg = <0x209 2>;
-				bits = <3 8>;
-			};
-
-			cpr_efuse_quot_offset1: qoffset1 at 231 {
-				reg = <0x231 0x4>;
-				bits = <4 7>;
-			};
-			cpr_efuse_quot_offset2: qoffset2 at 232 {
-				reg = <0x232 0x4>;
-				bits = <3 7>;
-			};
-			cpr_efuse_quot_offset3: qoffset3 at 233 {
-				reg = <0x233 0x4>;
-				bits = <2 7>;
-			};
-			cpr_efuse_init_voltage1: ivoltage1 at 229 {
-				reg = <0x229 0x4>;
-				bits = <4 6>;
-			};
-			cpr_efuse_init_voltage2: ivoltage2 at 22a {
-				reg = <0x22a 0x4>;
-				bits = <2 6>;
-			};
-			cpr_efuse_init_voltage3: ivoltage3 at 22b {
-				reg = <0x22b 0x4>;
-				bits = <0 6>;
-			};
-			cpr_efuse_quot1: quot1 at 22b {
-				reg = <0x22b 0x4>;
-				bits = <6 12>;
-			};
-			cpr_efuse_quot2: quot2 at 22d {
-				reg = <0x22d 0x4>;
-				bits = <2 12>;
-			};
-			cpr_efuse_quot3: quot3 at 230 {
-				reg = <0x230 0x4>;
-				bits = <0 12>;
-			};
-			cpr_efuse_ring1: ring1 at 228 {
-				reg = <0x228 0x4>;
-				bits = <0 3>;
-			};
-			cpr_efuse_ring2: ring2 at 228 {
-				reg = <0x228 0x4>;
-				bits = <4 3>;
-			};
-			cpr_efuse_ring3: ring3 at 229 {
-				reg = <0x229 0x4>;
-				bits = <0 3>;
-			};
-			cpr_efuse_revision: revision at 218 {
-				reg = <0x218 0x4>;
-				bits = <3 3>;
-			};
-		};
-
-		rng: rng at e3000 {
-			compatible = "qcom,prng-ee";
-			reg = <0x000e3000 0x1000>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		bimc: interconnect at 400000 {
-			reg = <0x00400000 0x80000>;
-			compatible = "qcom,qcs404-bimc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				<&rpmcc RPM_SMD_BIMC_A_CLK>;
-		};
-
-		tsens: thermal-sensor at 4a9000 {
-			compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-			reg = <0x004a9000 0x1000>, /* TM */
-			      <0x004a8000 0x1000>; /* SROT */
-			nvmem-cells = <&tsens_mode>,
-				      <&tsens_base1>, <&tsens_base2>,
-				      <&tsens_s0_p1>, <&tsens_s0_p2>,
-				      <&tsens_s1_p1>, <&tsens_s1_p2>,
-				      <&tsens_s2_p1>, <&tsens_s2_p2>,
-				      <&tsens_s3_p1>, <&tsens_s3_p2>,
-				      <&tsens_s4_p1>, <&tsens_s4_p2>,
-				      <&tsens_s5_p1>, <&tsens_s5_p2>,
-				      <&tsens_s6_p1>, <&tsens_s6_p2>,
-				      <&tsens_s7_p1>, <&tsens_s7_p2>,
-				      <&tsens_s8_p1>, <&tsens_s8_p2>,
-				      <&tsens_s9_p1>, <&tsens_s9_p2>;
-			nvmem-cell-names = "mode",
-					   "base1", "base2",
-					   "s0_p1", "s0_p2",
-					   "s1_p1", "s1_p2",
-					   "s2_p1", "s2_p2",
-					   "s3_p1", "s3_p2",
-					   "s4_p1", "s4_p2",
-					   "s5_p1", "s5_p2",
-					   "s6_p1", "s6_p2",
-					   "s7_p1", "s7_p2",
-					   "s8_p1", "s8_p2",
-					   "s9_p1", "s9_p2";
-			#qcom,sensors = <10>;
-			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow";
-			#thermal-sensor-cells = <1>;
-		};
-
-		pcnoc: interconnect at 500000 {
-			reg = <0x00500000 0x15080>;
-			compatible = "qcom,qcs404-pcnoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
-				<&rpmcc RPM_SMD_PNOC_A_CLK>;
-		};
-
-		snoc: interconnect at 580000 {
-			reg = <0x00580000 0x23080>;
-			compatible = "qcom,qcs404-snoc";
-			#interconnect-cells = <1>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				<&rpmcc RPM_SMD_SNOC_A_CLK>;
-		};
-
-		remoteproc_cdsp: remoteproc at b00000 {
-			compatible = "qcom,qcs404-cdsp-pas";
-			reg = <0x00b00000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
-					      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			/*
-			 * If the node was using the PIL binding, then include properties:
-			 * clocks = <&xo_board>,
-			 *          <&gcc GCC_CDSP_CFG_AHB_CLK>,
-			 *          <&gcc GCC_CDSP_TBU_CLK>,
-			 *          <&gcc GCC_BIMC_CDSP_CLK>,
-			 *          <&turingcc TURING_WRAPPER_AON_CLK>,
-			 *          <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
-			 *          <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
-			 *          <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
-			 * clock-names = "xo",
-			 *               "sway",
-			 *               "tbu",
-			 *               "bimc",
-			 *               "ahb_aon",
-			 *               "q6ss_slave",
-			 *               "q6ss_master",
-			 *               "q6_axim";
-			 * resets = <&gcc GCC_CDSP_RESTART>;
-			 * reset-names = "restart";
-			 * qcom,halt-regs = <&tcsr 0x19004>;
-			 */
-
-			memory-region = <&cdsp_fw_mem>;
-
-			qcom,smem-states = <&cdsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,remote-pid = <5>;
-				mboxes = <&apcs_glb 12>;
-
-				label = "cdsp";
-			};
-		};
-
-		usb3: usb at 7678800 {
-			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
-			reg = <0x07678800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&gcc GCC_USB30_MASTER_CLK>,
-				 <&gcc GCC_SYS_NOC_USB3_CLK>,
-				 <&gcc GCC_USB30_SLEEP_CLK>,
-				 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
-			clock-names = "core", "iface", "sleep", "mock_utmi";
-			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-			status = "disabled";
-
-			usb3_dwc3: usb at 7580000 {
-				compatible = "snps,dwc3";
-				reg = <0x07580000 0xcd00>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy_prim>, <&usb3_phy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,has-lpm-erratum;
-				snps,hird-threshold = /bits/ 8 <0x10>;
-				snps,usb3_lpm_capable;
-				dr_mode = "otg";
-			};
-		};
-
-		usb2: usb at 79b8800 {
-			compatible = "qcom,qcs404-dwc3", "qcom,dwc3";
-			reg = <0x079b8800 0x400>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
-				 <&gcc GCC_PCNOC_USB2_CLK>,
-				 <&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
-				 <&gcc GCC_USB20_MOCK_UTMI_CLK>;
-			clock-names = "core", "iface", "sleep", "mock_utmi";
-			assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB_HS_SYSTEM_CLK>;
-			assigned-clock-rates = <19200000>, <133333333>;
-			status = "disabled";
-
-			usb at 78c0000 {
-				compatible = "snps,dwc3";
-				reg = <0x078c0000 0xcc00>;
-				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy_sec>;
-				phy-names = "usb2-phy";
-				snps,has-lpm-erratum;
-				snps,hird-threshold = /bits/ 8 <0x10>;
-				snps,usb3_lpm_capable;
-				dr_mode = "peripheral";
-			};
-		};
-
-		tlmm: pinctrl at 1000000 {
-			compatible = "qcom,qcs404-pinctrl";
-			reg = <0x01000000 0x200000>,
-			      <0x01300000 0x200000>,
-			      <0x07b00000 0x200000>;
-			reg-names = "south", "north", "east";
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-ranges = <&tlmm 0 0 120>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			blsp1_i2c0_default: blsp1-i2c0-default-state {
-				pins = "gpio32", "gpio33";
-				function = "blsp_i2c0";
-			};
-
-			blsp1_i2c1_default: blsp1-i2c1-default-state {
-				pins = "gpio24", "gpio25";
-				function = "blsp_i2c1";
-			};
-
-			blsp1_i2c2_default: blsp1-i2c2-default-state {
-				sda-pins {
-					pins = "gpio19";
-					function = "blsp_i2c_sda_a2";
-				};
-
-				scl-pins {
-					pins = "gpio20";
-					function = "blsp_i2c_scl_a2";
-				};
-			};
-
-			blsp1_i2c3_default: blsp1-i2c3-default-state {
-				pins = "gpio84", "gpio85";
-				function = "blsp_i2c3";
-			};
-
-			blsp1_i2c4_default: blsp1-i2c4-default-state {
-				pins = "gpio117", "gpio118";
-				function = "blsp_i2c4";
-			};
-
-			blsp1_uart0_default: blsp1-uart0-default-state {
-				pins = "gpio30", "gpio31", "gpio32", "gpio33";
-				function = "blsp_uart0";
-			};
-
-			blsp1_uart1_default: blsp1-uart1-default-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_uart1";
-			};
-
-			blsp1_uart2_default: blsp1-uart2-default-state {
-				rx-pins {
-					pins = "gpio18";
-					function = "blsp_uart_rx_a2";
-				};
-
-				tx-pins {
-					pins = "gpio17";
-					function = "blsp_uart_tx_a2";
-				};
-			};
-
-			blsp1_uart3_default: blsp1-uart3-default-state {
-				cts-pins {
-					pins = "gpio84";
-					function = "blsp_uart3";
-				};
-
-				rts-tx-pins {
-					pins = "gpio85", "gpio82";
-					function = "blsp_uart3";
-				};
-
-				rx-pins {
-					pins = "gpio83";
-					function = "blsp_uart3";
-				};
-			};
-
-			blsp2_i2c0_default: blsp2-i2c0-default-state {
-				pins = "gpio28", "gpio29";
-				function = "blsp_i2c5";
-			};
-
-			blsp1_spi0_default: blsp1-spi0-default-state {
-				pins = "gpio30", "gpio31", "gpio32", "gpio33";
-				function = "blsp_spi0";
-			};
-
-			blsp1_spi1_default: blsp1-spi1-default-state {
-				mosi-pins {
-					pins = "gpio22";
-					function = "blsp_spi_mosi_a1";
-				};
-
-				miso-pins {
-					pins = "gpio23";
-					function = "blsp_spi_miso_a1";
-				};
-
-				cs-n-pins {
-					pins = "gpio24";
-					function = "blsp_spi_cs_n_a1";
-				};
-
-				clk-pins {
-					pins = "gpio25";
-					function = "blsp_spi_clk_a1";
-				};
-			};
-
-			blsp1_spi2_default: blsp1-spi2-default-state {
-				pins = "gpio17", "gpio18", "gpio19", "gpio20";
-				function = "blsp_spi2";
-			};
-
-			blsp1_spi3_default: blsp1-spi3-default-state {
-				pins = "gpio82", "gpio83", "gpio84", "gpio85";
-				function = "blsp_spi3";
-			};
-
-			blsp1_spi4_default: blsp1-spi4-default-state {
-				pins = "gpio37", "gpio38", "gpio117", "gpio118";
-				function = "blsp_spi4";
-			};
-
-			blsp2_spi0_default: blsp2-spi0-default-state {
-				pins = "gpio26", "gpio27", "gpio28", "gpio29";
-				function = "blsp_spi5";
-			};
-
-			blsp2_uart0_default: blsp2-uart0-default-state {
-				pins = "gpio26", "gpio27", "gpio28", "gpio29";
-				function = "blsp_uart5";
-			};
-		};
-
-		gcc: clock-controller at 1800000 {
-			compatible = "qcom,gcc-qcs404";
-			reg = <0x01800000 0x80000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-
-			clocks = <&xo_board>,
-				 <&sleep_clk>,
-				 <&pcie_phy>,
-				 <0>,
-				 <0>,
-				 <0>;
-
-			assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
-			assigned-clock-rates = <19200000>;
-		};
-
-		tcsr_mutex: hwlock at 1905000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0x01905000 0x20000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr: syscon at 1937000 {
-			compatible = "qcom,qcs404-tcsr", "syscon";
-			reg = <0x01937000 0x25000>;
-		};
-
-		sram at 290000 {
-			compatible = "qcom,rpm-stats";
-			reg = <0x00290000 0x10000>;
-		};
-
-		spmi_bus: spmi at 200f000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x0200f000 0x001000>,
-			      <0x02400000 0x800000>,
-			      <0x02c00000 0x800000>,
-			      <0x03800000 0x200000>,
-			      <0x0200a000 0x002100>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		remoteproc_wcss: remoteproc at 7400000 {
-			compatible = "qcom,qcs404-wcss-pas";
-			reg = <0x07400000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
-					      <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			memory-region = <&wlan_fw_mem>;
-
-			qcom,smem-states = <&wcss_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,remote-pid = <1>;
-				mboxes = <&apcs_glb 16>;
-
-				label = "wcss";
-			};
-		};
-
-		pcie_phy: phy at 7786000 {
-			compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
-			reg = <0x07786000 0xb8>;
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-			resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
-				 <&gcc GCC_PCIE_0_PIPE_ARES>;
-			reset-names = "phy", "pipe";
-
-			clock-output-names = "pcie_0_pipe_clk";
-			#clock-cells = <0>;
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		sdcc1: mmc at 7804000 {
-			compatible = "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
-			reg-names = "hc", "cqhci";
-
-			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-
-			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
-				 <&gcc GCC_SDCC1_APPS_CLK>,
-				 <&xo_board>;
-			clock-names = "iface", "core", "xo";
-
-			status = "disabled";
-		};
-
-		blsp1_dma: dma-controller at 7884000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07884000 0x25000>;
-			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			status = "okay";
-		};
-
-		blsp1_uart0: serial at 78af000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078af000 0x200>;
-			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART0_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart0_default>;
-			status = "disabled";
-		};
-
-		blsp1_uart1: serial at 78b0000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078b0000 0x200>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart1_default>;
-			status = "disabled";
-		};
-
-		blsp1_uart2: serial at 78b1000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078b1000 0x200>;
-			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 4>, <&blsp1_dma 5>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			status = "okay";
-		};
-
-		ethernet: ethernet at 7a80000 {
-			compatible = "qcom,qcs404-ethqos";
-			reg = <0x07a80000 0x10000>,
-				<0x07a96000 0x100>;
-			reg-names = "stmmaceth", "rgmii";
-			clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
-			clocks = <&gcc GCC_ETH_AXI_CLK>,
-				<&gcc GCC_ETH_SLAVE_AHB_CLK>,
-				<&gcc GCC_ETH_PTP_CLK>,
-				<&gcc GCC_ETH_RGMII_CLK>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq", "eth_lpi";
-
-			snps,tso;
-			rx-fifo-depth = <4096>;
-			tx-fifo-depth = <4096>;
-
-			status = "disabled";
-		};
-
-		wifi: wifi at a000000 {
-			compatible = "qcom,wcn3990-wifi";
-			reg = <0xa000000 0x800000>;
-			reg-names = "membase";
-			memory-region = <&wlan_msa_mem>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		blsp1_uart3: serial at 78b2000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x078b2000 0x200>;
-			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_uart3_default>;
-			status = "disabled";
-		};
-
-		blsp1_i2c0: i2c at 78b5000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b5000 0x600>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP0_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c0_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi0: spi at 78b5000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b5000 0x600>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP0_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_spi0_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c1: i2c at 78b6000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b6000 0x600>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c1_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi1: spi at 78b6000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b6000 0x600>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_spi1_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c2: i2c at 78b7000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b7000 0x600>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c2_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi2: spi at 78b7000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b7000 0x600>;
-			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_spi2_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c3: i2c at 78b8000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b8000 0x600>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c3_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi3: spi at 78b8000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b8000 0x600>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_spi3_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_i2c4: i2c at 78b9000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x078b9000 0x600>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_i2c4_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp1_spi4: spi at 78b9000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x078b9000 0x600>;
-			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP1_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp1_spi4_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_dma: dma-controller at 7ac4000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0x07ac4000 0x17000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			status = "disabled";
-		};
-
-		blsp2_uart0: serial at 7aef000 {
-			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
-			reg = <0x07aef000 0x200>;
-			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_UART0_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
-			dma-names = "tx", "rx";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_uart0_default>;
-			status = "disabled";
-		};
-
-		blsp2_i2c0: i2c at 7af5000 {
-			compatible = "qcom,i2c-qup-v2.2.1";
-			reg = <0x07af5000 0x600>;
-			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP0_I2C_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_i2c0_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		blsp2_spi0: spi at 7af5000 {
-			compatible = "qcom,spi-qup-v2.2.1";
-			reg = <0x07af5000 0x600>;
-			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_QUP0_SPI_APPS_CLK>,
-				 <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "core", "iface";
-			pinctrl-names = "default";
-			pinctrl-0 = <&blsp2_spi0_default>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sram at 8600000 {
-			compatible = "qcom,qcs404-imem", "syscon", "simple-mfd";
-			reg = <0x08600000 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0x08600000 0x1000>;
-
-			pil-reloc at 94c {
-				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
-			};
-		};
-
-		intc: interrupt-controller at b000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x0b000000 0x1000>,
-			      <0x0b002000 0x1000>;
-		};
-
-		apcs_glb: mailbox at b011000 {
-			compatible = "qcom,qcs404-apcs-apps-global",
-				     "qcom,msm8916-apcs-kpss-global", "syscon";
-			reg = <0x0b011000 0x1000>;
-			#mbox-cells = <1>;
-			clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
-			clock-names = "pll", "aux";
-			#clock-cells = <0>;
-		};
-
-		apcs_hfpll: clock-controller at b016000 {
-			compatible = "qcom,hfpll";
-			reg = <0x0b016000 0x30>;
-			#clock-cells = <0>;
-			clock-output-names = "apcs_hfpll";
-			clocks = <&xo_board>;
-			clock-names = "xo";
-		};
-
-		watchdog at b017000 {
-			compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt";
-			reg = <0x0b017000 0x1000>;
-			clocks = <&sleep_clk>;
-		};
-
-		cpr: power-controller at b018000 {
-			compatible = "qcom,qcs404-cpr", "qcom,cpr";
-			reg = <0x0b018000 0x1000>;
-			interrupts = <0 15 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&xo_board>;
-			clock-names = "ref";
-			vdd-apc-supply = <&pms405_s3>;
-			#power-domain-cells = <0>;
-			operating-points-v2 = <&cpr_opp_table>;
-			acc-syscon = <&tcsr>;
-
-			nvmem-cells = <&cpr_efuse_quot_offset1>,
-				<&cpr_efuse_quot_offset2>,
-				<&cpr_efuse_quot_offset3>,
-				<&cpr_efuse_init_voltage1>,
-				<&cpr_efuse_init_voltage2>,
-				<&cpr_efuse_init_voltage3>,
-				<&cpr_efuse_quot1>,
-				<&cpr_efuse_quot2>,
-				<&cpr_efuse_quot3>,
-				<&cpr_efuse_ring1>,
-				<&cpr_efuse_ring2>,
-				<&cpr_efuse_ring3>,
-				<&cpr_efuse_revision>;
-			nvmem-cell-names = "cpr_quotient_offset1",
-				"cpr_quotient_offset2",
-				"cpr_quotient_offset3",
-				"cpr_init_voltage1",
-				"cpr_init_voltage2",
-				"cpr_init_voltage3",
-				"cpr_quotient1",
-				"cpr_quotient2",
-				"cpr_quotient3",
-				"cpr_ring_osc1",
-				"cpr_ring_osc2",
-				"cpr_ring_osc3",
-				"cpr_fuse_revision";
-		};
-
-		timer at b120000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0x0b120000 0x1000>;
-			clock-frequency = <19200000>;
-
-			frame at b121000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b121000 0x1000>,
-				      <0x0b122000 0x1000>;
-			};
-
-			frame at b123000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b123000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b124000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b124000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b125000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b125000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b126000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b126000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b127000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0xb127000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at b128000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x0b128000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		remoteproc_adsp: remoteproc at c700000 {
-			compatible = "qcom,qcs404-adsp-pas";
-			reg = <0x0c700000 0x4040>;
-
-			interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack";
-
-			clocks = <&xo_board>;
-			clock-names = "xo";
-
-			memory-region = <&adsp_fw_mem>;
-
-			qcom,smem-states = <&adsp_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-
-				qcom,remote-pid = <2>;
-				mboxes = <&apcs_glb 8>;
-
-				label = "adsp";
-			};
-		};
-
-		pcie: pci at 10000000 {
-			compatible = "qcom,pcie-qcs404";
-			reg = <0x10000000 0xf1d>,
-			      <0x10000f20 0xa8>,
-			      <0x07780000 0x2000>,
-			      <0x10001000 0x2000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0x0 0x00000000 0x10003000 0x0 0x00010000>, /* I/O */
-				 <0x82000000 0x0 0x10013000 0x10013000 0x0 0x007ed000>; /* memory */
-
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-			clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_AUX_CLK>,
-				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-			clock-names = "iface", "aux", "master_bus", "slave_bus";
-
-			resets = <&gcc GCC_PCIE_0_AXI_MASTER_ARES>,
-				 <&gcc GCC_PCIE_0_AXI_SLAVE_ARES>,
-				 <&gcc GCC_PCIE_0_AXI_MASTER_STICKY_ARES>,
-				 <&gcc GCC_PCIE_0_CORE_STICKY_ARES>,
-				 <&gcc GCC_PCIE_0_BCR>,
-				 <&gcc GCC_PCIE_0_AHB_ARES>;
-			reset-names = "axi_m",
-				      "axi_s",
-				      "axi_m_sticky",
-				      "pipe_sticky",
-				      "pwr",
-				      "ahb";
-
-			phys = <&pcie_phy>;
-			phy-names = "pciephy";
-
-			status = "disabled";
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 0xff08>,
-			     <GIC_PPI 3 0xff08>,
-			     <GIC_PPI 4 0xff08>,
-			     <GIC_PPI 1 0xff08>;
-	};
-
-	smp2p-adsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-		interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs_glb 10>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-cdsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <94>, <432>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs_glb 14>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <5>;
-
-		cdsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		cdsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-wcss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apcs_glb 18>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		wcss_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		wcss_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	thermal-zones {
-		aoss-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				aoss_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		q6-hvx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				q6_hvx_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		lpass-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				lpass_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		cluster-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cluster_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cluster_alert1: trip-point1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cluster_crit: cluster-crit {
-					temperature = <120000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cluster_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu0_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cpu0_alert1: trip-point1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu0_crit: cpu-crit {
-					temperature = <120000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu0_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu1_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cpu1_alert1: trip-point1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu1_crit: cpu-crit {
-					temperature = <120000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu1_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu2_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cpu2_alert1: trip-point1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu2_crit: cpu-crit {
-					temperature = <120000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu2_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu3_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cpu3_alert1: trip-point1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				cpu3_crit: cpu-crit {
-					temperature = <120000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-			cooling-maps {
-				map0 {
-					trip = <&cpu3_alert1>;
-					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-						       <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				gpu_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/dts/sdm845-db845c.dts b/arch/arm/dts/sdm845-db845c.dts
deleted file mode 100644
index c7eba6c491be..000000000000
--- a/arch/arm/dts/sdm845-db845c.dts
+++ /dev/null
@@ -1,1190 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2019, Linaro Ltd.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include <dt-bindings/sound/qcom,q6afe.h>
-#include <dt-bindings/sound/qcom,q6asm.h>
-#include "sdm845.dtsi"
-#include "sdm845-wcd9340.dtsi"
-#include "pm8998.dtsi"
-#include "pmi8998.dtsi"
-
-/ {
-	model = "Thundercomm Dragonboard 845c";
-	compatible = "thundercomm,db845c", "qcom,sdm845";
-	qcom,msm-id = <341 0x20001>;
-	qcom,board-id = <8 0>;
-
-	aliases {
-		serial0 = &uart9;
-		serial1 = &uart6;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* Fixed crystal oscillator dedicated to MCP2517FD */
-	clk40M: can-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <40000000>;
-	};
-
-	dc12v: dc12v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "DC12V";
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&vol_up_pin_a>;
-
-		key-vol-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-0 {
-			label = "green:user4";
-			function = LED_FUNCTION_INDICATOR;
-			color = <LED_COLOR_ID_GREEN>;
-			gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "panic-indicator";
-			default-state = "off";
-		};
-
-		led-1 {
-			label = "yellow:wlan";
-			function = LED_FUNCTION_WLAN;
-			color = <LED_COLOR_ID_YELLOW>;
-			gpios = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led-2 {
-			label = "blue:bt";
-			function = LED_FUNCTION_BLUETOOTH;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&pm8998_gpios 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-
-	hdmi-out {
-		compatible = "hdmi-connector";
-		type = "a";
-
-		port {
-			hdmi_con: endpoint {
-				remote-endpoint = <&lt9611_out>;
-			};
-		};
-	};
-
-	reserved-memory {
-		/* Cont splash region set up by the bootloader */
-		cont_splash_mem: framebuffer at 9d400000 {
-			reg = <0x0 0x9d400000 0x0 0x2400000>;
-			no-map;
-		};
-	};
-
-	lt9611_1v8: lt9611-vdd18-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "LT9611_1V8";
-
-		vin-supply = <&vdc_5v>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	lt9611_3v3: lt9611-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "LT9611_3V3";
-
-		vin-supply = <&vdc_3v3>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	pcie0_1p05v: pcie-0-1p05v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "PCIE0_1.05V";
-
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <1050000>;
-		regulator-max-microvolt = <1050000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	cam0_dvdd_1v2: cam0-dvdd-1v2-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM0_DVDD_1V2";
-		regulator-min-microvolt = <1200000>;
-		regulator-max-microvolt = <1200000>;
-		enable-active-high;
-		gpio = <&pm8998_gpios 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_dvdd_1v2_en_default>;
-		vin-supply = <&vbat>;
-	};
-
-	cam0_avdd_2v8: cam0-avdd-2v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM0_AVDD_2V8";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		enable-active-high;
-		gpio = <&pm8998_gpios 10 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam0_avdd_2v8_en_default>;
-		vin-supply = <&vbat>;
-	};
-
-	/* This regulator is enabled when the VREG_LVS1A_1P8 trace is enabled */
-	cam3_avdd_2v8: cam3-avdd-2v8-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "CAM3_AVDD_2V8";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		regulator-always-on;
-		vin-supply = <&vbat>;
-	};
-
-	pcie0_3p3v_dual: vldo-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VLDO_3V3";
-
-		vin-supply = <&vbat>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pcie0_pwren_state>;
-	};
-
-	v5p0_hdmiout: v5p0-hdmiout-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "V5P0_HDMIOUT";
-
-		vin-supply = <&vdc_5v>;
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <500000>;
-
-		/*
-		 * TODO: make it possible to drive same GPIO from two clients
-		 * gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
-		 * enable-active-high;
-		 */
-	};
-
-	vbat: vbat-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-	};
-
-	vbat_som: vbat-som-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VBAT_SOM";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <4200000>;
-		regulator-max-microvolt = <4200000>;
-		regulator-always-on;
-	};
-
-	vdc_3v3: vdc-3v3-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDC_3V3";
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	vdc_5v: vdc-5v-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "VDC_5V";
-
-		vin-supply = <&dc12v>;
-		regulator-min-microvolt = <500000>;
-		regulator-max-microvolt = <500000>;
-		regulator-always-on;
-	};
-
-	vreg_s4a_1p8: vreg-s4a-1p8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s4a_1p8";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-
-		vin-supply = <&vbat_som>;
-	};
-};
-
-&adsp_pas {
-	status = "okay";
-
-	firmware-name = "qcom/sdm845/adsp.mbn";
-};
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-		vdd-s11-supply = <&vph_pwr>;
-		vdd-s12-supply = <&vph_pwr>;
-		vdd-s13-supply = <&vph_pwr>;
-		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
-		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
-		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
-		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
-		vdd-l6-supply = <&vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
-		vdd-l9-supply = <&vreg_bob>;
-		vdd-l10-l23-l25-supply = <&vreg_bob>;
-		vdd-l13-l19-l21-supply = <&vreg_bob>;
-		vdd-l16-l28-supply = <&vreg_bob>;
-		vdd-l18-l22-supply = <&vreg_bob>;
-		vdd-l20-l24-supply = <&vreg_bob>;
-		vdd-l26-supply = <&vreg_s3a_1p35>;
-		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
-
-		vreg_s3a_1p35: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_s5a_2p04: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		vreg_s7a_1p025: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vreg_l1a_0p875: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5a_0p8: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a_1p8: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l13a_2p95: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17a_1p3: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l20a_2p95: ldo20 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l21a_2p95: ldo21 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2968000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l24a_3p075: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l25a_3p3: ldo25 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l26a_1p2: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pmi8998-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob-supply = <&vph_pwr>;
-
-		vreg_bob: bob {
-			regulator-min-microvolt = <3312000>;
-			regulator-max-microvolt = <3600000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-			regulator-allow-bypass;
-		};
-	};
-};
-
-&camss {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&cdsp_pas {
-	status = "okay";
-	firmware-name = "qcom/sdm845/cdsp.mbn";
-};
-
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-			   <GCC_QSPI_CORE_CLK_SRC>,
-			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-			   <GCC_LPASS_Q6_AXI_CLK>,
-			   <GCC_LPASS_SWAY_CLK>;
-};
-
-&gmu {
-	status = "okay";
-};
-
-&gpi_dma0 {
-	status = "okay";
-};
-
-&gpi_dma1 {
-	status = "okay";
-};
-
-&gpu {
-	status = "okay";
-	zap-shader {
-		memory-region = <&gpu_mem>;
-		firmware-name = "qcom/sdm845/a630_zap.mbn";
-	};
-};
-
-&i2c10 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	lt9611_codec: hdmi-bridge at 3b {
-		compatible = "lontium,lt9611";
-		reg = <0x3b>;
-		#sound-dai-cells = <1>;
-
-		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
-
-		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
-
-		vdd-supply = <&lt9611_1v8>;
-		vcc-supply = <&lt9611_3v3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port at 0 {
-				reg = <0>;
-
-				lt9611_a: endpoint {
-					remote-endpoint = <&mdss_dsi0_out>;
-				};
-			};
-
-			port at 1 {
-				reg = <1>;
-
-				lt9611_b: endpoint {
-					remote-endpoint = <&mdss_dsi1_out>;
-				};
-			};
-
-			port at 2 {
-				reg = <2>;
-
-				lt9611_out: endpoint {
-					remote-endpoint = <&hdmi_con>;
-				};
-			};
-		};
-	};
-};
-
-&i2c11 {
-	/* On Low speed expansion */
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&i2c14 {
-	/* On Low speed expansion */
-	clock-frequency = <100000>;
-	status = "okay";
-};
-
-&mdss {
-	memory-region = <&cont_splash_mem>;
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-	qcom,master-dsi;
-
-	ports {
-		port at 1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vreg_l1a_0p875>;
-};
-
-&mdss_dsi1 {
-	vdda-supply = <&vreg_l26a_1p2>;
-
-	qcom,dual-dsi-mode;
-
-	/* DSI1 is slave, so use DSI0 clocks */
-	assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
-	status = "okay";
-
-	ports {
-		port at 1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&mdss_dsi1_phy {
-	vdds-supply = <&vreg_l1a_0p875>;
-	status = "okay";
-};
-
-&mss_pil {
-	status = "okay";
-	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
-};
-
-&pcie0 {
-	status = "okay";
-	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	enable-gpio = <&tlmm 134 GPIO_ACTIVE_HIGH>;
-
-	vddpe-3v3-supply = <&pcie0_3p3v_dual>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_default_state>;
-};
-
-&pcie0_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pcie1 {
-	status = "okay";
-	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie1_default_state>;
-};
-
-&pcie1_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&pm8998_gpios {
-	gpio-line-names =
-		"NC",
-		"NC",
-		"WLAN_SW_CTRL",
-		"NC",
-		"PM_GPIO5_BLUE_BT_LED",
-		"VOL_UP_N",
-		"NC",
-		"ADC_IN1",
-		"PM_GPIO9_YEL_WIFI_LED",
-		"CAM0_AVDD_EN",
-		"NC",
-		"CAM0_DVDD_EN",
-		"PM_GPIO13_GREEN_U4_LED",
-		"DIV_CLK2",
-		"NC",
-		"NC",
-		"NC",
-		"SMB_STAT",
-		"NC",
-		"NC",
-		"ADC_IN2",
-		"OPTION1",
-		"WCSS_PWR_REQ",
-		"PM845_GPIO24",
-		"OPTION2",
-		"PM845_SLB";
-
-	cam0_dvdd_1v2_en_default: cam0-dvdd-1v2-en-state {
-		pins = "gpio12";
-		function = "normal";
-
-		bias-pull-up;
-		drive-push-pull;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	cam0_avdd_2v8_en_default: cam0-avdd-2v8-en-state {
-		pins = "gpio10";
-		function = "normal";
-
-		bias-pull-up;
-		drive-push-pull;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
-	};
-
-	vol_up_pin_a: vol-up-active-state {
-		pins = "gpio6";
-		function = "normal";
-		input-enable;
-		bias-pull-up;
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-	};
-};
-
-&pm8998_resin {
-	linux,code = <KEY_VOLUMEDOWN>;
-	status = "okay";
-};
-
-&pmi8998_lpg {
-	status = "okay";
-
-	qcom,power-source = <1>;
-
-	led at 3 {
-		reg = <3>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_HEARTBEAT;
-		function-enumerator = <3>;
-
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-
-	led at 4 {
-		reg = <4>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <2>;
-	};
-
-	led at 5 {
-		reg = <5>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_INDICATOR;
-		function-enumerator = <1>;
-	};
-};
-
-/* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
-&q6afedai {
-	dai at 22 {
-		reg = <QUATERNARY_MI2S_RX>;
-		qcom,sd-lines = <0 1 2 3>;
-	};
-};
-
-&q6asmdai {
-	dai at 0 {
-		reg = <0>;
-	};
-
-	dai at 1 {
-		reg = <1>;
-	};
-
-	dai at 2 {
-		reg = <2>;
-	};
-
-	dai at 3 {
-		reg = <3>;
-		direction = <2>;
-		is-compress-dai;
-	};
-};
-
-&qupv3_id_0 {
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
-
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vreg_l13a_2p95>;
-
-	bus-width = <4>;
-	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
-};
-
-&sound {
-	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
-	pinctrl-0 = <&quat_mi2s_active
-			 &quat_mi2s_sd0_active
-			 &quat_mi2s_sd1_active
-			 &quat_mi2s_sd2_active
-			 &quat_mi2s_sd3_active>;
-	pinctrl-names = "default";
-	model = "DB845c";
-	audio-routing =
-		"RX_BIAS", "MCLK",
-		"AMIC1", "MIC BIAS1",
-		"AMIC2", "MIC BIAS2",
-		"DMIC0", "MIC BIAS1",
-		"DMIC1", "MIC BIAS1",
-		"DMIC2", "MIC BIAS3",
-		"DMIC3", "MIC BIAS3",
-		"SpkrLeft IN", "SPK1 OUT",
-		"SpkrRight IN", "SPK2 OUT",
-		"MM_DL1",  "MultiMedia1 Playback",
-		"MM_DL2",  "MultiMedia2 Playback",
-		"MM_DL4",  "MultiMedia4 Playback",
-		"MultiMedia3 Capture", "MM_UL3";
-
-	mm1-dai-link {
-		link-name = "MultiMedia1";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
-		};
-	};
-
-	mm2-dai-link {
-		link-name = "MultiMedia2";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
-		};
-	};
-
-	mm3-dai-link {
-		link-name = "MultiMedia3";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
-		};
-	};
-
-	mm4-dai-link {
-		link-name = "MultiMedia4";
-		cpu {
-			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA4>;
-		};
-	};
-
-	hdmi-dai-link {
-		link-name = "HDMI Playback";
-		cpu {
-			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&lt9611_codec 0>;
-		};
-	};
-
-	slim-dai-link {
-		link-name = "SLIM Playback";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_RX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
-		};
-	};
-
-	slimcap-dai-link {
-		link-name = "SLIM Capture";
-		cpu {
-			sound-dai = <&q6afedai SLIMBUS_0_TX>;
-		};
-
-		platform {
-			sound-dai = <&q6routing>;
-		};
-
-		codec {
-			sound-dai = <&wcd9340 1>;
-		};
-	};
-};
-
-&spi0 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qup_spi0_default>;
-	cs-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-
-	can at 0 {
-		compatible = "microchip,mcp2517fd";
-		reg = <0>;
-		clocks = <&clk40M>;
-		interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>;
-		spi-max-frequency = <10000000>;
-		vdd-supply = <&vdc_5v>;
-		xceiver-supply = <&vdc_5v>;
-	};
-};
-
-&spi2 {
-	/* On Low speed expansion */
-	status = "okay";
-};
-
-&tlmm {
-	cam0_default: cam0-default-state {
-		rst-pins {
-			pins = "gpio9";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		mclk0-pins {
-			pins = "gpio13";
-			function = "cam_mclk";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	cam3_default: cam3-default-state {
-		rst-pins {
-			function = "gpio";
-			pins = "gpio21";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		mclk3-pins {
-			function = "cam_mclk";
-			pins = "gpio16";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	dsi_sw_sel: dsi-sw-sel-state {
-		pins = "gpio120";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-		output-high;
-	};
-
-	lt9611_irq_pin: lt9611-irq-state {
-		pins = "gpio84";
-		function = "gpio";
-		bias-disable;
-	};
-
-	pcie0_default_state: pcie0-default-state {
-		clkreq-pins {
-			pins = "gpio36";
-			function = "pci_e0";
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio35";
-			function = "gpio";
-
-			drive-strength = <2>;
-			output-low;
-			bias-pull-down;
-		};
-
-		wake-n-pins {
-			pins = "gpio37";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie0_pwren_state: pcie0-pwren-state {
-		pins = "gpio90";
-		function = "gpio";
-
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie1_default_state: pcie1-default-state {
-		perst-n-pins {
-			pins = "gpio102";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-disable;
-		};
-
-		clkreq-pins {
-			pins = "gpio103";
-			function = "pci_e1";
-			bias-pull-up;
-		};
-
-		wake-n-pins {
-			pins = "gpio11";
-			function = "gpio";
-
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio75";
-			function = "gpio";
-
-			drive-strength = <16>;
-			bias-pull-up;
-			output-high;
-		};
-	};
-
-	sdc2_default_state: sdc2-default-state {
-		clk-pins {
-			pins = "sdc2_clk";
-			bias-disable;
-
-			/*
-			 * It seems that mmc_test reports errors if drive
-			 * strength is not 16 on clk, cmd, and data pins.
-			 */
-			drive-strength = <16>;
-		};
-
-		cmd-pins {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-
-		data-pins {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <10>;
-		};
-	};
-
-	sdc2_card_det_n: sd-card-det-n-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-pull-up;
-	};
-};
-
-&uart3 {
-	label = "LS-UART0";
-	pinctrl-0 = <&qup_uart3_4pin>;
-
-	status = "disabled";
-};
-
-&uart6 {
-	status = "okay";
-
-	pinctrl-0 = <&qup_uart6_4pin>;
-
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-	};
-};
-
-&uart9 {
-	label = "LS-UART1";
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_1_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l26a_1p2>;
-	vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l12a_1p8>;
-	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l26a_1p2>;
-	vdda-pll-supply = <&vreg_l1a_0p875>;
-};
-
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&vreg_l20a_2p95>;
-	vcc-max-microamp = <800000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vreg_l1a_0p875>;
-	vdda-pll-supply = <&vreg_l26a_1p2>;
-};
-
-&venus {
-	status = "okay";
-};
-
-&wcd9340 {
-	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
-	vdd-buck-supply = <&vreg_s4a_1p8>;
-	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
-	vdd-tx-supply = <&vreg_s4a_1p8>;
-	vdd-rx-supply = <&vreg_s4a_1p8>;
-	vdd-io-supply = <&vreg_s4a_1p8>;
-
-	swm: swm at c85 {
-		left_spkr: speaker at 0,1 {
-			compatible = "sdw10217201000";
-			reg = <0 1>;
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
-			#thermal-sensor-cells = <0>;
-			sound-name-prefix = "SpkrLeft";
-			#sound-dai-cells = <0>;
-		};
-
-		right_spkr: speaker at 0,2 {
-			compatible = "sdw10217201000";
-			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
-			reg = <0 2>;
-			#thermal-sensor-cells = <0>;
-			sound-name-prefix = "SpkrRight";
-			#sound-dai-cells = <0>;
-		};
-	};
-};
-
-&wifi {
-	status = "okay";
-
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-
-	qcom,snoc-host-cap-8bit-quirk;
-	qcom,ath10k-calibration-variant = "Thundercomm_DB845C";
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi2_default {
-	drive-strength = <16>;
-};
-
-&qup_i2c10_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_uart9_rx {
-	drive-strength = <2>;
-	bias-pull-up;
-};
-
-&qup_uart9_tx {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-&qup_spi0_default {
-	drive-strength = <6>;
-	bias-disable;
-};
diff --git a/arch/arm/dts/sdm845-samsung-starqltechn.dts b/arch/arm/dts/sdm845-samsung-starqltechn.dts
deleted file mode 100644
index d37a433130b9..000000000000
--- a/arch/arm/dts/sdm845-samsung-starqltechn.dts
+++ /dev/null
@@ -1,460 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
- *
- * Copyright (c) 2020, The Linux Foundation. All rights reserved.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/ {
-	chassis-type = "handset";
-	model = "Samsung Galaxy S9 SM-G9600";
-	compatible = "samsung,starqltechn", "qcom,sdm845";
-
-	chosen {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		framebuffer: framebuffer at 9d400000 {
-			compatible = "simple-framebuffer";
-			reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
-			width = <1440>;
-			height = <2960>;
-			stride = <(1440 * 4)>;
-			format = "a8r8g8b8";
-		};
-	};
-
-	vph_pwr: vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-	};
-
-	/*
-	 * Apparently RPMh does not provide support for PM8998 S4 because it
-	 * is always-on; model it as a fixed regulator.
-	 */
-	vreg_s4a_1p8: pm8998-smps4 {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_s4a_1p8";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&vph_pwr>;
-	};
-
-	reserved-memory {
-		memory at 9d400000 {
-			reg = <0x0 0x9d400000 0x0 0x02400000>;
-			no-map;
-		};
-
-		memory at a1300000 {
-			compatible = "ramoops";
-			reg = <0x0 0xa1300000 0x0 0x100000>;
-			record-size = <0x40000>;
-			console-size = <0x40000>;
-			ftrace-size = <0x40000>;
-			pmsg-size = <0x40000>;
-		};
-	};
-};
-
-
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-		vdd-s5-supply = <&vph_pwr>;
-		vdd-s6-supply = <&vph_pwr>;
-		vdd-s7-supply = <&vph_pwr>;
-		vdd-s8-supply = <&vph_pwr>;
-		vdd-s9-supply = <&vph_pwr>;
-		vdd-s10-supply = <&vph_pwr>;
-		vdd-s11-supply = <&vph_pwr>;
-		vdd-s12-supply = <&vph_pwr>;
-		vdd-s13-supply = <&vph_pwr>;
-		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
-		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
-		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
-		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
-		vdd-l6-supply = <&vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
-		vdd-l26-supply = <&vreg_s3a_1p35>;
-		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
-
-		vreg_s2a_1p125: smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		vreg_s3a_1p35: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		vreg_s5a_2p04: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		vreg_s7a_1p025: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vdd_qusb_hs0:
-		vdda_hp_pcie_core:
-		vdda_mipi_csi0_0p9:
-		vdda_mipi_csi1_0p9:
-		vdda_mipi_csi2_0p9:
-		vdda_mipi_dsi0_pll:
-		vdda_mipi_dsi1_pll:
-		vdda_qlink_lv:
-		vdda_qlink_lv_ck:
-		vdda_qrefs_0p875:
-		vdda_pcie_core:
-		vdda_pll_cc_ebi01:
-		vdda_pll_cc_ebi23:
-		vdda_sp_sensor:
-		vdda_ufs1_core:
-		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
-		vreg_l1a_0p875: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_10:
-		vreg_l2a_1p2: ldo2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l3a_1p0: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_wcss_cx:
-		vdd_wcss_mx:
-		vdda_wcss_pll:
-		vreg_l5a_0p8: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_13:
-		vreg_l6a_1p8: ldo6 {
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <1856000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7a_1p8: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8a_1p2: ldo8 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1248000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9a_1p8: ldo9 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10a_1p8: ldo10 {
-			regulator-min-microvolt = <1704000>;
-			regulator-max-microvolt = <2928000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l11a_1p0: ldo11 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1048000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_qfprom:
-		vdd_qfprom_sp:
-		vdda_apc1_cs_1p8:
-		vdda_gfx_cs_1p8:
-		vdda_qrefs_1p8:
-		vdda_qusb_hs0_1p8:
-		vddpx_11:
-		vreg_l12a_1p8: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_2:
-		vreg_l13a_2p95: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14a_1p88: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15a_1p8: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l16a_2p7: ldo16 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17a_1p3: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l18a_2p7: ldo18 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l19a_3p0: ldo19 {
-			regulator-min-microvolt = <2856000>;
-			regulator-max-microvolt = <3104000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l20a_2p95: ldo20 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l21a_2p95: ldo21 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l22a_2p85: ldo22 {
-			regulator-min-microvolt = <2864000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l23a_3p3: ldo23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_qusb_hs0_3p1:
-		vreg_l24a_3p075: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l25a_3p3: ldo25 {
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_hp_pcie_1p2:
-		vdda_hv_ebi0:
-		vdda_hv_ebi1:
-		vdda_hv_ebi2:
-		vdda_hv_ebi3:
-		vdda_mipi_csi_1p25:
-		vdda_mipi_dsi0_1p2:
-		vdda_mipi_dsi1_1p2:
-		vdda_pcie_1p2:
-		vdda_ufs1_1p2:
-		vdda_ufs2_1p2:
-		vdda_usb1_ss_1p2:
-		vdda_usb2_ss_1p2:
-		vreg_l26a_1p2: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l28a_3p0: ldo28 {
-			regulator-min-microvolt = <2856000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_lvs1a_1p8: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		vreg_lvs2a_1p8: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8005-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vph_pwr>;
-		vdd-s3-supply = <&vph_pwr>;
-		vdd-s4-supply = <&vph_pwr>;
-
-		vreg_s3c_0p6: smps3 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <600000>;
-		};
-	};
-};
-
-&gcc {
-	protected-clocks = <GCC_QSPI_CORE_CLK>,
-				<GCC_QSPI_CORE_CLK_SRC>,
-				<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-				<GCC_LPASS_Q6_AXI_CLK>,
-				<GCC_LPASS_SWAY_CLK>;
-};
-
-&i2c10 {
-	clock-frequency = <400000>;
-	status = "okay";
-};
-
-&qupv3_id_1 {
-	status = "okay";
-};
-
-&uart9 {
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-	vcc-supply = <&vreg_l20a_2p95>;
-	vcc-max-microamp = <600000>;
-	status = "okay";
-};
-
-&ufs_mem_phy {
-	vdda-phy-supply = <&vdda_ufs1_core>;
-	vdda-pll-supply = <&vdda_ufs1_1p2>;
-	status = "okay";
-};
-
-&sdhc_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
-	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&vreg_l21a_2p95>;
-	vqmmc-supply = <&vddpx_2>;
-	status = "okay";
-};
-
-&usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/* Until we have Type C hooked up we'll force this as peripheral. */
-	dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
-	vdd-supply = <&vdda_usb1_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-	status = "okay";
-};
-
-&usb_1_qmpphy {
-	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
-	vdda-pll-supply = <&vdda_usb1_ss_core>;
-	status = "okay";
-};
-
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
-&tlmm {
-	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
-
-	sdc2_clk_state: sdc2-clk-state {
-		pins = "sdc2_clk";
-		bias-disable;
-
-		/*
-		 * It seems that mmc_test reports errors if drive
-		 * strength is not 16 on clk, cmd, and data pins.
-		 */
-		drive-strength = <16>;
-	};
-
-	sdc2_cmd_state: sdc2-cmd-state {
-		pins = "sdc2_cmd";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_data_state: sdc2-data-state {
-		pins = "sdc2_data";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sd_card_det_n_state: sd-card-det-n-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm/dts/sdm845-wcd9340.dtsi b/arch/arm/dts/sdm845-wcd9340.dtsi
deleted file mode 100644
index c15d48860646..000000000000
--- a/arch/arm/dts/sdm845-wcd9340.dtsi
+++ /dev/null
@@ -1,86 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 SoC device tree source
- *
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-&slim {
-	status = "okay";
-
-	slim at 1 {
-		reg = <1>;
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		wcd9340_ifd: ifd at 0,0 {
-			compatible = "slim217,250";
-			reg = <0 0>;
-		};
-
-		wcd9340: codec at 1,0 {
-			compatible = "slim217,250";
-			reg = <1 0>;
-			slim-ifc-dev = <&wcd9340_ifd>;
-
-			#sound-dai-cells = <1>;
-
-			interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			clock-names = "extclk";
-			clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-
-			#clock-cells = <0>;
-			clock-frequency = <9600000>;
-			clock-output-names = "mclk";
-
-			pinctrl-0 = <&wcd_intr_default>;
-			pinctrl-names = "default";
-
-			qcom,micbias1-microvolt = <1800000>;
-			qcom,micbias2-microvolt = <1800000>;
-			qcom,micbias3-microvolt = <1800000>;
-			qcom,micbias4-microvolt = <1800000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			wcdgpio: gpio-controller at 42 {
-				compatible = "qcom,wcd9340-gpio";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x42 0x2>;
-			};
-
-			swm: swm at c85 {
-				compatible = "qcom,soundwire-v1.3.0";
-				reg = <0xc85 0x40>;
-				interrupts-extended = <&wcd9340 20>;
-
-				qcom,dout-ports = <6>;
-				qcom,din-ports = <2>;
-				qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
-				qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
-				qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
-
-				#sound-dai-cells = <1>;
-				clocks = <&wcd9340>;
-				clock-names = "iface";
-				#address-cells = <2>;
-				#size-cells = <0>;
-			};
-		};
-	};
-};
-
-&tlmm {
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		bias-pull-down;
-		drive-strength = <2>;
-	};
-};
diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
deleted file mode 100644
index bf5e6eb9d313..000000000000
--- a/arch/arm/dts/sdm845.dtsi
+++ /dev/null
@@ -1,5752 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * SDM845 SoC device tree source
- *
- * Copyright (c) 2018, The Linux Foundation. All rights reserved.
- */
-
-#include <dt-bindings/clock/qcom,camcc-sdm845.h>
-#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-#include <dt-bindings/clock/qcom,gcc-sdm845.h>
-#include <dt-bindings/clock/qcom,gpucc-sdm845.h>
-#include <dt-bindings/clock/qcom,lpass-sdm845.h>
-#include <dt-bindings/clock/qcom,rpmh.h>
-#include <dt-bindings/clock/qcom,videocc-sdm845.h>
-#include <dt-bindings/dma/qcom-gpi.h>
-#include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interconnect/qcom,osm-l3.h>
-#include <dt-bindings/interconnect/qcom,sdm845.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/phy/phy-qcom-qmp.h>
-#include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
-#include <dt-bindings/reset/qcom,sdm845-aoss.h>
-#include <dt-bindings/reset/qcom,sdm845-pdc.h>
-#include <dt-bindings/soc/qcom,apr.h>
-#include <dt-bindings/soc/qcom,rpmh-rsc.h>
-#include <dt-bindings/clock/qcom,gcc-sdm845.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
-	interrupt-parent = <&intc>;
-
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c2 = &i2c2;
-		i2c3 = &i2c3;
-		i2c4 = &i2c4;
-		i2c5 = &i2c5;
-		i2c6 = &i2c6;
-		i2c7 = &i2c7;
-		i2c8 = &i2c8;
-		i2c9 = &i2c9;
-		i2c10 = &i2c10;
-		i2c11 = &i2c11;
-		i2c12 = &i2c12;
-		i2c13 = &i2c13;
-		i2c14 = &i2c14;
-		i2c15 = &i2c15;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-		spi3 = &spi3;
-		spi4 = &spi4;
-		spi5 = &spi5;
-		spi6 = &spi6;
-		spi7 = &spi7;
-		spi8 = &spi8;
-		spi9 = &spi9;
-		spi10 = &spi10;
-		spi11 = &spi11;
-		spi12 = &spi12;
-		spi13 = &spi13;
-		spi14 = &spi14;
-		spi15 = &spi15;
-	};
-
-	chosen { };
-
-	clocks {
-		xo_board: xo-board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <38400000>;
-			clock-output-names = "xo_board";
-		};
-
-		sleep_clk: sleep-clk {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32764>;
-		};
-	};
-
-	cpus: cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu at 0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			clocks = <&cpufreq_hw 0>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <154>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD0>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-					compatible = "cache";
-					cache-level = <3>;
-					cache-unified;
-				};
-			};
-		};
-
-		CPU1: cpu at 100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			clocks = <&cpufreq_hw 0>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <154>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD1>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_100>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu at 200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			clocks = <&cpufreq_hw 0>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <154>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD2>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_200>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu at 300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			clocks = <&cpufreq_hw 0>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <611>;
-			dynamic-power-coefficient = <154>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			#cooling-cells = <2>;
-			power-domains = <&CPU_PD3>;
-			power-domain-names = "psci";
-			next-level-cache = <&L2_300>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu at 400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			clocks = <&cpufreq_hw 1>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <442>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD4>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_400>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu at 500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			clocks = <&cpufreq_hw 1>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <442>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD5>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_500>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu at 600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			clocks = <&cpufreq_hw 1>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <442>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD6>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_600>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu at 700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			clocks = <&cpufreq_hw 1>;
-			enable-method = "psci";
-			capacity-dmips-mhz = <1024>;
-			dynamic-power-coefficient = <442>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
-					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
-			power-domains = <&CPU_PD7>;
-			power-domain-names = "psci";
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_700>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				cache-level = <2>;
-				cache-unified;
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-
-				core2 {
-					cpu = <&CPU2>;
-				};
-
-				core3 {
-					cpu = <&CPU3>;
-				};
-
-				core4 {
-					cpu = <&CPU4>;
-				};
-
-				core5 {
-					cpu = <&CPU5>;
-				};
-
-				core6 {
-					cpu = <&CPU6>;
-				};
-
-				core7 {
-					cpu = <&CPU7>;
-				};
-			};
-		};
-
-		cpu_idle_states: idle-states {
-			entry-method = "psci";
-
-			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "little-rail-power-collapse";
-				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <350>;
-				exit-latency-us = <461>;
-				min-residency-us = <1890>;
-				local-timer-stop;
-			};
-
-			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
-				compatible = "arm,idle-state";
-				idle-state-name = "big-rail-power-collapse";
-				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <264>;
-				exit-latency-us = <621>;
-				min-residency-us = <952>;
-				local-timer-stop;
-			};
-		};
-
-		domain-idle-states {
-			CLUSTER_SLEEP_0: cluster-sleep-0 {
-				compatible = "domain-idle-state";
-				arm,psci-suspend-param = <0x4100c244>;
-				entry-latency-us = <3263>;
-				exit-latency-us = <6562>;
-				min-residency-us = <9987>;
-			};
-		};
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-sdm845", "qcom,scm";
-		};
-	};
-
-	memory at 80000000 {
-		device_type = "memory";
-		/* We expect the bootloader to fill in the size */
-		reg = <0 0x80000000 0 0>;
-	};
-
-	cpu0_opp_table: opp-table-cpu0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		cpu0_opp1: opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-peak-kBps = <800000 4800000>;
-		};
-
-		cpu0_opp2: opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-peak-kBps = <800000 4800000>;
-		};
-
-		cpu0_opp3: opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-peak-kBps = <800000 6451200>;
-		};
-
-		cpu0_opp4: opp-576000000 {
-			opp-hz = /bits/ 64 <576000000>;
-			opp-peak-kBps = <800000 6451200>;
-		};
-
-		cpu0_opp5: opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-peak-kBps = <800000 7680000>;
-		};
-
-		cpu0_opp6: opp-748800000 {
-			opp-hz = /bits/ 64 <748800000>;
-			opp-peak-kBps = <1804000 9216000>;
-		};
-
-		cpu0_opp7: opp-825600000 {
-			opp-hz = /bits/ 64 <825600000>;
-			opp-peak-kBps = <1804000 9216000>;
-		};
-
-		cpu0_opp8: opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-peak-kBps = <1804000 10444800>;
-		};
-
-		cpu0_opp9: opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-peak-kBps = <1804000 11980800>;
-		};
-
-		cpu0_opp10: opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-peak-kBps = <1804000 11980800>;
-		};
-
-		cpu0_opp11: opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-peak-kBps = <2188000 13516800>;
-		};
-
-		cpu0_opp12: opp-1228800000 {
-			opp-hz = /bits/ 64 <1228800000>;
-			opp-peak-kBps = <2188000 15052800>;
-		};
-
-		cpu0_opp13: opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-peak-kBps = <2188000 16588800>;
-		};
-
-		cpu0_opp14: opp-1420800000 {
-			opp-hz = /bits/ 64 <1420800000>;
-			opp-peak-kBps = <3072000 18124800>;
-		};
-
-		cpu0_opp15: opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-peak-kBps = <3072000 19353600>;
-		};
-
-		cpu0_opp16: opp-1612800000 {
-			opp-hz = /bits/ 64 <1612800000>;
-			opp-peak-kBps = <4068000 19353600>;
-		};
-
-		cpu0_opp17: opp-1689600000 {
-			opp-hz = /bits/ 64 <1689600000>;
-			opp-peak-kBps = <4068000 20889600>;
-		};
-
-		cpu0_opp18: opp-1766400000 {
-			opp-hz = /bits/ 64 <1766400000>;
-			opp-peak-kBps = <4068000 22425600>;
-		};
-	};
-
-	cpu4_opp_table: opp-table-cpu4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		cpu4_opp1: opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-peak-kBps = <800000 4800000>;
-		};
-
-		cpu4_opp2: opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-peak-kBps = <800000 4800000>;
-		};
-
-		cpu4_opp3: opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-peak-kBps = <1804000 4800000>;
-		};
-
-		cpu4_opp4: opp-576000000 {
-			opp-hz = /bits/ 64 <576000000>;
-			opp-peak-kBps = <1804000 4800000>;
-		};
-
-		cpu4_opp5: opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-peak-kBps = <1804000 4800000>;
-		};
-
-		cpu4_opp6: opp-748800000 {
-			opp-hz = /bits/ 64 <748800000>;
-			opp-peak-kBps = <1804000 4800000>;
-		};
-
-		cpu4_opp7: opp-825600000 {
-			opp-hz = /bits/ 64 <825600000>;
-			opp-peak-kBps = <2188000 9216000>;
-		};
-
-		cpu4_opp8: opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-peak-kBps = <2188000 9216000>;
-		};
-
-		cpu4_opp9: opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-peak-kBps = <2188000 9216000>;
-		};
-
-		cpu4_opp10: opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-peak-kBps = <3072000 9216000>;
-		};
-
-		cpu4_opp11: opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-peak-kBps = <3072000 11980800>;
-		};
-
-		cpu4_opp12: opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-peak-kBps = <4068000 11980800>;
-		};
-
-		cpu4_opp13: opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-peak-kBps = <4068000 11980800>;
-		};
-
-		cpu4_opp14: opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-peak-kBps = <4068000 15052800>;
-		};
-
-		cpu4_opp15: opp-1459200000 {
-			opp-hz = /bits/ 64 <1459200000>;
-			opp-peak-kBps = <4068000 15052800>;
-		};
-
-		cpu4_opp16: opp-1536000000 {
-			opp-hz = /bits/ 64 <1536000000>;
-			opp-peak-kBps = <5412000 15052800>;
-		};
-
-		cpu4_opp17: opp-1612800000 {
-			opp-hz = /bits/ 64 <1612800000>;
-			opp-peak-kBps = <5412000 15052800>;
-		};
-
-		cpu4_opp18: opp-1689600000 {
-			opp-hz = /bits/ 64 <1689600000>;
-			opp-peak-kBps = <5412000 19353600>;
-		};
-
-		cpu4_opp19: opp-1766400000 {
-			opp-hz = /bits/ 64 <1766400000>;
-			opp-peak-kBps = <6220000 19353600>;
-		};
-
-		cpu4_opp20: opp-1843200000 {
-			opp-hz = /bits/ 64 <1843200000>;
-			opp-peak-kBps = <6220000 19353600>;
-		};
-
-		cpu4_opp21: opp-1920000000 {
-			opp-hz = /bits/ 64 <1920000000>;
-			opp-peak-kBps = <7216000 19353600>;
-		};
-
-		cpu4_opp22: opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-peak-kBps = <7216000 20889600>;
-		};
-
-		cpu4_opp23: opp-2092800000 {
-			opp-hz = /bits/ 64 <2092800000>;
-			opp-peak-kBps = <7216000 20889600>;
-		};
-
-		cpu4_opp24: opp-2169600000 {
-			opp-hz = /bits/ 64 <2169600000>;
-			opp-peak-kBps = <7216000 20889600>;
-		};
-
-		cpu4_opp25: opp-2246400000 {
-			opp-hz = /bits/ 64 <2246400000>;
-			opp-peak-kBps = <7216000 20889600>;
-		};
-
-		cpu4_opp26: opp-2323200000 {
-			opp-hz = /bits/ 64 <2323200000>;
-			opp-peak-kBps = <7216000 20889600>;
-		};
-
-		cpu4_opp27: opp-2400000000 {
-			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <7216000 22425600>;
-		};
-
-		cpu4_opp28: opp-2476800000 {
-			opp-hz = /bits/ 64 <2476800000>;
-			opp-peak-kBps = <7216000 22425600>;
-		};
-
-		cpu4_opp29: opp-2553600000 {
-			opp-hz = /bits/ 64 <2553600000>;
-			opp-peak-kBps = <7216000 22425600>;
-		};
-
-		cpu4_opp30: opp-2649600000 {
-			opp-hz = /bits/ 64 <2649600000>;
-			opp-peak-kBps = <7216000 22425600>;
-		};
-
-		cpu4_opp31: opp-2745600000 {
-			opp-hz = /bits/ 64 <2745600000>;
-			opp-peak-kBps = <7216000 25497600>;
-		};
-
-		cpu4_opp32: opp-2803200000 {
-			opp-hz = /bits/ 64 <2803200000>;
-			opp-peak-kBps = <7216000 25497600>;
-		};
-	};
-
-	dsi_opp_table: opp-table-dsi {
-		compatible = "operating-points-v2";
-
-		opp-19200000 {
-			opp-hz = /bits/ 64 <19200000>;
-			required-opps = <&rpmhpd_opp_min_svs>;
-		};
-
-		opp-180000000 {
-			opp-hz = /bits/ 64 <180000000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-275000000 {
-			opp-hz = /bits/ 64 <275000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-328580000 {
-			opp-hz = /bits/ 64 <328580000>;
-			required-opps = <&rpmhpd_opp_svs_l1>;
-		};
-
-		opp-358000000 {
-			opp-hz = /bits/ 64 <358000000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-	};
-
-	qspi_opp_table: opp-table-qspi {
-		compatible = "operating-points-v2";
-
-		opp-19200000 {
-			opp-hz = /bits/ 64 <19200000>;
-			required-opps = <&rpmhpd_opp_min_svs>;
-		};
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-150000000 {
-			opp-hz = /bits/ 64 <150000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-	};
-
-	qup_opp_table: opp-table-qup {
-		compatible = "operating-points-v2";
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			required-opps = <&rpmhpd_opp_min_svs>;
-		};
-
-		opp-75000000 {
-			opp-hz = /bits/ 64 <75000000>;
-			required-opps = <&rpmhpd_opp_low_svs>;
-		};
-
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			required-opps = <&rpmhpd_opp_svs>;
-		};
-
-		opp-128000000 {
-			opp-hz = /bits/ 64 <128000000>;
-			required-opps = <&rpmhpd_opp_nom>;
-		};
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	psci: psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-
-		CPU_PD0: power-domain-cpu0 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
-		};
-
-		CPU_PD1: power-domain-cpu1 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
-		};
-
-		CPU_PD2: power-domain-cpu2 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
-		};
-
-		CPU_PD3: power-domain-cpu3 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
-		};
-
-		CPU_PD4: power-domain-cpu4 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
-		};
-
-		CPU_PD5: power-domain-cpu5 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
-		};
-
-		CPU_PD6: power-domain-cpu6 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
-		};
-
-		CPU_PD7: power-domain-cpu7 {
-			#power-domain-cells = <0>;
-			power-domains = <&CLUSTER_PD>;
-			domain-idle-states = <&BIG_CPU_SLEEP_0>;
-		};
-
-		CLUSTER_PD: power-domain-cluster {
-			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
-		};
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		hyp_mem: hyp-mem at 85700000 {
-			reg = <0 0x85700000 0 0x600000>;
-			no-map;
-		};
-
-		xbl_mem: xbl-mem at 85e00000 {
-			reg = <0 0x85e00000 0 0x100000>;
-			no-map;
-		};
-
-		aop_mem: aop-mem at 85fc0000 {
-			reg = <0 0x85fc0000 0 0x20000>;
-			no-map;
-		};
-
-		aop_cmd_db_mem: aop-cmd-db-mem at 85fe0000 {
-			compatible = "qcom,cmd-db";
-			reg = <0x0 0x85fe0000 0 0x20000>;
-			no-map;
-		};
-
-		smem at 86000000 {
-			compatible = "qcom,smem";
-			reg = <0x0 0x86000000 0 0x200000>;
-			no-map;
-			hwlocks = <&tcsr_mutex 3>;
-		};
-
-		tz_mem: tz at 86200000 {
-			reg = <0 0x86200000 0 0x2d00000>;
-			no-map;
-		};
-
-		rmtfs_mem: rmtfs at 88f00000 {
-			compatible = "qcom,rmtfs-mem";
-			reg = <0 0x88f00000 0 0x200000>;
-			no-map;
-
-			qcom,client-id = <1>;
-			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
-		};
-
-		qseecom_mem: qseecom at 8ab00000 {
-			reg = <0 0x8ab00000 0 0x1400000>;
-			no-map;
-		};
-
-		camera_mem: camera-mem at 8bf00000 {
-			reg = <0 0x8bf00000 0 0x500000>;
-			no-map;
-		};
-
-		ipa_fw_mem: ipa-fw at 8c400000 {
-			reg = <0 0x8c400000 0 0x10000>;
-			no-map;
-		};
-
-		ipa_gsi_mem: ipa-gsi at 8c410000 {
-			reg = <0 0x8c410000 0 0x5000>;
-			no-map;
-		};
-
-		gpu_mem: gpu at 8c415000 {
-			reg = <0 0x8c415000 0 0x2000>;
-			no-map;
-		};
-
-		adsp_mem: adsp at 8c500000 {
-			reg = <0 0x8c500000 0 0x1a00000>;
-			no-map;
-		};
-
-		wlan_msa_mem: wlan-msa at 8df00000 {
-			reg = <0 0x8df00000 0 0x100000>;
-			no-map;
-		};
-
-		mpss_region: mpss at 8e000000 {
-			reg = <0 0x8e000000 0 0x7800000>;
-			no-map;
-		};
-
-		venus_mem: venus at 95800000 {
-			reg = <0 0x95800000 0 0x500000>;
-			no-map;
-		};
-
-		cdsp_mem: cdsp at 95d00000 {
-			reg = <0 0x95d00000 0 0x800000>;
-			no-map;
-		};
-
-		mba_region: mba at 96500000 {
-			reg = <0 0x96500000 0 0x200000>;
-			no-map;
-		};
-
-		slpi_mem: slpi at 96700000 {
-			reg = <0 0x96700000 0 0x1400000>;
-			no-map;
-		};
-
-		spss_mem: spss at 97b00000 {
-			reg = <0 0x97b00000 0 0x100000>;
-			no-map;
-		};
-
-		mdata_mem: mpss-metadata {
-			alloc-ranges = <0 0xa0000000 0 0x20000000>;
-			size = <0 0x4000>;
-			no-map;
-		};
-
-		fastrpc_mem: fastrpc {
-			compatible = "shared-dma-pool";
-			alloc-ranges = <0x0 0x00000000 0x0 0xffffffff>;
-			alignment = <0x0 0x400000>;
-			size = <0x0 0x1000000>;
-			reusable;
-		};
-	};
-
-	adsp_pas: remoteproc-adsp {
-		compatible = "qcom,sdm845-adsp-pas";
-
-		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-				  "handover", "stop-ack";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>;
-		clock-names = "xo";
-
-		memory-region = <&adsp_mem>;
-
-		qcom,qmp = <&aoss_qmp>;
-
-		qcom,smem-states = <&adsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		status = "disabled";
-
-		glink-edge {
-			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-			label = "lpass";
-			qcom,remote-pid = <2>;
-			mboxes = <&apss_shared 8>;
-
-			apr {
-				compatible = "qcom,apr-v2";
-				qcom,glink-channels = "apr_audio_svc";
-				qcom,domain = <APR_DOMAIN_ADSP>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				qcom,intents = <512 20>;
-
-				service at 3 {
-					reg = <APR_SVC_ADSP_CORE>;
-					compatible = "qcom,q6core";
-					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-				};
-
-				q6afe: service at 4 {
-					compatible = "qcom,q6afe";
-					reg = <APR_SVC_AFE>;
-					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					q6afedai: dais {
-						compatible = "qcom,q6afe-dais";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#sound-dai-cells = <1>;
-					};
-				};
-
-				q6asm: service at 7 {
-					compatible = "qcom,q6asm";
-					reg = <APR_SVC_ASM>;
-					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					q6asmdai: dais {
-						compatible = "qcom,q6asm-dais";
-						#address-cells = <1>;
-						#size-cells = <0>;
-						#sound-dai-cells = <1>;
-						iommus = <&apps_smmu 0x1821 0x0>;
-					};
-				};
-
-				q6adm: service at 8 {
-					compatible = "qcom,q6adm";
-					reg = <APR_SVC_ADM>;
-					qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
-					q6routing: routing {
-						compatible = "qcom,q6adm-routing";
-						#sound-dai-cells = <0>;
-					};
-				};
-			};
-
-			fastrpc {
-				compatible = "qcom,fastrpc";
-				qcom,glink-channels = "fastrpcglink-apps-dsp";
-				label = "adsp";
-				qcom,non-secure-domain;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				compute-cb at 3 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <3>;
-					iommus = <&apps_smmu 0x1823 0x0>;
-				};
-
-				compute-cb at 4 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <4>;
-					iommus = <&apps_smmu 0x1824 0x0>;
-				};
-			};
-		};
-	};
-
-	cdsp_pas: remoteproc-cdsp {
-		compatible = "qcom,sdm845-cdsp-pas";
-
-		interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
-				      <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				      <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				      <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				      <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-		interrupt-names = "wdog", "fatal", "ready",
-				  "handover", "stop-ack";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>;
-		clock-names = "xo";
-
-		memory-region = <&cdsp_mem>;
-
-		qcom,qmp = <&aoss_qmp>;
-
-		qcom,smem-states = <&cdsp_smp2p_out 0>;
-		qcom,smem-state-names = "stop";
-
-		status = "disabled";
-
-		glink-edge {
-			interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
-			label = "turing";
-			qcom,remote-pid = <5>;
-			mboxes = <&apss_shared 4>;
-			fastrpc {
-				compatible = "qcom,fastrpc";
-				qcom,glink-channels = "fastrpcglink-apps-dsp";
-				label = "cdsp";
-				qcom,non-secure-domain;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				compute-cb at 1 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <1>;
-					iommus = <&apps_smmu 0x1401 0x30>;
-				};
-
-				compute-cb at 2 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <2>;
-					iommus = <&apps_smmu 0x1402 0x30>;
-				};
-
-				compute-cb at 3 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <3>;
-					iommus = <&apps_smmu 0x1403 0x30>;
-				};
-
-				compute-cb at 4 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <4>;
-					iommus = <&apps_smmu 0x1404 0x30>;
-				};
-
-				compute-cb at 5 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <5>;
-					iommus = <&apps_smmu 0x1405 0x30>;
-				};
-
-				compute-cb at 6 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <6>;
-					iommus = <&apps_smmu 0x1406 0x30>;
-				};
-
-				compute-cb at 7 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <7>;
-					iommus = <&apps_smmu 0x1407 0x30>;
-				};
-
-				compute-cb at 8 {
-					compatible = "qcom,fastrpc-compute-cb";
-					reg = <8>;
-					iommus = <&apps_smmu 0x1408 0x30>;
-				};
-			};
-		};
-	};
-
-	smp2p-cdsp {
-		compatible = "qcom,smp2p";
-		qcom,smem = <94>, <432>;
-
-		interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
-
-		mboxes = <&apss_shared 6>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <5>;
-
-		cdsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		cdsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-lpass {
-		compatible = "qcom,smp2p";
-		qcom,smem = <443>, <429>;
-
-		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
-
-		mboxes = <&apss_shared 10>;
-
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <2>;
-
-		adsp_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		adsp_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-mpss {
-		compatible = "qcom,smp2p";
-		qcom,smem = <435>, <428>;
-		interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apss_shared 14>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <1>;
-
-		modem_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		modem_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		ipa_smp2p_out: ipa-ap-to-modem {
-			qcom,entry-name = "ipa";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		ipa_smp2p_in: ipa-modem-to-ap {
-			qcom,entry-name = "ipa";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	smp2p-slpi {
-		compatible = "qcom,smp2p";
-		qcom,smem = <481>, <430>;
-		interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
-		mboxes = <&apss_shared 26>;
-		qcom,local-pid = <0>;
-		qcom,remote-pid = <3>;
-
-		slpi_smp2p_out: master-kernel {
-			qcom,entry-name = "master-kernel";
-			#qcom,smem-state-cells = <1>;
-		};
-
-		slpi_smp2p_in: slave-kernel {
-			qcom,entry-name = "slave-kernel";
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-	};
-
-	soc: soc at 0 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0 0 0 0 0x10 0>;
-		dma-ranges = <0 0 0 0 0x10 0>;
-		compatible = "simple-bus";
-
-		gcc: clock-controller at 100000 {
-			compatible = "qcom,gcc-sdm845";
-			reg = <0 0x00100000 0 0x1f0000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK_A>,
-				 <&sleep_clk>,
-				 <&pcie0_phy>,
-				 <&pcie1_phy>;
-			clock-names = "bi_tcxo",
-				      "bi_tcxo_ao",
-				      "sleep_clk",
-				      "pcie_0_pipe_clk",
-				      "pcie_1_pipe_clk";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			power-domains = <&rpmhpd SDM845_CX>;
-		};
-
-		qfprom at 784000 {
-			compatible = "qcom,sdm845-qfprom", "qcom,qfprom";
-			reg = <0 0x00784000 0 0x8ff>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			qusb2p_hstx_trim: hstx-trim-primary at 1eb {
-				reg = <0x1eb 0x1>;
-				bits = <1 4>;
-			};
-
-			qusb2s_hstx_trim: hstx-trim-secondary at 1eb {
-				reg = <0x1eb 0x2>;
-				bits = <6 4>;
-			};
-		};
-
-		rng: rng at 793000 {
-			compatible = "qcom,prng-ee";
-			reg = <0 0x00793000 0 0x1000>;
-			clocks = <&gcc GCC_PRNG_AHB_CLK>;
-			clock-names = "core";
-		};
-
-		gpi_dma0: dma-controller at 800000 {
-			#dma-cells = <3>;
-			compatible = "qcom,sdm845-gpi-dma";
-			reg = <0 0x00800000 0 0x60000>;
-			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
-			dma-channels = <13>;
-			dma-channel-mask = <0xfa>;
-			iommus = <&apps_smmu 0x0016 0x0>;
-			status = "disabled";
-		};
-
-		qupv3_id_0: geniqup at 8c0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0 0x008c0000 0 0x6000>;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
-				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
-			iommus = <&apps_smmu 0x3 0x0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>;
-			interconnect-names = "qup-core";
-			status = "disabled";
-
-			i2c0: i2c at 880000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00880000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c0_default>;
-				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi0: spi at 880000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00880000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi0_default>;
-				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart0: serial at 880000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00880000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart0_default>;
-				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c1: i2c at 884000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00884000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c1_default>;
-				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi1: spi at 884000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00884000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi1_default>;
-				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart1: serial at 884000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00884000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart1_default>;
-				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c2: i2c at 888000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00888000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c2_default>;
-				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi2: spi at 888000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00888000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi2_default>;
-				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart2: serial at 888000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00888000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart2_default>;
-				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c3: i2c at 88c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x0088c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c3_default>;
-				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi3: spi at 88c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x0088c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi3_default>;
-				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart3: serial at 88c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x0088c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart3_default>;
-				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c4: i2c at 890000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00890000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c4_default>;
-				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi4: spi at 890000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00890000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi4_default>;
-				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart4: serial at 890000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00890000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart4_default>;
-				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c5: i2c at 894000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00894000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c5_default>;
-				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi5: spi at 894000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00894000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi5_default>;
-				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart5: serial at 894000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00894000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart5_default>;
-				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c6: i2c at 898000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00898000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c6_default>;
-				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
-						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
-				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi6: spi at 898000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00898000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi6_default>;
-				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart6: serial at 898000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00898000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart6_default>;
-				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c7: i2c at 89c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x0089c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c7_default>;
-				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				status = "disabled";
-			};
-
-			spi7: spi at 89c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x0089c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi7_default>;
-				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
-				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart7: serial at 89c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x0089c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart7_default>;
-				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-		};
-
-		gpi_dma1: dma-controller at a00000 {
-			#dma-cells = <3>;
-			compatible = "qcom,sdm845-gpi-dma";
-			reg = <0 0x00a00000 0 0x60000>;
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
-			dma-channels = <13>;
-			dma-channel-mask = <0xfa>;
-			iommus = <&apps_smmu 0x06d6 0x0>;
-			status = "disabled";
-		};
-
-		qupv3_id_1: geniqup at ac0000 {
-			compatible = "qcom,geni-se-qup";
-			reg = <0 0x00ac0000 0 0x6000>;
-			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
-				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
-			iommus = <&apps_smmu 0x6c3 0x0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>;
-			interconnect-names = "qup-core";
-			status = "disabled";
-
-			i2c8: i2c at a80000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a80000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c8_default>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi8: spi at a80000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a80000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi8_default>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart8: serial at a80000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a80000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart8_default>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c9: i2c at a84000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a84000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c9_default>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi9: spi at a84000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a84000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi9_default>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart9: serial at a84000 {
-				compatible = "qcom,geni-debug-uart";
-				reg = <0 0x00a84000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart9_default>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c10: i2c at a88000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a88000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c10_default>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi10: spi at a88000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a88000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi10_default>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart10: serial at a88000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a88000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart10_default>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c11: i2c at a8c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a8c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c11_default>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi11: spi at a8c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a8c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi11_default>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart11: serial at a8c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a8c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart11_default>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c12: i2c at a90000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a90000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c12_default>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi12: spi at a90000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a90000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi12_default>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart12: serial at a90000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a90000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart12_default>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c13: i2c at a94000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a94000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c13_default>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi13: spi at a94000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a94000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi13_default>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart13: serial at a94000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a94000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart13_default>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c14: i2c at a98000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a98000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c14_default>;
-				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			spi14: spi at a98000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a98000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi14_default>;
-				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart14: serial at a98000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a98000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart14_default>;
-				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-
-			i2c15: i2c at a9c000 {
-				compatible = "qcom,geni-i2c";
-				reg = <0 0x00a9c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_i2c15_default>;
-				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				status = "disabled";
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
-						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
-				interconnect-names = "qup-core", "qup-config", "qup-memory";
-				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
-				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
-				dma-names = "tx", "rx";
-			};
-
-			spi15: spi at a9c000 {
-				compatible = "qcom,geni-spi";
-				reg = <0 0x00a9c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_spi15_default>;
-				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
-				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			uart15: serial at a9c000 {
-				compatible = "qcom,geni-uart";
-				reg = <0 0x00a9c000 0 0x4000>;
-				clock-names = "se";
-				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&qup_uart15_default>;
-				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&rpmhpd SDM845_CX>;
-				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
-						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
-				interconnect-names = "qup-core", "qup-config";
-				status = "disabled";
-			};
-		};
-
-		llcc: system-cache-controller at 1100000 {
-			compatible = "qcom,sdm845-llcc";
-			reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>,
-			      <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
-			      <0 0x01300000 0 0x50000>;
-			reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
-				    "llcc3_base", "llcc_broadcast_base";
-			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		dma at 10a2000 {
-			compatible = "qcom,sdm845-dcc", "qcom,dcc";
-			reg = <0x0 0x010a2000 0x0 0x1000>,
-			      <0x0 0x010ae000 0x0 0x2000>;
-		};
-
-		pmu at 114a000 {
-			compatible = "qcom,sdm845-llcc-bwmon";
-			reg = <0 0x0114a000 0 0x1000>;
-			interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&mem_noc MASTER_LLCC 3 &mem_noc SLAVE_EBI1 3>;
-
-			operating-points-v2 = <&llcc_bwmon_opp_table>;
-
-			llcc_bwmon_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/*
-				 * The interconnect path bandwidth taken from
-				 * cpu4_opp_table bandwidth for gladiator_noc-mem_noc
-				 * interconnect.  This also matches the
-				 * bandwidth table of qcom,llccbw (qcom,bw-tbl,
-				 * bus width: 4 bytes) from msm-4.9 downstream
-				 * kernel.
-				 */
-				opp-0 {
-					opp-peak-kBps = <800000>;
-				};
-				opp-1 {
-					opp-peak-kBps = <1804000>;
-				};
-				opp-2 {
-					opp-peak-kBps = <3072000>;
-				};
-				opp-3 {
-					opp-peak-kBps = <5412000>;
-				};
-				opp-4 {
-					opp-peak-kBps = <7216000>;
-				};
-			};
-		};
-
-		pmu at 1436400 {
-			compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
-			reg = <0 0x01436400 0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
-
-			operating-points-v2 = <&cpu_bwmon_opp_table>;
-
-			cpu_bwmon_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				/*
-				 * The interconnect path bandwidth taken from
-				 * cpu4_opp_table bandwidth for OSM L3
-				 * interconnect.  This also matches the OSM L3
-				 * from bandwidth table of qcom,cpu4-l3lat-mon
-				 * (qcom,core-dev-table, bus width: 16 bytes)
-				 * from msm-4.9 downstream kernel.
-				 */
-				opp-0 {
-					opp-peak-kBps = <4800000>;
-				};
-				opp-1 {
-					opp-peak-kBps = <9216000>;
-				};
-				opp-2 {
-					opp-peak-kBps = <15052800>;
-				};
-				opp-3 {
-					opp-peak-kBps = <20889600>;
-				};
-				opp-4 {
-					opp-peak-kBps = <25497600>;
-				};
-			};
-		};
-
-		pcie0: pci at 1c00000 {
-			compatible = "qcom,pcie-sdm845";
-			reg = <0 0x01c00000 0 0x2000>,
-			      <0 0x60000000 0 0xf1d>,
-			      <0 0x60000f20 0 0xa8>,
-			      <0 0x60100000 0 0x100000>,
-			      <0 0x01c07000 0 0x1000>;
-			reg-names = "parf", "dbi", "elbi", "config", "mhi";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xd00000>;
-
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
-				 <&gcc GCC_PCIE_0_AUX_CLK>,
-				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
-			clock-names = "pipe",
-				      "aux",
-				      "cfg",
-				      "bus_master",
-				      "bus_slave",
-				      "slave_q2a",
-				      "tbu";
-
-			iommu-map = <0x0   &apps_smmu 0x1c10 0x1>,
-				    <0x100 &apps_smmu 0x1c11 0x1>,
-				    <0x200 &apps_smmu 0x1c12 0x1>,
-				    <0x300 &apps_smmu 0x1c13 0x1>,
-				    <0x400 &apps_smmu 0x1c14 0x1>,
-				    <0x500 &apps_smmu 0x1c15 0x1>,
-				    <0x600 &apps_smmu 0x1c16 0x1>,
-				    <0x700 &apps_smmu 0x1c17 0x1>,
-				    <0x800 &apps_smmu 0x1c18 0x1>,
-				    <0x900 &apps_smmu 0x1c19 0x1>,
-				    <0xa00 &apps_smmu 0x1c1a 0x1>,
-				    <0xb00 &apps_smmu 0x1c1b 0x1>,
-				    <0xc00 &apps_smmu 0x1c1c 0x1>,
-				    <0xd00 &apps_smmu 0x1c1d 0x1>,
-				    <0xe00 &apps_smmu 0x1c1e 0x1>,
-				    <0xf00 &apps_smmu 0x1c1f 0x1>;
-
-			resets = <&gcc GCC_PCIE_0_BCR>;
-			reset-names = "pci";
-
-			power-domains = <&gcc PCIE_0_GDSC>;
-
-			phys = <&pcie0_phy>;
-			phy-names = "pciephy";
-
-			status = "disabled";
-		};
-
-		pcie0_phy: phy at 1c06000 {
-			compatible = "qcom,sdm845-qmp-pcie-phy";
-			reg = <0 0x01c06000 0 0x1000>;
-			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
-				 <&gcc GCC_PCIE_0_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
-				      "ref",
-				      "refgen",
-				      "pipe";
-
-			clock-output-names = "pcie_0_pipe_clk";
-			#clock-cells = <0>;
-
-			#phy-cells = <0>;
-
-			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-			reset-names = "phy";
-
-			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			status = "disabled";
-		};
-
-		pcie1: pci at 1c08000 {
-			compatible = "qcom,pcie-sdm845";
-			reg = <0 0x01c08000 0 0x2000>,
-			      <0 0x40000000 0 0xf1d>,
-			      <0 0x40000f20 0 0xa8>,
-			      <0 0x40100000 0 0x100000>,
-			      <0 0x01c0c000 0 0x1000>;
-			reg-names = "parf", "dbi", "elbi", "config", "mhi";
-			device_type = "pci";
-			linux,pci-domain = <1>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
-
-			interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
-				 <&gcc GCC_PCIE_1_AUX_CLK>,
-				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
-				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
-			clock-names = "pipe",
-				      "aux",
-				      "cfg",
-				      "bus_master",
-				      "bus_slave",
-				      "slave_q2a",
-				      "ref",
-				      "tbu";
-
-			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
-			assigned-clock-rates = <19200000>;
-
-			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
-				    <0x100 &apps_smmu 0x1c01 0x1>,
-				    <0x200 &apps_smmu 0x1c02 0x1>,
-				    <0x300 &apps_smmu 0x1c03 0x1>,
-				    <0x400 &apps_smmu 0x1c04 0x1>,
-				    <0x500 &apps_smmu 0x1c05 0x1>,
-				    <0x600 &apps_smmu 0x1c06 0x1>,
-				    <0x700 &apps_smmu 0x1c07 0x1>,
-				    <0x800 &apps_smmu 0x1c08 0x1>,
-				    <0x900 &apps_smmu 0x1c09 0x1>,
-				    <0xa00 &apps_smmu 0x1c0a 0x1>,
-				    <0xb00 &apps_smmu 0x1c0b 0x1>,
-				    <0xc00 &apps_smmu 0x1c0c 0x1>,
-				    <0xd00 &apps_smmu 0x1c0d 0x1>,
-				    <0xe00 &apps_smmu 0x1c0e 0x1>,
-				    <0xf00 &apps_smmu 0x1c0f 0x1>;
-
-			resets = <&gcc GCC_PCIE_1_BCR>;
-			reset-names = "pci";
-
-			power-domains = <&gcc PCIE_1_GDSC>;
-
-			phys = <&pcie1_phy>;
-			phy-names = "pciephy";
-
-			status = "disabled";
-		};
-
-		pcie1_phy: phy at 1c0a000 {
-			compatible = "qcom,sdm845-qhp-pcie-phy";
-			reg = <0 0x01c0a000 0 0x2000>;
-			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_PCIE_PHY_REFGEN_CLK>,
-				 <&gcc GCC_PCIE_1_PIPE_CLK>;
-			clock-names = "aux",
-				      "cfg_ahb",
-				      "ref",
-				      "refgen",
-				      "pipe";
-
-			clock-output-names = "pcie_1_pipe_clk";
-			#clock-cells = <0>;
-
-			#phy-cells = <0>;
-
-			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-			reset-names = "phy";
-
-			assigned-clocks = <&gcc GCC_PCIE_PHY_REFGEN_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			status = "disabled";
-		};
-
-		mem_noc: interconnect at 1380000 {
-			compatible = "qcom,sdm845-mem-noc";
-			reg = <0 0x01380000 0 0x27200>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		dc_noc: interconnect at 14e0000 {
-			compatible = "qcom,sdm845-dc-noc";
-			reg = <0 0x014e0000 0 0x400>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		config_noc: interconnect at 1500000 {
-			compatible = "qcom,sdm845-config-noc";
-			reg = <0 0x01500000 0 0x5080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		system_noc: interconnect at 1620000 {
-			compatible = "qcom,sdm845-system-noc";
-			reg = <0 0x01620000 0 0x18080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		aggre1_noc: interconnect at 16e0000 {
-			compatible = "qcom,sdm845-aggre1-noc";
-			reg = <0 0x016e0000 0 0x15080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		aggre2_noc: interconnect at 1700000 {
-			compatible = "qcom,sdm845-aggre2-noc";
-			reg = <0 0x01700000 0 0x1f300>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		mmss_noc: interconnect at 1740000 {
-			compatible = "qcom,sdm845-mmss-noc";
-			reg = <0 0x01740000 0 0x1c100>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		ufs_mem_hc: ufshc at 1d84000 {
-			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
-				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x2500>,
-			      <0 0x01d90000 0 0x8000>;
-			reg-names = "std", "ice";
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
-			phy-names = "ufsphy";
-			lanes-per-direction = <2>;
-			power-domains = <&gcc UFS_PHY_GDSC>;
-			#reset-cells = <1>;
-			resets = <&gcc GCC_UFS_PHY_BCR>;
-			reset-names = "rst";
-
-			iommus = <&apps_smmu 0x100 0xf>;
-
-			clock-names =
-				"core_clk",
-				"bus_aggr_clk",
-				"iface_clk",
-				"core_clk_unipro",
-				"ref_clk",
-				"tx_lane0_sync_clk",
-				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk",
-				"ice_core_clk";
-			clocks =
-				<&gcc GCC_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
-				<&gcc GCC_UFS_PHY_AHB_CLK>,
-				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
-				<&rpmhcc RPMH_CXO_CLK>,
-				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
-				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
-			freq-table-hz =
-				<50000000 200000000>,
-				<0 0>,
-				<0 0>,
-				<37500000 150000000>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
-
-			interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>,
-					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
-			interconnect-names = "ufs-ddr", "cpu-ufs";
-
-			status = "disabled";
-		};
-
-		ufs_mem_phy: phy at 1d87000 {
-			compatible = "qcom,sdm845-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x18c>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			clock-names = "ref",
-				      "ref_aux";
-			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
-				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-
-			resets = <&ufs_mem_hc 0>;
-			reset-names = "ufsphy";
-			status = "disabled";
-
-			ufs_mem_phy_lanes: phy at 1d87400 {
-				reg = <0 0x01d87400 0 0x108>,
-				      <0 0x01d87600 0 0x1e0>,
-				      <0 0x01d87c00 0 0x1dc>,
-				      <0 0x01d87800 0 0x108>,
-				      <0 0x01d87a00 0 0x1e0>;
-				#phy-cells = <0>;
-			};
-		};
-
-		cryptobam: dma-controller at 1dc4000 {
-			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
-			reg = <0 0x01dc4000 0 0x24000>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&rpmhcc RPMH_CE_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-			qcom,controlled-remotely;
-			iommus = <&apps_smmu 0x704 0x1>,
-				 <&apps_smmu 0x706 0x1>,
-				 <&apps_smmu 0x714 0x1>,
-				 <&apps_smmu 0x716 0x1>;
-		};
-
-		crypto: crypto at 1dfa000 {
-			compatible = "qcom,crypto-v5.4";
-			reg = <0 0x01dfa000 0 0x6000>;
-			clocks = <&gcc GCC_CE1_AHB_CLK>,
-				 <&gcc GCC_CE1_AXI_CLK>,
-				 <&rpmhcc RPMH_CE_CLK>;
-			clock-names = "iface", "bus", "core";
-			dmas = <&cryptobam 6>, <&cryptobam 7>;
-			dma-names = "rx", "tx";
-			iommus = <&apps_smmu 0x704 0x1>,
-				 <&apps_smmu 0x706 0x1>,
-				 <&apps_smmu 0x714 0x1>,
-				 <&apps_smmu 0x716 0x1>;
-		};
-
-		ipa: ipa at 1e40000 {
-			compatible = "qcom,sdm845-ipa";
-
-			iommus = <&apps_smmu 0x720 0x0>,
-				 <&apps_smmu 0x722 0x0>;
-			reg = <0 0x01e40000 0 0x7000>,
-			      <0 0x01e47000 0 0x2000>,
-			      <0 0x01e04000 0 0x2c000>;
-			reg-names = "ipa-reg",
-				    "ipa-shared",
-				    "gsi";
-
-			interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
-					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "ipa",
-					  "gsi",
-					  "ipa-clock-query",
-					  "ipa-setup-ready";
-
-			clocks = <&rpmhcc RPMH_IPA_CLK>;
-			clock-names = "core";
-
-			interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
-					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
-					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
-			interconnect-names = "memory",
-					     "imem",
-					     "config";
-
-			qcom,smem-states = <&ipa_smp2p_out 0>,
-					   <&ipa_smp2p_out 1>;
-			qcom,smem-state-names = "ipa-clock-enabled-valid",
-						"ipa-clock-enabled";
-
-			status = "disabled";
-		};
-
-		tcsr_mutex: hwlock at 1f40000 {
-			compatible = "qcom,tcsr-mutex";
-			reg = <0 0x01f40000 0 0x20000>;
-			#hwlock-cells = <1>;
-		};
-
-		tcsr_regs_1: syscon at 1f60000 {
-			compatible = "qcom,sdm845-tcsr", "syscon";
-			reg = <0 0x01f60000 0 0x20000>;
-		};
-
-		tlmm: pinctrl at 3400000 {
-			compatible = "qcom,sdm845-pinctrl";
-			reg = <0 0x03400000 0 0xc00000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			gpio-ranges = <&tlmm 0 0 151>;
-			wakeup-parent = <&pdc_intc>;
-
-			cci0_default: cci0-default-state {
-				/* SDA, SCL */
-				pins = "gpio17", "gpio18";
-				function = "cci_i2c";
-
-				bias-pull-up;
-				drive-strength = <2>; /* 2 mA */
-			};
-
-			cci0_sleep: cci0-sleep-state {
-				/* SDA, SCL */
-				pins = "gpio17", "gpio18";
-				function = "cci_i2c";
-
-				drive-strength = <2>; /* 2 mA */
-				bias-pull-down;
-			};
-
-			cci1_default: cci1-default-state {
-				/* SDA, SCL */
-				pins = "gpio19", "gpio20";
-				function = "cci_i2c";
-
-				bias-pull-up;
-				drive-strength = <2>; /* 2 mA */
-			};
-
-			cci1_sleep: cci1-sleep-state {
-				/* SDA, SCL */
-				pins = "gpio19", "gpio20";
-				function = "cci_i2c";
-
-				drive-strength = <2>; /* 2 mA */
-				bias-pull-down;
-			};
-
-			qspi_clk: qspi-clk-state {
-				pins = "gpio95";
-				function = "qspi_clk";
-			};
-
-			qspi_cs0: qspi-cs0-state {
-				pins = "gpio90";
-				function = "qspi_cs";
-			};
-
-			qspi_cs1: qspi-cs1-state {
-				pins = "gpio89";
-				function = "qspi_cs";
-			};
-
-			qspi_data0: qspi-data0-state {
-				pins = "gpio91";
-				function = "qspi_data";
-			};
-
-			qspi_data1: qspi-data1-state {
-				pins = "gpio92";
-				function = "qspi_data";
-			};
-
-			qspi_data23: qspi-data23-state {
-				pins = "gpio93", "gpio94";
-				function = "qspi_data";
-			};
-
-			qup_i2c0_default: qup-i2c0-default-state {
-				pins = "gpio0", "gpio1";
-				function = "qup0";
-			};
-
-			qup_i2c1_default: qup-i2c1-default-state {
-				pins = "gpio17", "gpio18";
-				function = "qup1";
-			};
-
-			qup_i2c2_default: qup-i2c2-default-state {
-				pins = "gpio27", "gpio28";
-				function = "qup2";
-			};
-
-			qup_i2c3_default: qup-i2c3-default-state {
-				pins = "gpio41", "gpio42";
-				function = "qup3";
-			};
-
-			qup_i2c4_default: qup-i2c4-default-state {
-				pins = "gpio89", "gpio90";
-				function = "qup4";
-			};
-
-			qup_i2c5_default: qup-i2c5-default-state {
-				pins = "gpio85", "gpio86";
-				function = "qup5";
-			};
-
-			qup_i2c6_default: qup-i2c6-default-state {
-				pins = "gpio45", "gpio46";
-				function = "qup6";
-			};
-
-			qup_i2c7_default: qup-i2c7-default-state {
-				pins = "gpio93", "gpio94";
-				function = "qup7";
-			};
-
-			qup_i2c8_default: qup-i2c8-default-state {
-				pins = "gpio65", "gpio66";
-				function = "qup8";
-			};
-
-			qup_i2c9_default: qup-i2c9-default-state {
-				pins = "gpio6", "gpio7";
-				function = "qup9";
-			};
-
-			qup_i2c10_default: qup-i2c10-default-state {
-				pins = "gpio55", "gpio56";
-				function = "qup10";
-			};
-
-			qup_i2c11_default: qup-i2c11-default-state {
-				pins = "gpio31", "gpio32";
-				function = "qup11";
-			};
-
-			qup_i2c12_default: qup-i2c12-default-state {
-				pins = "gpio49", "gpio50";
-				function = "qup12";
-			};
-
-			qup_i2c13_default: qup-i2c13-default-state {
-				pins = "gpio105", "gpio106";
-				function = "qup13";
-			};
-
-			qup_i2c14_default: qup-i2c14-default-state {
-				pins = "gpio33", "gpio34";
-				function = "qup14";
-			};
-
-			qup_i2c15_default: qup-i2c15-default-state {
-				pins = "gpio81", "gpio82";
-				function = "qup15";
-			};
-
-			qup_spi0_default: qup-spi0-default-state {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3";
-				function = "qup0";
-			};
-
-			qup_spi1_default: qup-spi1-default-state {
-				pins = "gpio17", "gpio18", "gpio19", "gpio20";
-				function = "qup1";
-			};
-
-			qup_spi2_default: qup-spi2-default-state {
-				pins = "gpio27", "gpio28", "gpio29", "gpio30";
-				function = "qup2";
-			};
-
-			qup_spi3_default: qup-spi3-default-state {
-				pins = "gpio41", "gpio42", "gpio43", "gpio44";
-				function = "qup3";
-			};
-
-			qup_spi4_default: qup-spi4-default-state {
-				pins = "gpio89", "gpio90", "gpio91", "gpio92";
-				function = "qup4";
-			};
-
-			qup_spi5_default: qup-spi5-default-state {
-				pins = "gpio85", "gpio86", "gpio87", "gpio88";
-				function = "qup5";
-			};
-
-			qup_spi6_default: qup-spi6-default-state {
-				pins = "gpio45", "gpio46", "gpio47", "gpio48";
-				function = "qup6";
-			};
-
-			qup_spi7_default: qup-spi7-default-state {
-				pins = "gpio93", "gpio94", "gpio95", "gpio96";
-				function = "qup7";
-			};
-
-			qup_spi8_default: qup-spi8-default-state {
-				pins = "gpio65", "gpio66", "gpio67", "gpio68";
-				function = "qup8";
-			};
-
-			qup_spi9_default: qup-spi9-default-state {
-				pins = "gpio6", "gpio7", "gpio4", "gpio5";
-				function = "qup9";
-			};
-
-			qup_spi10_default: qup-spi10-default-state {
-				pins = "gpio55", "gpio56", "gpio53", "gpio54";
-				function = "qup10";
-			};
-
-			qup_spi11_default: qup-spi11-default-state {
-				pins = "gpio31", "gpio32", "gpio33", "gpio34";
-				function = "qup11";
-			};
-
-			qup_spi12_default: qup-spi12-default-state {
-				pins = "gpio49", "gpio50", "gpio51", "gpio52";
-				function = "qup12";
-			};
-
-			qup_spi13_default: qup-spi13-default-state {
-				pins = "gpio105", "gpio106", "gpio107", "gpio108";
-				function = "qup13";
-			};
-
-			qup_spi14_default: qup-spi14-default-state {
-				pins = "gpio33", "gpio34", "gpio31", "gpio32";
-				function = "qup14";
-			};
-
-			qup_spi15_default: qup-spi15-default-state {
-				pins = "gpio81", "gpio82", "gpio83", "gpio84";
-				function = "qup15";
-			};
-
-			qup_uart0_default: qup-uart0-default-state {
-				qup_uart0_tx: tx-pins {
-					pins = "gpio2";
-					function = "qup0";
-				};
-
-				qup_uart0_rx: rx-pins {
-					pins = "gpio3";
-					function = "qup0";
-				};
-			};
-
-			qup_uart1_default: qup-uart1-default-state {
-				qup_uart1_tx: tx-pins {
-					pins = "gpio19";
-					function = "qup1";
-				};
-
-				qup_uart1_rx: rx-pins {
-					pins = "gpio20";
-					function = "qup1";
-				};
-			};
-
-			qup_uart2_default: qup-uart2-default-state {
-				qup_uart2_tx: tx-pins {
-					pins = "gpio29";
-					function = "qup2";
-				};
-
-				qup_uart2_rx: rx-pins {
-					pins = "gpio30";
-					function = "qup2";
-				};
-			};
-
-			qup_uart3_default: qup-uart3-default-state {
-				qup_uart3_tx: tx-pins {
-					pins = "gpio43";
-					function = "qup3";
-				};
-
-				qup_uart3_rx: rx-pins {
-					pins = "gpio44";
-					function = "qup3";
-				};
-			};
-
-			qup_uart3_4pin: qup-uart3-4pin-state {
-				qup_uart3_4pin_cts: cts-pins {
-					pins = "gpio41";
-					function = "qup3";
-				};
-
-				qup_uart3_4pin_rts_tx: rts-tx-pins {
-					pins = "gpio42", "gpio43";
-					function = "qup3";
-				};
-
-				qup_uart3_4pin_rx: rx-pins {
-					pins = "gpio44";
-					function = "qup3";
-				};
-			};
-
-			qup_uart4_default: qup-uart4-default-state {
-				qup_uart4_tx: tx-pins {
-					pins = "gpio91";
-					function = "qup4";
-				};
-
-				qup_uart4_rx: rx-pins {
-					pins = "gpio92";
-					function = "qup4";
-				};
-			};
-
-			qup_uart5_default: qup-uart5-default-state {
-				qup_uart5_tx: tx-pins {
-					pins = "gpio87";
-					function = "qup5";
-				};
-
-				qup_uart5_rx: rx-pins {
-					pins = "gpio88";
-					function = "qup5";
-				};
-			};
-
-			qup_uart6_default: qup-uart6-default-state {
-				qup_uart6_tx: tx-pins {
-					pins = "gpio47";
-					function = "qup6";
-				};
-
-				qup_uart6_rx: rx-pins {
-					pins = "gpio48";
-					function = "qup6";
-				};
-			};
-
-			qup_uart6_4pin: qup-uart6-4pin-state {
-				qup_uart6_4pin_cts: cts-pins {
-					pins = "gpio45";
-					function = "qup6";
-					bias-pull-down;
-				};
-
-				qup_uart6_4pin_rts_tx: rts-tx-pins {
-					pins = "gpio46", "gpio47";
-					function = "qup6";
-					drive-strength = <2>;
-					bias-disable;
-				};
-
-				qup_uart6_4pin_rx: rx-pins {
-					pins = "gpio48";
-					function = "qup6";
-					bias-pull-up;
-				};
-			};
-
-			qup_uart7_default: qup-uart7-default-state {
-				qup_uart7_tx: tx-pins {
-					pins = "gpio95";
-					function = "qup7";
-				};
-
-				qup_uart7_rx: rx-pins {
-					pins = "gpio96";
-					function = "qup7";
-				};
-			};
-
-			qup_uart8_default: qup-uart8-default-state {
-				qup_uart8_tx: tx-pins {
-					pins = "gpio67";
-					function = "qup8";
-				};
-
-				qup_uart8_rx: rx-pins {
-					pins = "gpio68";
-					function = "qup8";
-				};
-			};
-
-			qup_uart9_default: qup-uart9-default-state {
-				qup_uart9_tx: tx-pins {
-					pins = "gpio4";
-					function = "qup9";
-				};
-
-				qup_uart9_rx: rx-pins {
-					pins = "gpio5";
-					function = "qup9";
-				};
-			};
-
-			qup_uart10_default: qup-uart10-default-state {
-				qup_uart10_tx: tx-pins {
-					pins = "gpio53";
-					function = "qup10";
-				};
-
-				qup_uart10_rx: rx-pins {
-					pins = "gpio54";
-					function = "qup10";
-				};
-			};
-
-			qup_uart11_default: qup-uart11-default-state {
-				qup_uart11_tx: tx-pins {
-					pins = "gpio33";
-					function = "qup11";
-				};
-
-				qup_uart11_rx: rx-pins {
-					pins = "gpio34";
-					function = "qup11";
-				};
-			};
-
-			qup_uart12_default: qup-uart12-default-state {
-				qup_uart12_tx: tx-pins {
-					pins = "gpio51";
-					function = "qup0";
-				};
-
-				qup_uart12_rx: rx-pins {
-					pins = "gpio52";
-					function = "qup0";
-				};
-			};
-
-			qup_uart13_default: qup-uart13-default-state {
-				qup_uart13_tx: tx-pins {
-					pins = "gpio107";
-					function = "qup13";
-				};
-
-				qup_uart13_rx: rx-pins {
-					pins = "gpio108";
-					function = "qup13";
-				};
-			};
-
-			qup_uart14_default: qup-uart14-default-state {
-				qup_uart14_tx: tx-pins {
-					pins = "gpio31";
-					function = "qup14";
-				};
-
-				qup_uart14_rx: rx-pins {
-					pins = "gpio32";
-					function = "qup14";
-				};
-			};
-
-			qup_uart15_default: qup-uart15-default-state {
-				qup_uart15_tx: tx-pins {
-					pins = "gpio83";
-					function = "qup15";
-				};
-
-				qup_uart15_rx: rx-pins {
-					pins = "gpio84";
-					function = "qup15";
-				};
-			};
-
-			quat_mi2s_sleep: quat-mi2s-sleep-state {
-				pins = "gpio58", "gpio59";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			quat_mi2s_active: quat-mi2s-active-state {
-				pins = "gpio58", "gpio59";
-				function = "qua_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-				output-high;
-			};
-
-			quat_mi2s_sd0_sleep: quat-mi2s-sd0-sleep-state {
-				pins = "gpio60";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			quat_mi2s_sd0_active: quat-mi2s-sd0-active-state {
-				pins = "gpio60";
-				function = "qua_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			quat_mi2s_sd1_sleep: quat-mi2s-sd1-sleep-state {
-				pins = "gpio61";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			quat_mi2s_sd1_active: quat-mi2s-sd1-active-state {
-				pins = "gpio61";
-				function = "qua_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			quat_mi2s_sd2_sleep: quat-mi2s-sd2-sleep-state {
-				pins = "gpio62";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			quat_mi2s_sd2_active: quat-mi2s-sd2-active-state {
-				pins = "gpio62";
-				function = "qua_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-
-			quat_mi2s_sd3_sleep: quat-mi2s-sd3-sleep-state {
-				pins = "gpio63";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-pull-down;
-			};
-
-			quat_mi2s_sd3_active: quat-mi2s-sd3-active-state {
-				pins = "gpio63";
-				function = "qua_mi2s";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-
-		mss_pil: remoteproc at 4080000 {
-			compatible = "qcom,sdm845-mss-pil";
-			reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended =
-				<&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
-				<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-				<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-				<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-				<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-				<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-					  "handover", "stop-ack",
-					  "shutdown-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
-				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
-				 <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-				 <&gcc GCC_PRNG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "bus", "mem", "gpll0_mss",
-				      "snoc_axi", "mnoc_axi", "prng", "xo";
-
-			qcom,qmp = <&aoss_qmp>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
-				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
-			reset-names = "mss_restart", "pdc_reset";
-
-			qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
-
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>,
-					<&rpmhpd SDM845_MSS>;
-			power-domain-names = "cx", "mx", "mss";
-
-			status = "disabled";
-
-			mba {
-				memory-region = <&mba_region>;
-			};
-
-			mpss {
-				memory-region = <&mpss_region>;
-			};
-
-			metadata {
-				memory-region = <&mdata_mem>;
-			};
-
-			glink-edge {
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-				label = "modem";
-				qcom,remote-pid = <1>;
-				mboxes = <&apss_shared 12>;
-			};
-		};
-
-		gpucc: clock-controller at 5090000 {
-			compatible = "qcom,sdm845-gpucc";
-			reg = <0 0x05090000 0 0x9000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
-				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
-			clock-names = "bi_tcxo",
-				      "gcc_gpu_gpll0_clk_src",
-				      "gcc_gpu_gpll0_div_clk_src";
-		};
-
-		slpi_pas: remoteproc at 5c00000 {
-			compatible = "qcom,sdm845-slpi-pas";
-			reg = <0 0x5c00000 0 0x4000>;
-
-			interrupts-extended = <&intc GIC_SPI 494 IRQ_TYPE_EDGE_RISING>,
-						<&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-						<&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-						<&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-						<&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready",
-						"handover", "stop-ack";
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
-
-			qcom,qmp = <&aoss_qmp>;
-
-			power-domains = <&rpmhpd SDM845_CX>,
-					<&rpmhpd SDM845_MX>;
-			power-domain-names = "lcx", "lmx";
-
-			memory-region = <&slpi_mem>;
-
-			qcom,smem-states = <&slpi_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>;
-				label = "dsps";
-				qcom,remote-pid = <3>;
-				mboxes = <&apss_shared 24>;
-
-				fastrpc {
-					compatible = "qcom,fastrpc";
-					qcom,glink-channels = "fastrpcglink-apps-dsp";
-					label = "sdsp";
-					qcom,non-secure-domain;
-					qcom,vmids = <QCOM_SCM_VMID_HLOS QCOM_SCM_VMID_MSS_MSA
-						      QCOM_SCM_VMID_SSC_Q6 QCOM_SCM_VMID_ADSP_Q6>;
-					memory-region = <&fastrpc_mem>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					compute-cb at 0 {
-						compatible = "qcom,fastrpc-compute-cb";
-						reg = <0>;
-					};
-				};
-			};
-		};
-
-		stm at 6002000 {
-			compatible = "arm,coresight-stm", "arm,primecell";
-			reg = <0 0x06002000 0 0x1000>,
-			      <0 0x16280000 0 0x180000>;
-			reg-names = "stm-base", "stm-stimulus-base";
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					stm_out: endpoint {
-						remote-endpoint =
-						  <&funnel0_in7>;
-					};
-				};
-			};
-		};
-
-		funnel at 6041000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0 0x06041000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					funnel0_out: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_in0>;
-					};
-				};
-			};
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 7 {
-					reg = <7>;
-					funnel0_in7: endpoint {
-						remote-endpoint = <&stm_out>;
-					};
-				};
-			};
-		};
-
-		funnel at 6043000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0 0x06043000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					funnel2_out: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_in2>;
-					};
-				};
-			};
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 5 {
-					reg = <5>;
-					funnel2_in5: endpoint {
-						remote-endpoint =
-						  <&apss_merge_funnel_out>;
-					};
-				};
-			};
-		};
-
-		funnel at 6045000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0 0x06045000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					merge_funnel_out: endpoint {
-						remote-endpoint = <&etf_in>;
-					};
-				};
-			};
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					merge_funnel_in0: endpoint {
-						remote-endpoint =
-						  <&funnel0_out>;
-					};
-				};
-
-				port at 2 {
-					reg = <2>;
-					merge_funnel_in2: endpoint {
-						remote-endpoint =
-						  <&funnel2_out>;
-					};
-				};
-			};
-		};
-
-		replicator at 6046000 {
-			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0 0x06046000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					replicator_out: endpoint {
-						remote-endpoint = <&etr_in>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					replicator_in: endpoint {
-						remote-endpoint = <&etf_out>;
-					};
-				};
-			};
-		};
-
-		etf at 6047000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0 0x06047000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					etf_out: endpoint {
-						remote-endpoint =
-						  <&replicator_in>;
-					};
-				};
-			};
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 1 {
-					reg = <1>;
-					etf_in: endpoint {
-						remote-endpoint =
-						  <&merge_funnel_out>;
-					};
-				};
-			};
-		};
-
-		etr at 6048000 {
-			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0 0x06048000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,scatter-gather;
-
-			in-ports {
-				port {
-					etr_in: endpoint {
-						remote-endpoint =
-						  <&replicator_out>;
-					};
-				};
-			};
-		};
-
-		etm at 7040000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07040000 0 0x1000>;
-
-			cpu = <&CPU0>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm0_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in0>;
-					};
-				};
-			};
-		};
-
-		etm at 7140000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07140000 0 0x1000>;
-
-			cpu = <&CPU1>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm1_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in1>;
-					};
-				};
-			};
-		};
-
-		etm at 7240000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07240000 0 0x1000>;
-
-			cpu = <&CPU2>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm2_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in2>;
-					};
-				};
-			};
-		};
-
-		etm at 7340000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07340000 0 0x1000>;
-
-			cpu = <&CPU3>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm3_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in3>;
-					};
-				};
-			};
-		};
-
-		etm at 7440000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07440000 0 0x1000>;
-
-			cpu = <&CPU4>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm4_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in4>;
-					};
-				};
-			};
-		};
-
-		etm at 7540000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07540000 0 0x1000>;
-
-			cpu = <&CPU5>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm5_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in5>;
-					};
-				};
-			};
-		};
-
-		etm at 7640000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07640000 0 0x1000>;
-
-			cpu = <&CPU6>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm6_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in6>;
-					};
-				};
-			};
-		};
-
-		etm at 7740000 {
-			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0 0x07740000 0 0x1000>;
-
-			cpu = <&CPU7>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-			arm,coresight-loses-context-with-cpu;
-
-			out-ports {
-				port {
-					etm7_out: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_in7>;
-					};
-				};
-			};
-		};
-
-		funnel at 7800000 { /* APSS Funnel */
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0 0x07800000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					apss_funnel_out: endpoint {
-						remote-endpoint =
-						  <&apss_merge_funnel_in>;
-					};
-				};
-			};
-
-			in-ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-					apss_funnel_in0: endpoint {
-						remote-endpoint =
-						  <&etm0_out>;
-					};
-				};
-
-				port at 1 {
-					reg = <1>;
-					apss_funnel_in1: endpoint {
-						remote-endpoint =
-						  <&etm1_out>;
-					};
-				};
-
-				port at 2 {
-					reg = <2>;
-					apss_funnel_in2: endpoint {
-						remote-endpoint =
-						  <&etm2_out>;
-					};
-				};
-
-				port at 3 {
-					reg = <3>;
-					apss_funnel_in3: endpoint {
-						remote-endpoint =
-						  <&etm3_out>;
-					};
-				};
-
-				port at 4 {
-					reg = <4>;
-					apss_funnel_in4: endpoint {
-						remote-endpoint =
-						  <&etm4_out>;
-					};
-				};
-
-				port at 5 {
-					reg = <5>;
-					apss_funnel_in5: endpoint {
-						remote-endpoint =
-						  <&etm5_out>;
-					};
-				};
-
-				port at 6 {
-					reg = <6>;
-					apss_funnel_in6: endpoint {
-						remote-endpoint =
-						  <&etm6_out>;
-					};
-				};
-
-				port at 7 {
-					reg = <7>;
-					apss_funnel_in7: endpoint {
-						remote-endpoint =
-						  <&etm7_out>;
-					};
-				};
-			};
-		};
-
-		funnel at 7810000 {
-			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0 0x07810000 0 0x1000>;
-
-			clocks = <&aoss_qmp>;
-			clock-names = "apb_pclk";
-
-			out-ports {
-				port {
-					apss_merge_funnel_out: endpoint {
-						remote-endpoint =
-						  <&funnel2_in5>;
-					};
-				};
-			};
-
-			in-ports {
-				port {
-					apss_merge_funnel_in: endpoint {
-						remote-endpoint =
-						  <&apss_funnel_out>;
-					};
-				};
-			};
-		};
-
-		sdhc_2: mmc at 8804000 {
-			compatible = "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0 0x08804000 0 0x1000>;
-
-			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hc_irq", "pwr_irq";
-
-			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
-				 <&gcc GCC_SDCC2_APPS_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "core", "xo";
-			iommus = <&apps_smmu 0xa0 0xf>;
-			power-domains = <&rpmhpd SDM845_CX>;
-			operating-points-v2 = <&sdhc2_opp_table>;
-
-			status = "disabled";
-
-			sdhc2_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-9600000 {
-					opp-hz = /bits/ 64 <9600000>;
-					required-opps = <&rpmhpd_opp_min_svs>;
-				};
-
-				opp-19200000 {
-					opp-hz = /bits/ 64 <19200000>;
-					required-opps = <&rpmhpd_opp_low_svs>;
-				};
-
-				opp-100000000 {
-					opp-hz = /bits/ 64 <100000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-201500000 {
-					opp-hz = /bits/ 64 <201500000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-			};
-		};
-
-		qspi: spi at 88df000 {
-			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
-			reg = <0 0x088df000 0 0x600>;
-			iommus = <&apps_smmu 0x160 0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
-				 <&gcc GCC_QSPI_CORE_CLK>;
-			clock-names = "iface", "core";
-			power-domains = <&rpmhpd SDM845_CX>;
-			operating-points-v2 = <&qspi_opp_table>;
-			status = "disabled";
-		};
-
-		slim: slim-ngd at 171c0000 {
-			compatible = "qcom,slim-ngd-v2.1.0";
-			reg = <0 0x171c0000 0 0x2c000>;
-			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
-
-			dmas = <&slimbam 3>, <&slimbam 4>;
-			dma-names = "rx", "tx";
-
-			iommus = <&apps_smmu 0x1806 0x0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		lmh_cluster1: lmh at 17d70800 {
-			compatible = "qcom,sdm845-lmh";
-			reg = <0 0x17d70800 0 0x400>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU4>;
-			qcom,lmh-temp-arm-millicelsius = <65000>;
-			qcom,lmh-temp-low-millicelsius = <94500>;
-			qcom,lmh-temp-high-millicelsius = <95000>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		lmh_cluster0: lmh at 17d78800 {
-			compatible = "qcom,sdm845-lmh";
-			reg = <0 0x17d78800 0 0x400>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			cpus = <&CPU0>;
-			qcom,lmh-temp-arm-millicelsius = <65000>;
-			qcom,lmh-temp-low-millicelsius = <94500>;
-			qcom,lmh-temp-high-millicelsius = <95000>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		usb_1_hsphy: phy at 88e2000 {
-			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
-			reg = <0 0x088e2000 0 0x400>;
-			status = "disabled";
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			nvmem-cells = <&qusb2p_hstx_trim>;
-		};
-
-		usb_2_hsphy: phy at 88e3000 {
-			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
-			reg = <0 0x088e3000 0 0x400>;
-			status = "disabled";
-			#phy-cells = <0>;
-
-			clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "cfg_ahb", "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
-
-			nvmem-cells = <&qusb2s_hstx_trim>;
-		};
-
-		usb_1_qmpphy: phy at 88e8000 {
-			compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
-			status = "disabled";
-
-			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-			clock-names = "aux",
-				      "ref",
-				      "com_aux",
-				      "usb3_pipe",
-				      "cfg_ahb";
-
-			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
-			reset-names = "phy", "common";
-
-			#clock-cells = <1>;
-			#phy-cells = <1>;
-		};
-
-		usb_2_qmpphy: phy at 88eb000 {
-			compatible = "qcom,sdm845-qmp-usb3-uni-phy";
-			reg = <0 0x088eb000 0 0x18c>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
-				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_SEC_CLKREF_CLK>,
-				 <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-			resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
-				 <&gcc GCC_USB3_PHY_SEC_BCR>;
-			reset-names = "phy", "common";
-
-			usb_2_ssphy: phy at 88eb200 {
-				reg = <0 0x088eb200 0 0x128>,
-				      <0 0x088eb400 0 0x1fc>,
-				      <0 0x088eb800 0 0x218>,
-				      <0 0x088eb600 0 0x70>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_uni_phy_pipe_clk_src";
-			};
-		};
-
-		usb_1: usb at a6f8800 {
-			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
-
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
-
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-
-			interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
-					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			usb_1_dwc3: usb at a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x740 0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usb_2: usb at a8f8800 {
-			compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
-			reg = <0 0x0a8f8800 0 0x400>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
-				 <&gcc GCC_USB30_SEC_SLEEP_CLK>,
-				 <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi";
-
-			assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <150000000>;
-
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-					  "dm_hs_phy_irq", "dp_hs_phy_irq";
-
-			power-domains = <&gcc USB30_SEC_GDSC>;
-
-			resets = <&gcc GCC_USB30_SEC_BCR>;
-
-			interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
-					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
-			interconnect-names = "usb-ddr", "apps-usb";
-
-			usb_2_dwc3: usb at a800000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a800000 0 0xcd00>;
-				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x760 0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		venus: video-codec at aa00000 {
-			compatible = "qcom,sdm845-venus-v2";
-			reg = <0 0x0aa00000 0 0xff000>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>,
-					<&videocc VCODEC1_GDSC>,
-					<&rpmhpd SDM845_CX>;
-			power-domain-names = "venus", "vcodec0", "vcodec1", "cx";
-			operating-points-v2 = <&venus_opp_table>;
-			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
-				 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-				 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-			clock-names = "core", "iface", "bus",
-				      "vcodec0_core", "vcodec0_bus",
-				      "vcodec1_core", "vcodec1_bus";
-			iommus = <&apps_smmu 0x10a0 0x8>,
-				 <&apps_smmu 0x10b0 0x0>;
-			memory-region = <&venus_mem>;
-			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mem_noc SLAVE_EBI1 0>,
-					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
-			interconnect-names = "video-mem", "cpu-cfg";
-
-			status = "disabled";
-
-			video-core0 {
-				compatible = "venus-decoder";
-			};
-
-			video-core1 {
-				compatible = "venus-encoder";
-			};
-
-			venus_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-100000000 {
-					opp-hz = /bits/ 64 <100000000>;
-					required-opps = <&rpmhpd_opp_min_svs>;
-				};
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					required-opps = <&rpmhpd_opp_low_svs>;
-				};
-
-				opp-320000000 {
-					opp-hz = /bits/ 64 <320000000>;
-					required-opps = <&rpmhpd_opp_svs>;
-				};
-
-				opp-380000000 {
-					opp-hz = /bits/ 64 <380000000>;
-					required-opps = <&rpmhpd_opp_svs_l1>;
-				};
-
-				opp-444000000 {
-					opp-hz = /bits/ 64 <444000000>;
-					required-opps = <&rpmhpd_opp_nom>;
-				};
-
-				opp-533000097 {
-					opp-hz = /bits/ 64 <533000097>;
-					required-opps = <&rpmhpd_opp_turbo>;
-				};
-			};
-		};
-
-		videocc: clock-controller at ab00000 {
-			compatible = "qcom,sdm845-videocc";
-			reg = <0 0x0ab00000 0 0x10000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "bi_tcxo";
-			#clock-cells = <1>;
-			#power-domain-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		camss: camss at acb3000 {
-			compatible = "qcom,sdm845-camss";
-
-			reg = <0 0x0acb3000 0 0x1000>,
-				<0 0x0acba000 0 0x1000>,
-				<0 0x0acc8000 0 0x1000>,
-				<0 0x0ac65000 0 0x1000>,
-				<0 0x0ac66000 0 0x1000>,
-				<0 0x0ac67000 0 0x1000>,
-				<0 0x0ac68000 0 0x1000>,
-				<0 0x0acaf000 0 0x4000>,
-				<0 0x0acb6000 0 0x4000>,
-				<0 0x0acc4000 0 0x4000>;
-			reg-names = "csid0",
-				"csid1",
-				"csid2",
-				"csiphy0",
-				"csiphy1",
-				"csiphy2",
-				"csiphy3",
-				"vfe0",
-				"vfe1",
-				"vfe_lite";
-
-			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "csid0",
-				"csid1",
-				"csid2",
-				"csiphy0",
-				"csiphy1",
-				"csiphy2",
-				"csiphy3",
-				"vfe0",
-				"vfe1",
-				"vfe_lite";
-
-			power-domains = <&clock_camcc IFE_0_GDSC>,
-				<&clock_camcc IFE_1_GDSC>,
-				<&clock_camcc TITAN_TOP_GDSC>;
-
-			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
-				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
-				<&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
-				<&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
-				<&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
-				<&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
-				<&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
-				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
-				<&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
-				<&clock_camcc CAM_CC_CSIPHY0_CLK>,
-				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
-				<&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
-				<&clock_camcc CAM_CC_CSIPHY1_CLK>,
-				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
-				<&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
-				<&clock_camcc CAM_CC_CSIPHY2_CLK>,
-				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
-				<&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
-				<&clock_camcc CAM_CC_CSIPHY3_CLK>,
-				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
-				<&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
-				<&gcc GCC_CAMERA_AHB_CLK>,
-				<&gcc GCC_CAMERA_AXI_CLK>,
-				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
-				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
-				<&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
-				<&clock_camcc CAM_CC_IFE_0_CLK>,
-				<&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
-				<&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
-				<&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
-				<&clock_camcc CAM_CC_IFE_1_CLK>,
-				<&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
-				<&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
-				<&clock_camcc CAM_CC_IFE_LITE_CLK>,
-				<&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
-				<&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
-			clock-names = "camnoc_axi",
-				"cpas_ahb",
-				"cphy_rx_src",
-				"csi0",
-				"csi0_src",
-				"csi1",
-				"csi1_src",
-				"csi2",
-				"csi2_src",
-				"csiphy0",
-				"csiphy0_timer",
-				"csiphy0_timer_src",
-				"csiphy1",
-				"csiphy1_timer",
-				"csiphy1_timer_src",
-				"csiphy2",
-				"csiphy2_timer",
-				"csiphy2_timer_src",
-				"csiphy3",
-				"csiphy3_timer",
-				"csiphy3_timer_src",
-				"gcc_camera_ahb",
-				"gcc_camera_axi",
-				"slow_ahb_src",
-				"soc_ahb",
-				"vfe0_axi",
-				"vfe0",
-				"vfe0_cphy_rx",
-				"vfe0_src",
-				"vfe1_axi",
-				"vfe1",
-				"vfe1_cphy_rx",
-				"vfe1_src",
-				"vfe_lite",
-				"vfe_lite_cphy_rx",
-				"vfe_lite_src";
-
-			iommus = <&apps_smmu 0x0808 0x0>,
-				 <&apps_smmu 0x0810 0x8>,
-				 <&apps_smmu 0x0c08 0x0>,
-				 <&apps_smmu 0x0c10 0x8>;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port at 0 {
-					reg = <0>;
-				};
-
-				port at 1 {
-					reg = <1>;
-				};
-
-				port at 2 {
-					reg = <2>;
-				};
-
-				port at 3 {
-					reg = <3>;
-				};
-			};
-		};
-
-		cci: cci at ac4a000 {
-			compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			reg = <0 0x0ac4a000 0 0x4000>;
-			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
-			power-domains = <&clock_camcc TITAN_TOP_GDSC>;
-
-			clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
-				<&clock_camcc CAM_CC_SOC_AHB_CLK>,
-				<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
-				<&clock_camcc CAM_CC_CPAS_AHB_CLK>,
-				<&clock_camcc CAM_CC_CCI_CLK>,
-				<&clock_camcc CAM_CC_CCI_CLK_SRC>;
-			clock-names = "camnoc_axi",
-				"soc_ahb",
-				"slow_ahb_src",
-				"cpas_ahb",
-				"cci",
-				"cci_src";
-
-			assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
-				<&clock_camcc CAM_CC_CCI_CLK>;
-			assigned-clock-rates = <80000000>, <37500000>;
-
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&cci0_default &cci1_default>;
-			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
-
-			status = "disabled";
-
-			cci_i2c0: i2c-bus at 0 {
-				reg = <0>;
-				clock-frequency = <1000000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			cci_i2c1: i2c-bus at 1 {
-				reg = <1>;
-				clock-frequency = <1000000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		clock_camcc: clock-controller at ad00000 {
-			compatible = "qcom,sdm845-camcc";
-			reg = <0 0x0ad00000 0 0x10000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "bi_tcxo";
-		};
-
-		mdss: display-subsystem at ae00000 {
-			compatible = "qcom,sdm845-mdss";
-			reg = <0 0x0ae00000 0 0x1000>;
-			reg-names = "mdss";
-
-			power-domains = <&dispcc MDSS_GDSC>;
-
-			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			clock-names = "iface", "core";
-
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interconnects = <&mmss_noc MASTER_MDP0 0 &mem_noc SLAVE_EBI1 0>,
-					<&mmss_noc MASTER_MDP1 0 &mem_noc SLAVE_EBI1 0>;
-			interconnect-names = "mdp0-mem", "mdp1-mem";
-
-			iommus = <&apps_smmu 0x880 0x8>,
-			         <&apps_smmu 0xc80 0x8>;
-
-			status = "disabled";
-
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			mdss_mdp: display-controller at ae01000 {
-				compatible = "qcom,sdm845-dpu";
-				reg = <0 0x0ae01000 0 0x8f000>,
-				      <0 0x0aeb0000 0 0x2008>;
-				reg-names = "mdp", "vbif";
-
-				clocks = <&gcc GCC_DISP_AXI_CLK>,
-					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
-					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
-					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
-
-				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <19200000>;
-				operating-points-v2 = <&mdp_opp_table>;
-				power-domains = <&rpmhpd SDM845_CX>;
-
-				interrupt-parent = <&mdss>;
-				interrupts = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						dpu_intf0_out: endpoint {
-							remote-endpoint = <&dp_in>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						dpu_intf1_out: endpoint {
-							remote-endpoint = <&mdss_dsi0_in>;
-						};
-					};
-
-					port at 2 {
-						reg = <2>;
-						dpu_intf2_out: endpoint {
-							remote-endpoint = <&mdss_dsi1_in>;
-						};
-					};
-				};
-
-				mdp_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-19200000 {
-						opp-hz = /bits/ 64 <19200000>;
-						required-opps = <&rpmhpd_opp_min_svs>;
-					};
-
-					opp-171428571 {
-						opp-hz = /bits/ 64 <171428571>;
-						required-opps = <&rpmhpd_opp_low_svs>;
-					};
-
-					opp-344000000 {
-						opp-hz = /bits/ 64 <344000000>;
-						required-opps = <&rpmhpd_opp_svs_l1>;
-					};
-
-					opp-430000000 {
-						opp-hz = /bits/ 64 <430000000>;
-						required-opps = <&rpmhpd_opp_nom>;
-					};
-				};
-			};
-
-			mdss_dp: displayport-controller at ae90000 {
-				status = "disabled";
-				compatible = "qcom,sdm845-dp";
-
-				reg = <0 0x0ae90000 0 0x200>,
-				      <0 0x0ae90200 0 0x200>,
-				      <0 0x0ae90400 0 0x600>,
-				      <0 0x0ae90a00 0 0x600>,
-				      <0 0x0ae91000 0 0x600>;
-
-				interrupt-parent = <&mdss>;
-				interrupts = <12>;
-
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
-				clock-names = "core_iface", "core_aux", "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
-				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
-				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
-				phy-names = "dp";
-
-				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SDM845_CX>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					port at 0 {
-						reg = <0>;
-						dp_in: endpoint {
-							remote-endpoint = <&dpu_intf0_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						dp_out: endpoint { };
-					};
-				};
-
-				dp_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					opp-162000000 {
-						opp-hz = /bits/ 64 <162000000>;
-						required-opps = <&rpmhpd_opp_low_svs>;
-					};
-
-					opp-270000000 {
-						opp-hz = /bits/ 64 <270000000>;
-						required-opps = <&rpmhpd_opp_svs>;
-					};
-
-					opp-540000000 {
-						opp-hz = /bits/ 64 <540000000>;
-						required-opps = <&rpmhpd_opp_svs_l1>;
-					};
-
-					opp-810000000 {
-						opp-hz = /bits/ 64 <810000000>;
-						required-opps = <&rpmhpd_opp_nom>;
-					};
-				};
-			};
-
-			mdss_dsi0: dsi at ae94000 {
-				compatible = "qcom,sdm845-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0 0x0ae94000 0 0x400>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <4>;
-
-				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
-					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
-					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
-					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
-				clock-names = "byte",
-					      "byte_intf",
-					      "pixel",
-					      "core",
-					      "iface",
-					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
-
-				operating-points-v2 = <&dsi_opp_table>;
-				power-domains = <&rpmhpd SDM845_CX>;
-
-				phys = <&mdss_dsi0_phy>;
-
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_dsi0_in: endpoint {
-							remote-endpoint = <&dpu_intf1_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdss_dsi0_out: endpoint {
-						};
-					};
-				};
-			};
-
-			mdss_dsi0_phy: phy at ae94400 {
-				compatible = "qcom,dsi-phy-10nm";
-				reg = <0 0x0ae94400 0 0x200>,
-				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94a00 0 0x1e0>;
-				reg-names = "dsi_phy",
-					    "dsi_phy_lane",
-					    "dsi_pll";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&rpmhcc RPMH_CXO_CLK>;
-				clock-names = "iface", "ref";
-
-				status = "disabled";
-			};
-
-			mdss_dsi1: dsi at ae96000 {
-				compatible = "qcom,sdm845-dsi-ctrl",
-					     "qcom,mdss-dsi-ctrl";
-				reg = <0 0x0ae96000 0 0x400>;
-				reg-names = "dsi_ctrl";
-
-				interrupt-parent = <&mdss>;
-				interrupts = <5>;
-
-				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
-					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
-					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
-					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
-				clock-names = "byte",
-					      "byte_intf",
-					      "pixel",
-					      "core",
-					      "iface",
-					      "bus";
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
-
-				operating-points-v2 = <&dsi_opp_table>;
-				power-domains = <&rpmhpd SDM845_CX>;
-
-				phys = <&mdss_dsi1_phy>;
-
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port at 0 {
-						reg = <0>;
-						mdss_dsi1_in: endpoint {
-							remote-endpoint = <&dpu_intf2_out>;
-						};
-					};
-
-					port at 1 {
-						reg = <1>;
-						mdss_dsi1_out: endpoint {
-						};
-					};
-				};
-			};
-
-			mdss_dsi1_phy: phy at ae96400 {
-				compatible = "qcom,dsi-phy-10nm";
-				reg = <0 0x0ae96400 0 0x200>,
-				      <0 0x0ae96600 0 0x280>,
-				      <0 0x0ae96a00 0 0x10e>;
-				reg-names = "dsi_phy",
-					    "dsi_phy_lane",
-					    "dsi_pll";
-
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-
-				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-					 <&rpmhcc RPMH_CXO_CLK>;
-				clock-names = "iface", "ref";
-
-				status = "disabled";
-			};
-		};
-
-		gpu: gpu at 5000000 {
-			compatible = "qcom,adreno-630.2", "qcom,adreno";
-
-			reg = <0 0x05000000 0 0x40000>, <0 0x509e000 0 0x10>;
-			reg-names = "kgsl_3d0_reg_memory", "cx_mem";
-
-			/*
-			 * Look ma, no clocks! The GPU clocks and power are
-			 * controlled entirely by the GMU
-			 */
-
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
-			iommus = <&adreno_smmu 0>;
-
-			operating-points-v2 = <&gpu_opp_table>;
-
-			qcom,gmu = <&gmu>;
-
-			interconnects = <&mem_noc MASTER_GFX3D 0 &mem_noc SLAVE_EBI1 0>;
-			interconnect-names = "gfx-mem";
-
-			status = "disabled";
-
-			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-710000000 {
-					opp-hz = /bits/ 64 <710000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					opp-peak-kBps = <7216000>;
-				};
-
-				opp-675000000 {
-					opp-hz = /bits/ 64 <675000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					opp-peak-kBps = <7216000>;
-				};
-
-				opp-596000000 {
-					opp-hz = /bits/ 64 <596000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					opp-peak-kBps = <6220000>;
-				};
-
-				opp-520000000 {
-					opp-hz = /bits/ 64 <520000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					opp-peak-kBps = <6220000>;
-				};
-
-				opp-414000000 {
-					opp-hz = /bits/ 64 <414000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					opp-peak-kBps = <4068000>;
-				};
-
-				opp-342000000 {
-					opp-hz = /bits/ 64 <342000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					opp-peak-kBps = <2724000>;
-				};
-
-				opp-257000000 {
-					opp-hz = /bits/ 64 <257000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					opp-peak-kBps = <1648000>;
-				};
-			};
-		};
-
-		adreno_smmu: iommu at 5040000 {
-			compatible = "qcom,sdm845-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
-			reg = <0 0x05040000 0 0x10000>;
-			#iommu-cells = <1>;
-			#global-interrupts = <2>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
-			         <&gcc GCC_GPU_CFG_AHB_CLK>;
-			clock-names = "bus", "iface";
-
-			power-domains = <&gpucc GPU_CX_GDSC>;
-		};
-
-		gmu: gmu at 506a000 {
-			compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
-
-			reg = <0 0x0506a000 0 0x30000>,
-			      <0 0x0b280000 0 0x10000>,
-			      <0 0x0b480000 0 0x10000>;
-			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
-
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hfi", "gmu";
-
-			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
-			         <&gpucc GPU_CC_CXO_CLK>,
-				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
-				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
-			clock-names = "gmu", "cxo", "axi", "memnoc";
-
-			power-domains = <&gpucc GPU_CX_GDSC>,
-					<&gpucc GPU_GX_GDSC>;
-			power-domain-names = "cx", "gx";
-
-			iommus = <&adreno_smmu 5>;
-
-			operating-points-v2 = <&gmu_opp_table>;
-
-			status = "disabled";
-
-			gmu_opp_table: opp-table {
-				compatible = "operating-points-v2";
-
-				opp-400000000 {
-					opp-hz = /bits/ 64 <400000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-				};
-
-				opp-200000000 {
-					opp-hz = /bits/ 64 <200000000>;
-					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-				};
-			};
-		};
-
-		dispcc: clock-controller at af00000 {
-			compatible = "qcom,sdm845-dispcc";
-			reg = <0 0x0af00000 0 0x10000>;
-			clocks = <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
-				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
-				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
-			clock-names = "bi_tcxo",
-				      "gcc_disp_gpll0_clk_src",
-				      "gcc_disp_gpll0_div_clk_src",
-				      "dsi0_phy_pll_out_byteclk",
-				      "dsi0_phy_pll_out_dsiclk",
-				      "dsi1_phy_pll_out_byteclk",
-				      "dsi1_phy_pll_out_dsiclk",
-				      "dp_link_clk_divsel_ten",
-				      "dp_vco_divided_clk_src_mux";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		pdc_intc: interrupt-controller at b220000 {
-			compatible = "qcom,sdm845-pdc", "qcom,pdc";
-			reg = <0 0x0b220000 0 0x30000>;
-			qcom,pdc-ranges = <0 480 94>, <94 609 15>, <115 630 7>;
-			#interrupt-cells = <2>;
-			interrupt-parent = <&intc>;
-			interrupt-controller;
-		};
-
-		pdc_reset: reset-controller at b2e0000 {
-			compatible = "qcom,sdm845-pdc-global";
-			reg = <0 0x0b2e0000 0 0x20000>;
-			#reset-cells = <1>;
-		};
-
-		tsens0: thermal-sensor at c263000 {
-			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c263000 0 0x1ff>, /* TM */
-			      <0 0x0c222000 0 0x1ff>; /* SROT */
-			#qcom,sensors = <13>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		tsens1: thermal-sensor at c265000 {
-			compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-			reg = <0 0x0c265000 0 0x1ff>, /* TM */
-			      <0 0x0c223000 0 0x1ff>; /* SROT */
-			#qcom,sensors = <8>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "uplow", "critical";
-			#thermal-sensor-cells = <1>;
-		};
-
-		aoss_reset: reset-controller at c2a0000 {
-			compatible = "qcom,sdm845-aoss-cc";
-			reg = <0 0x0c2a0000 0 0x31000>;
-			#reset-cells = <1>;
-		};
-
-		aoss_qmp: power-management at c300000 {
-			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
-			reg = <0 0x0c300000 0 0x400>;
-			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&apss_shared 0>;
-
-			#clock-cells = <0>;
-
-			cx_cdev: cx {
-				#cooling-cells = <2>;
-			};
-
-			ebi_cdev: ebi {
-				#cooling-cells = <2>;
-			};
-		};
-
-		sram at c3f0000 {
-			compatible = "qcom,sdm845-rpmh-stats";
-			reg = <0 0x0c3f0000 0 0x400>;
-		};
-
-		spmi_bus: spmi at c440000 {
-			compatible = "qcom,spmi-pmic-arb";
-			reg = <0 0x0c440000 0 0x1100>,
-			      <0 0x0c600000 0 0x2000000>,
-			      <0 0x0e600000 0 0x100000>,
-			      <0 0x0e700000 0 0xa0000>,
-			      <0 0x0c40a000 0 0x26000>;
-			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
-			interrupt-names = "periph_irq";
-			interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,ee = <0>;
-			qcom,channel = <0>;
-			#address-cells = <2>;
-			#size-cells = <0>;
-			interrupt-controller;
-			#interrupt-cells = <4>;
-		};
-
-		sram at 146bf000 {
-			compatible = "qcom,sdm845-imem", "syscon", "simple-mfd";
-			reg = <0 0x146bf000 0 0x1000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0 0 0x146bf000 0x1000>;
-
-			pil-reloc at 94c {
-				compatible = "qcom,pil-reloc-info";
-				reg = <0x94c 0xc8>;
-			};
-		};
-
-		apps_smmu: iommu at 15000000 {
-			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
-			reg = <0 0x15000000 0 0x80000>;
-			#iommu-cells = <2>;
-			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		lpasscc: clock-controller at 17014000 {
-			compatible = "qcom,sdm845-lpasscc";
-			reg = <0 0x17014000 0 0x1f004>, <0 0x17300000 0 0x200>;
-			reg-names = "cc", "qdsp6ss";
-			#clock-cells = <1>;
-			status = "disabled";
-		};
-
-		gladiator_noc: interconnect at 17900000 {
-			compatible = "qcom,sdm845-gladiator-noc";
-			reg = <0 0x17900000 0 0xd080>;
-			#interconnect-cells = <2>;
-			qcom,bcm-voters = <&apps_bcm_voter>;
-		};
-
-		watchdog at 17980000 {
-			compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt";
-			reg = <0 0x17980000 0 0x1000>;
-			clocks = <&sleep_clk>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		apss_shared: mailbox at 17990000 {
-			compatible = "qcom,sdm845-apss-shared";
-			reg = <0 0x17990000 0 0x1000>;
-			#mbox-cells = <1>;
-		};
-
-		apps_rsc: rsc at 179c0000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0 0x179c0000 0 0x10000>,
-			      <0 0x179d0000 0 0x10000>,
-			      <0 0x179e0000 0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS  2>,
-					  <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>,
-					  <CONTROL_TCS 1>;
-			power-domains = <&CLUSTER_PD>;
-
-			apps_bcm_voter: bcm-voter {
-				compatible = "qcom,bcm-voter";
-			};
-
-			rpmhcc: clock-controller {
-				compatible = "qcom,sdm845-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
-			};
-
-			rpmhpd: power-controller {
-				compatible = "qcom,sdm845-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
-
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
-
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
-
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
-
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
-
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
-
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
-
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
-
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
-
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
-
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
-
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
-				};
-			};
-		};
-
-		intc: interrupt-controller at 17a00000 {
-			compatible = "arm,gic-v3";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0 0x17a00000 0 0x10000>,     /* GICD */
-			      <0 0x17a60000 0 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-
-			msi-controller at 17a40000 {
-				compatible = "arm,gic-v3-its";
-				msi-controller;
-				#msi-cells = <1>;
-				reg = <0 0x17a40000 0 0x20000>;
-				status = "disabled";
-			};
-		};
-
-		slimbam: dma-controller at 17184000 {
-			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
-			qcom,controlled-remotely;
-			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
-			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			qcom,ee = <1>;
-			qcom,num-ees = <2>;
-			iommus = <&apps_smmu 0x1806 0x0>;
-		};
-
-		timer at 17c90000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0 0 0x20000000>;
-			compatible = "arm,armv7-timer-mem";
-			reg = <0 0x17c90000 0 0x1000>;
-
-			frame at 17ca0000 {
-				frame-number = <0>;
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17ca0000 0x1000>,
-				      <0x17cb0000 0x1000>;
-			};
-
-			frame at 17cc0000 {
-				frame-number = <1>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17cc0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 17cd0000 {
-				frame-number = <2>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17cd0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 17ce0000 {
-				frame-number = <3>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17ce0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 17cf0000 {
-				frame-number = <4>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17cf0000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 17d00000 {
-				frame-number = <5>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17d00000 0x1000>;
-				status = "disabled";
-			};
-
-			frame at 17d10000 {
-				frame-number = <6>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17d10000 0x1000>;
-				status = "disabled";
-			};
-		};
-
-		osm_l3: interconnect at 17d41000 {
-			compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
-			reg = <0 0x17d41000 0 0x1400>;
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-			clock-names = "xo", "alternate";
-
-			#interconnect-cells = <1>;
-		};
-
-		cpufreq_hw: cpufreq at 17d43000 {
-			compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
-			reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>;
-			reg-names = "freq-domain0", "freq-domain1";
-
-			interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>;
-
-			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-			clock-names = "xo", "alternate";
-
-			#freq-domain-cells = <1>;
-			#clock-cells = <1>;
-		};
-
-		wifi: wifi at 18800000 {
-			compatible = "qcom,wcn3990-wifi";
-			status = "disabled";
-			reg = <0 0x18800000 0 0x800000>;
-			reg-names = "membase";
-			memory-region = <&wlan_msa_mem>;
-			clock-names = "cxo_ref_clk_pin";
-			clocks = <&rpmhcc RPMH_RF_CLK2>;
-			interrupts =
-				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
-			iommus = <&apps_smmu 0x0040 0x1>;
-		};
-	};
-
-	sound: sound {
-	};
-
-	thermal-zones {
-		cpu0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 1>;
-
-			trips {
-				cpu0_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu0_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu0_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 2>;
-
-			trips {
-				cpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu1_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu1_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu2-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 3>;
-
-			trips {
-				cpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu2_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu2_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 4>;
-
-			trips {
-				cpu3_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu3_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu3_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu4-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 7>;
-
-			trips {
-				cpu4_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu4_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu4_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu5-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 8>;
-
-			trips {
-				cpu5_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu5_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu5_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu6-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 9>;
-
-			trips {
-				cpu6_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu6_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu6_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cpu7-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 10>;
-
-			trips {
-				cpu7_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu7_alert1: trip-point1 {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-
-				cpu7_crit: cpu-crit {
-					temperature = <110000>;
-					hysteresis = <1000>;
-					type = "critical";
-				};
-			};
-		};
-
-		aoss0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 0>;
-
-			trips {
-				aoss0_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		cluster0-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 5>;
-
-			trips {
-				cluster0_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cluster0_crit: cluster0_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		cluster1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 6>;
-
-			trips {
-				cluster1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-				cluster1_crit: cluster1_crit {
-					temperature = <110000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-
-		gpu-top-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 11>;
-
-			trips {
-				gpu1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		gpu-bottom-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens0 12>;
-
-			trips {
-				gpu2_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		aoss1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 0>;
-
-			trips {
-				aoss1_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		q6-modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 1>;
-
-			trips {
-				q6_modem_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		mem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 2>;
-
-			trips {
-				mem_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		wlan-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 3>;
-
-			trips {
-				wlan_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		q6-hvx-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 4>;
-
-			trips {
-				q6_hvx_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 5>;
-
-			trips {
-				camera_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		video-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 6>;
-
-			trips {
-				video_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-
-		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&tsens1 7>;
-
-			trips {
-				modem_alert0: trip-point0 {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "hot";
-				};
-			};
-		};
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
-	};
-};

-- 
2.44.0



More information about the U-Boot mailing list