[PATCH v2 3/3] imx8mm_venice_defconfig: Enable PCIe/NVMe support

[Tim Harvey]

Enable PCIe/NVMe support. Also, enable the reset
driver which is a prerequisite for PCIe support.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
v2: no changes
---
 configs/imx8mm_venice_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index 517b70b69477..0f97b4b84243 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -12,6 +12,7 @@ CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mm-venice-gw71xx-0x"
 CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_TARGET_IMX8MM_VENICE=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
@@ -20,6 +21,7 @@ CONFIG_SPL_STACK=0x920000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x3f8000
 CONFIG_SYS_LOAD_ADDR=0x48200000
+CONFIG_PCI=y
 CONFIG_SYS_MEMTEST_START=0x40000000
 CONFIG_SYS_MEMTEST_END=0x80000000
 CONFIG_FIT=y
@@ -60,6 +62,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP6=y
@@ -120,6 +123,9 @@ CONFIG_PHY_GIGE=y
 CONFIG_FEC_MXC=y
 CONFIG_KSZ9477=y
 CONFIG_MII=y
+CONFIG_NVME_PCI=y
+CONFIG_PCIE_DW_IMX=y
+CONFIG_PHY_IMX8M_PCIE=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
-- 
2.25.1