[PATCH] arm: mach-k3: am642: Fix reset for workaround errata ID i2331

[Andrew Davis]

To workaround an issue in AM642 we reset the SoC in early boot. For that
we first probed the sysreset driver by calling uclass_get_device(). The
ti-sci sysreset driver is now probed during the ti-sci firmware probe.
Update this call to probe the firmware driver which will then probe
the sysreset driver allowing do_reset() to again function as expected.

Reported-by: Jonathan Humphreys <j-humphreys at ti.com>
Fixes: fc5d40283483 ("firmware: ti_sci: Bind sysreset driver when enabled")
Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm/mach-k3/am642_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c
index ddf47ef0a9b..80c3cb3479f 100644
--- a/arch/arm/mach-k3/am642_init.c
+++ b/arch/arm/mach-k3/am642_init.c
@@ -226,7 +226,7 @@ void board_init_f(ulong dummy)
 	 * The warm reset realigns internal clocks and prevents the lockup from
 	 * happening.
 	 */
-	ret = uclass_first_device_err(UCLASS_SYSRESET, &dev);
+	ret = uclass_get_device_by_driver(UCLASS_FIRMWARE, DM_DRIVER_GET(ti_sci), &dev);
 	if (ret)
 		printf("\n%s:uclass device error [%d]\n",__func__,ret);
 
-- 
2.39.2