[PATCH 3/3] phycore-rk3288: Migrate to OF_UPSTREAM
Wadim Egorov
w.egorov at phytec.de
Fri Apr 19 08:51:17 CEST 2024
The phycore-rk3288 can be migrated to OF_UPSTREAM.
Drop redundant device tree files, update MAINTAINERS and
defconfig's DEFAULT_DEVICE_TREE for rockchip vendor prefix accordingly.
Move device tree nodes required for u-boot to rk3288-phycore-rdk-u-boot.dtsi
such as chosen, i2c_eeprom_id and it's alias.
Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi | 19 +
arch/arm/dts/rk3288-phycore-rdk.dts | 271 -----------
arch/arm/dts/rk3288-phycore-som.dtsi | 506 --------------------
board/phytec/phycore_rk3288/MAINTAINERS | 2 -
configs/phycore-rk3288_defconfig | 7 +-
6 files changed, 23 insertions(+), 783 deletions(-)
delete mode 100644 arch/arm/dts/rk3288-phycore-rdk.dts
delete mode 100644 arch/arm/dts/rk3288-phycore-som.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 48a2b85542..a7a97a9f08 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -81,7 +81,6 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \
rk3288-evb.dtb \
rk3288-firefly.dtb \
rk3288-miqi.dtb \
- rk3288-phycore-rdk.dtb \
rk3288-popmetal.dtb \
rk3288-rock2-square.dtb \
rk3288-rock-pi-n8.dtb \
diff --git a/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi b/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi
index 383b383acc..12096eec54 100644
--- a/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi
@@ -2,6 +2,16 @@
#include "rk3288-u-boot.dtsi"
+/ {
+ aliases {
+ eeprom0 = &i2c_eeprom_id;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+};
+
&dmc {
rockchip,num-channels = <2>;
rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
@@ -29,6 +39,15 @@
bootph-all;
};
};
+
+ /* M24C32-D Identification page */
+ i2c_eeprom_id: eeprom at 58 {
+ bootph-all;
+
+ compatible = "atmel,24c32";
+ reg = <0x58>;
+ pagesize = <32>;
+ };
};
&pinctrl {
diff --git a/arch/arm/dts/rk3288-phycore-rdk.dts b/arch/arm/dts/rk3288-phycore-rdk.dts
deleted file mode 100644
index ebea8e67ea..0000000000
--- a/arch/arm/dts/rk3288-phycore-rdk.dts
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Device tree file for Phytec PCM-947 carrier board
- * Copyright (C) 2017 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov at phytec.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-#include <dt-bindings/input/input.h>
-#include "rk3288-phycore-som.dtsi"
-
-/ {
- model = "Phytec RK3288 PCM-947";
- compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
-
- chosen {
- stdout-path = &uart2;
- };
-
- user_buttons: user-buttons {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&user_button_pins>;
-
- button at 0 {
- label = "home";
- linux,code = <KEY_HOME>;
- gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
-
- button at 1 {
- label = "menu";
- linux,code = <KEY_MENU>;
- gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
- wakeup-source;
- };
- };
-
- vcc_host0_5v: usb-host0-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host0_vbus_drv>;
- regulator-name = "vcc_host0_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vdd_in_otg_out>;
- };
-
- vcc_host1_5v: usb-host1-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host1_vbus_drv>;
- regulator-name = "vcc_host1_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vdd_in_otg_out>;
- };
-
- vcc_otg_5v: usb-otg-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc_otg_5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vdd_in_otg_out>;
- };
-};
-
-&gmac {
- status = "okay";
-};
-
-&hdmi {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-
- touchscreen at 44 {
- compatible = "st,stmpe811";
- reg = <0x44>;
- };
-
- adc at 64 {
- compatible = "maxim,max1037";
- reg = <0x64>;
- };
-
- i2c_rtc: rtc at 68 {
- compatible = "rv4162";
- reg = <0x68>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_rtc_int>;
- interrupt-parent = <&gpio5>;
- interrupts = <10 0>;
- };
-};
-
-&i2c3 {
- status = "okay";
-
- i2c_eeprom_cb: eeprom at 51 {
- compatible = "atmel,24c32";
- reg = <0x51>;
- pagesize = <32>;
- };
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&pinctrl {
- pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
- bias-pull-up;
- drive-strength = <12>;
- };
-
- buttons {
- user_button_pins: user-button-pins {
- /* button 1 */
- rockchip,pins = <8 3 RK_FUNC_GPIO &pcfg_pull_up>,
- /* button 2 */
- <8 0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- rv4162 {
- i2c_rtc_int: i2c-rtc-int {
- rockchip,pins = <5 10 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- /*
- * Default drive strength isn't enough to achieve even
- * high-speed mode on pcm-947 board so bump up to 12 mA.
- */
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_12ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_12ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_12ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- touchscreen {
- ts_irq_pin: ts-irq-pin {
- rockchip,pins = <5 15 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_host {
- host0_vbus_drv: host0-vbus-drv {
- rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- host1_vbus_drv: host1-vbus-drv {
- rockchip,pins = <2 0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb_otg {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vdd_io_sd>;
- vqmmc-supply = <&vdd_io_sd>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-phycore-som.dtsi b/arch/arm/dts/rk3288-phycore-som.dtsi
deleted file mode 100644
index bde5910ff6..0000000000
--- a/arch/arm/dts/rk3288-phycore-som.dtsi
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * Device tree file for Phytec phyCORE-RK3288 SoM
- * Copyright (C) 2017 PHYTEC Messtechnik GmbH
- * Author: Wadim Egorov <w.egorov at phytec.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/net/ti-dp83867.h>
-#include "rk3288.dtsi"
-
-/ {
- model = "Phytec RK3288 phyCORE";
- compatible = "phytec,rk3288-phycore-som", "rockchip,rk3288";
-
- /*
- * Set the minimum memory size here and
- * let the bootloader set the real size.
- */
- memory {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x80000000>;
- };
-
- aliases {
- rtc0 = &i2c_rtc;
- rtc1 = &rk818;
- eeprom0 = &i2c_eeprom_id;
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- leds: user-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&user_led>;
-
- user {
- label = "green_led";
- gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "keep";
- };
- };
-
- vdd_emmc_io: vdd-emmc-io {
- compatible = "regulator-fixed";
- regulator-name = "vdd_emmc_io";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vdd_3v3_io>;
- };
-
- vdd_in_otg_out: vdd-in-otg-out {
- compatible = "regulator-fixed";
- regulator-name = "vdd_in_otg_out";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vdd_misc_1v8: vdd-misc-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "vdd_misc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
- operating-points = <
- /* KHz uV */
- 1800000 1400000
- 1608000 1350000
- 1512000 1300000
- 1416000 1200000
- 1200000 1100000
- 1008000 1050000
- 816000 1000000
- 696000 950000
- 600000 900000
- 408000 900000
- 312000 900000
- 216000 900000
- 126000 900000
- >;
-};
-
-&emmc {
- status = "okay";
- bus-width = <8>;
- cap-mmc-highspeed;
- disable-wp;
- non-removable;
- num-slots = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
- vmmc-supply = <&vdd_3v3_io>;
- vqmmc-supply = <&vdd_emmc_io>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins &phy_rst &phy_int>;
- phy-handle = <&phy0>;
- phy-supply = <&vdd_eth_2v5>;
- phy-mode = "rgmii-id";
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
- tx_delay = <0x0>;
- rx_delay = <0x0>;
-
- mdio0 {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy at 0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- interrupt-parent = <&gpio4>;
- interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
- ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
- ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
- enet-phy-lane-no-swap;
- };
- };
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
-};
-
-&io_domains {
- audio-supply = <&vdd_3v3_io>;
- bb-supply = <&vdd_3v3_io>;
- dvp-supply = <&vdd_3v3_io>;
- flash0-supply = <&vdd_emmc_io>;
- flash1-supply = <&vdd_misc_1v8>;
- gpio1830-supply = <&vdd_3v3_io>;
- gpio30-supply = <&vdd_3v3_io>;
- lcdc-supply = <&vdd_3v3_io>;
- sdcard-supply = <&vdd_io_sd>;
- wifi-supply = <&vdd_3v3_io>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <400000>;
-
- rk818: pmic at 1c {
- status = "okay";
- compatible = "rockchip,rk818";
- reg = <0x1c>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
-
- vcc1-supply = <&vdd_sys>;
- vcc2-supply = <&vdd_sys>;
- vcc3-supply = <&vdd_sys>;
- vcc4-supply = <&vdd_sys>;
- boost-supply = <&vdd_in_otg_out>;
- vcc6-supply = <&vdd_sys>;
- vcc7-supply = <&vdd_misc_1v8>;
- vcc8-supply = <&vdd_misc_1v8>;
- vcc9-supply = <&vdd_3v3_io>;
- vddio-supply = <&vdd_3v3_io>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-name = "vdd_gpu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1250000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vdd_3v3_io: DCDC_REG4 {
- regulator-name = "vdd_3v3_io";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd_sys: DCDC_BOOST {
- regulator-name = "vdd_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <5000000>;
- };
- };
-
- /* vcc9 */
- vdd_sd: SWITCH_REG {
- regulator-name = "vdd_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* vcc6 */
- vdd_eth_2v5: LDO_REG2 {
- regulator-name = "vdd_eth_2v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2500000>;
- };
- };
-
- /* vcc7 */
- vdd_1v0: LDO_REG3 {
- regulator-name = "vdd_1v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- /* vcc8 */
- vdd_1v8_lcd_ldo: LDO_REG4 {
- regulator-name = "vdd_1v8_lcd_ldo";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- /* vcc8 */
- vdd_1v0_lcd: LDO_REG6 {
- regulator-name = "vdd_1v0_lcd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- /* vcc7 */
- vdd_1v8_ldo: LDO_REG7 {
- regulator-name = "vdd_1v8_ldo";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- /* vcc9 */
- vdd_io_sd: LDO_REG9 {
- regulator-name = "vdd_io_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
- };
- };
-
- /* M24C32-D */
- i2c_eeprom: eeprom at 50 {
- compatible = "atmel,24c32";
- reg = <0x50>;
- pagesize = <32>;
- };
-
- /* M24C32-D Identification page */
- i2c_eeprom_id: eeprom at 58 {
- compatible = "atmel,24c32";
- reg = <0x58>;
- pagesize = <32>;
- };
-
- vdd_cpu: regulator at 60 {
- compatible = "fcs,fan53555";
- reg = <0x60>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- regulator-enable-ramp-delay = <300>;
- regulator-name = "vdd_cpu";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1430000>;
- regulator-ramp-delay = <8000>;
- vin-supply = <&vdd_sys>;
- };
-};
-
-&pinctrl {
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- emmc {
- /*
- * We run eMMC at max speed; bump up drive strength.
- * We also have external pulls, so disable the internal ones.
- */
- emmc_clk: emmc-clk {
- rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_12ma>;
- };
-
- emmc_cmd: emmc-cmd {
- rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_12ma>;
- };
-
- emmc_bus8: emmc-bus8 {
- rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 1 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 2 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 3 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 4 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 5 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 6 RK_FUNC_2 &pcfg_pull_none_12ma>,
- <3 7 RK_FUNC_2 &pcfg_pull_none_12ma>;
- };
- };
-
- gmac {
- phy_int: phy-int {
- rockchip,pins = <4 2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_rst: phy-rst {
- rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- leds {
- user_led: user-led {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- /* Pin for switching state between sleep and non-sleep state */
- pmic_sleep: pmic-sleep {
- rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vdd_1v8_ldo>;
-};
-
-&spi2 {
- status = "okay";
-
- serial_flash: flash at 0 {
- compatible = "micron,n25q128a13", "jedec,spi-nor";
- reg = <0x0>;
- spi-max-frequency = <50000000>;
- m25p,fast-read;
- #address-cells = <1>;
- #size-cells = <1>;
- status = "okay";
- };
-};
-
-&tsadc {
- status = "okay";
- rockchip,hw-tshut-mode = <0>;
- rockchip,hw-tshut-polarity = <0>;
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
-};
diff --git a/board/phytec/phycore_rk3288/MAINTAINERS b/board/phytec/phycore_rk3288/MAINTAINERS
index 60471d478b..e3b0af98e9 100644
--- a/board/phytec/phycore_rk3288/MAINTAINERS
+++ b/board/phytec/phycore_rk3288/MAINTAINERS
@@ -1,9 +1,7 @@
phyCORE-RK3288
M: Wadim Egorov <w.egorov at phytec.de>
S: Maintained
-F: arch/arm/dts/rk3288-phycore-rdk.dts
F: arch/arm/dts/rk3288-phycore-rdk-u-boot.dtsi
-F: arch/arm/dts/rk3288-phycore-som.dtsi
F: board/phytec/phycore_rk3288
F: include/configs/phycore_rk3288.h
F: configs/phycore-rk3288_defconfig
diff --git a/configs/phycore-rk3288_defconfig b/configs/phycore-rk3288_defconfig
index ce999e48df..87b259b71d 100644
--- a/configs/phycore-rk3288_defconfig
+++ b/configs/phycore-rk3288_defconfig
@@ -8,7 +8,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x100000
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_ENV_OFFSET=0x3F8000
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-phycore-rdk"
+CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3288-phycore-rdk"
CONFIG_SPL_TEXT_BASE=0xff704000
CONFIG_SYS_MONITOR_LEN=614400
CONFIG_ROCKCHIP_RK3288=y
@@ -16,6 +16,8 @@ CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
CONFIG_TARGET_PHYCORE_RK3288=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_SPL_STACK=0xff718000
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SYS_LOAD_ADDR=0x800800
@@ -31,8 +33,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_NO_BSS_LIMIT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
@@ -48,6 +48,7 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
--
2.25.1
More information about the U-Boot
mailing list