[PATCH v3 06/28] rockchip: rk3566-anbernic-rgxx3: Remove SPL_ROCKCHIP_BACK_TO_BROM option

[Kever Yang]

On 2024/4/22 14:28, Jonas Karlman wrote:
> SPL_ROCKCHIP_BACK_TO_BROM should normally only be enabled when BROM
> should load U-Boot binary. SPL on Anbernic RGxx3 devices load TF-A and
> U-Boot proper from FIT images and does never jump back to BROM from SPL.
>
> Remove the superfluous Kconfig option from defconfig to align with other
> RK356x boards.
>
> This patch have no intended change in boot behavior.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v3: No change
> v2: No change
> ---
>   configs/anbernic-rgxx3-rk3566_defconfig | 2 --
>   1 file changed, 2 deletions(-)
>
> diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
> index c8c9238f96fc..24b050c59b53 100644
> --- a/configs/anbernic-rgxx3-rk3566_defconfig
> +++ b/configs/anbernic-rgxx3-rk3566_defconfig
> @@ -6,9 +6,7 @@ CONFIG_SPL_GPIO=y
>   CONFIG_NR_DRAM_BANKS=2
>   CONFIG_DEFAULT_DEVICE_TREE="rk3566-anbernic-rgxx3"
>   CONFIG_ROCKCHIP_RK3568=y
> -CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
>   CONFIG_ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON=y
> -CONFIG_SPL_MMC=y
>   CONFIG_SPL_SERIAL=y
>   CONFIG_TARGET_ANBERNIC_RGXX3_RK3566=y
>   CONFIG_DEBUG_UART_BASE=0xFE660000