[PATCH] mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_ops
Jaehoon Chung
jh80.chung at samsung.com
Fri Apr 19 07:38:07 CEST 2024
Hi,
> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Jaehoon Chung
> Sent: Wednesday, April 17, 2024 9:26 AM
> To: 'Greg Malysa' <greg.malysa at timesys.com>; u-boot at lists.denx.de; 'Peng Fan' <peng.fan at nxp.com>
> Cc: 'Ian Roberts' <ian.roberts at timesys.com>; 'Nathan Barrett-Morrison' <nathan.morrison at timesys.com>;
> 'Jonas Karlman' <jonas at kwiboo.se>; 'Kever Yang' <kever.yang at rock-chips.com>; 'Peter Geis'
> <pgwipeout at gmail.com>; 'Sean Anderson' <sean.anderson at seco.com>; 'Simon Glass' <sjg at chromium.org>;
> 'Tom Rini' <trini at konsulko.com>
> Subject: RE: [PATCH] mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_ops
>
>
>
> > -----Original Message-----
> > From: Greg Malysa <greg.malysa at timesys.com>
> > Sent: Tuesday, March 26, 2024 11:18 AM
> > To: u-boot at lists.denx.de; Peng Fan <peng.fan at nxp.com>; Jaehoon Chung <jh80.chung at samsung.com>
> > Cc: Ian Roberts <ian.roberts at timesys.com>; Nathan Barrett-Morrison <nathan.morrison at timesys.com>;
> Greg
> > Malysa <greg.malysa at timesys.com>; Jonas Karlman <jonas at kwiboo.se>; Kever Yang <kever.yang at rock-
> > chips.com>; Peter Geis <pgwipeout at gmail.com>; Sean Anderson <sean.anderson at seco.com>; Simon Glass
> > <sjg at chromium.org>; Tom Rini <trini at konsulko.com>
> > Subject: [PATCH] mmc: sdhci: introduce adma_write_desc() hook to struct sdhci_ops
> >
> > From: Ian Roberts <ian.roberts at timesys.com>
> >
> > Add this hook so that it can be overridden with driver specific
> > implementations. We also let the original sdhci_adma_write_desc()
> > accept &desc so that the function can set its new value. Then export
> > the function so that it could be reused by driver's specific
> > implementations.
> >
> > The above is a port of Linux kernel commit 54552e4948cbf
> >
> > In addition, allow drivers to allocate their own ADMA descriptor
> > tables if additional space is required.
> >
> > Finally, fix the assignment of adma_addr to fix compiler warning
> > on 64-bit platforms that still use 32-bit DMA addressing.
> >
> > Co-developed-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
> > Signed-off-by: Nathan Barrett-Morrison <nathan.morrison at timesys.com>
> > Signed-off-by: Greg Malysa <greg.malysa at timesys.com>
> > Signed-off-by: Ian Roberts <ian.roberts at timesys.com>
>
> Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
Some target are failed to build. (e.g, j721e_beagleboneai64_r5)
+drivers/mmc/sdhci-adma.c: In function '__sdhci_adma_write_desc':
+drivers/mmc/sdhci-adma.c:37:43: error: 'const struct sdhci_ops' has no member named 'adma_write_desc'
+ 37 | if (host && host->ops && host->ops->adma_write_desc)
+ | ^~
+drivers/mmc/sdhci-adma.c:38:26: error: 'const struct sdhci_ops' has no member named 'adma_write_desc'
+ 38 | host->ops->adma_write_desc(host, desc, addr, len, end);
+ | ^~
+make[3]: *** [scripts/Makefile.build:257: drivers/mmc/sdhci-adma.o] Error 1
+make[2]: *** [scripts/Makefile.build:397: drivers/mmc] Error 2
Best Regards,
Jaehoon Chung
>
> Best Regards,
> Jaehoon Chung
>
> >
> > ---
> >
> >
> > ---
> > drivers/mmc/fsl_esdhc.c | 2 +-
> > drivers/mmc/sdhci-adma.c | 41 +++++++++++++++++++++++++++-------------
> > drivers/mmc/sdhci.c | 8 +++++---
> > include/sdhci.h | 12 ++++++++++--
> > 4 files changed, 44 insertions(+), 19 deletions(-)
> >
> > diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> > index d506666669..bd0671cc52 100644
> > --- a/drivers/mmc/fsl_esdhc.c
> > +++ b/drivers/mmc/fsl_esdhc.c
> > @@ -252,7 +252,7 @@ static void esdhc_setup_dma(struct fsl_esdhc_priv *priv, struct mmc_data *data)
> > priv->adma_desc_table) {
> > debug("Using ADMA2\n");
> > /* prefer ADMA2 if it is available */
> > - sdhci_prepare_adma_table(priv->adma_desc_table, data,
> > + sdhci_prepare_adma_table(NULL, priv->adma_desc_table, data,
> > priv->dma_addr);
> >
> > adma_addr = virt_to_phys(priv->adma_desc_table);
> > diff --git a/drivers/mmc/sdhci-adma.c b/drivers/mmc/sdhci-adma.c
> > index 8213223d3f..8c38448b6a 100644
> > --- a/drivers/mmc/sdhci-adma.c
> > +++ b/drivers/mmc/sdhci-adma.c
> > @@ -9,9 +9,10 @@
> > #include <malloc.h>
> > #include <asm/cache.h>
> >
> > -static void sdhci_adma_desc(struct sdhci_adma_desc *desc,
> > - dma_addr_t addr, u16 len, bool end)
> > +void sdhci_adma_write_desc(struct sdhci_host *host, void **next_desc,
> > + dma_addr_t addr, int len, bool end)
> > {
> > + struct sdhci_adma_desc *desc = *next_desc;
> > u8 attr;
> >
> > attr = ADMA_DESC_ATTR_VALID | ADMA_DESC_TRANSFER_DATA;
> > @@ -19,17 +20,30 @@ static void sdhci_adma_desc(struct sdhci_adma_desc *desc,
> > attr |= ADMA_DESC_ATTR_END;
> >
> > desc->attr = attr;
> > - desc->len = len;
> > + desc->len = len & 0xffff;
> > desc->reserved = 0;
> > desc->addr_lo = lower_32_bits(addr);
> > #ifdef CONFIG_DMA_ADDR_T_64BIT
> > desc->addr_hi = upper_32_bits(addr);
> > #endif
> > +
> > + *next_desc += ADMA_DESC_LEN;
> > +}
> > +
> > +static inline void __sdhci_adma_write_desc(struct sdhci_host *host,
> > + void **desc, dma_addr_t addr,
> > + int len, bool end)
> > +{
> > + if (host && host->ops && host->ops->adma_write_desc)
> > + host->ops->adma_write_desc(host, desc, addr, len, end);
> > + else
> > + sdhci_adma_write_desc(host, desc, addr, len, end);
> > }
> >
> > /**
> > * sdhci_prepare_adma_table() - Populate the ADMA table
> > *
> > + * @host: Pointer to the sdhci_host
> > * @table: Pointer to the ADMA table
> > * @data: Pointer to MMC data
> > * @addr: DMA address to write to or read from
> > @@ -39,25 +53,26 @@ static void sdhci_adma_desc(struct sdhci_adma_desc *desc,
> > * Please note, that the table size depends on CONFIG_SYS_MMC_MAX_BLK_COUNT and
> > * we don't have to check for overflow.
> > */
> > -void sdhci_prepare_adma_table(struct sdhci_adma_desc *table,
> > - struct mmc_data *data, dma_addr_t addr)
> > +void sdhci_prepare_adma_table(struct sdhci_host *host,
> > + struct sdhci_adma_desc *table,
> > + struct mmc_data *data, dma_addr_t start_addr)
> > {
> > + dma_addr_t addr = start_addr;
> > uint trans_bytes = data->blocksize * data->blocks;
> > - uint desc_count = DIV_ROUND_UP(trans_bytes, ADMA_MAX_LEN);
> > - struct sdhci_adma_desc *desc = table;
> > - int i = desc_count;
> > + void *next_desc = table;
> > + int i = DIV_ROUND_UP(trans_bytes, ADMA_MAX_LEN);
> >
> > while (--i) {
> > - sdhci_adma_desc(desc, addr, ADMA_MAX_LEN, false);
> > + __sdhci_adma_write_desc(host, &next_desc, addr,
> > + ADMA_MAX_LEN, false);
> > addr += ADMA_MAX_LEN;
> > trans_bytes -= ADMA_MAX_LEN;
> > - desc++;
> > }
> >
> > - sdhci_adma_desc(desc, addr, trans_bytes, true);
> > + __sdhci_adma_write_desc(host, &next_desc, addr, trans_bytes, true);
> >
> > - flush_cache((dma_addr_t)table,
> > - ROUND(desc_count * sizeof(struct sdhci_adma_desc),
> > + flush_cache((phys_addr_t)table,
> > + ROUND(next_desc - (void *)table,
> > ARCH_DMA_MINALIGN));
> > }
> >
> > diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> > index 0178ed8a11..65090348ae 100644
> > --- a/drivers/mmc/sdhci.c
> > +++ b/drivers/mmc/sdhci.c
> > @@ -111,7 +111,7 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
> > }
> > #if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
> > else if (host->flags & (USE_ADMA | USE_ADMA64)) {
> > - sdhci_prepare_adma_table(host->adma_desc_table, data,
> > + sdhci_prepare_adma_table(host, host->adma_desc_table, data,
> > host->start_addr);
> >
> > sdhci_writel(host, lower_32_bits(host->adma_addr),
> > @@ -897,8 +897,10 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
> > __func__);
> > return -EINVAL;
> > }
> > - host->adma_desc_table = sdhci_adma_init();
> > - host->adma_addr = (dma_addr_t)host->adma_desc_table;
> > + if (!host->adma_desc_table) {
> > + host->adma_desc_table = sdhci_adma_init();
> > + host->adma_addr = virt_to_phys(host->adma_desc_table);
> > + }
> >
> > #ifdef CONFIG_DMA_ADDR_T_64BIT
> > host->flags |= USE_ADMA64;
> > diff --git a/include/sdhci.h b/include/sdhci.h
> > index a1b74e3bd7..4bde7db5c7 100644
> > --- a/include/sdhci.h
> > +++ b/include/sdhci.h
> > @@ -291,6 +291,11 @@ struct sdhci_ops {
> > * Return: 0 if successful, -ve on error
> > */
> > int (*set_enhanced_strobe)(struct sdhci_host *host);
> > +
> > +#if CONFIG_IS_ENABLED(MMC_SDHCI_ADMA)
> > + void (*adma_write_desc)(struct sdhci_host *host, void **desc,
> > + dma_addr_t addr, int len, bool end);
> > +#endif
> > };
> >
> > #define ADMA_MAX_LEN 65532
> > @@ -526,8 +531,11 @@ extern const struct dm_mmc_ops sdhci_ops;
> > #else
> > #endif
> >
> > +void sdhci_adma_write_desc(struct sdhci_host *host, void **next_desc,
> > + dma_addr_t addr, int len, bool end);
> > struct sdhci_adma_desc *sdhci_adma_init(void);
> > -void sdhci_prepare_adma_table(struct sdhci_adma_desc *table,
> > - struct mmc_data *data, dma_addr_t addr);
> > +void sdhci_prepare_adma_table(struct sdhci_host *host,
> > + struct sdhci_adma_desc *table,
> > + struct mmc_data *data, dma_addr_t start_addr);
> >
> > #endif /* __SDHCI_HW_H */
> > --
> > 2.43.2
>
More information about the U-Boot
mailing list