[PATCH v3 26/28] rockchip: rk3588-generic: Use M0 iomux for UART2

[Kever Yang]

On 2024/4/22 14:29, Jonas Karlman wrote:
> The default pinctrl for UART2 is using M1 iomux, however, all other
> supported RK3588 boards in U-Boot use M0 iomux for UART2.
>
> Change to use the M0 pinctrl for UART2 to match other supported boards.
>
> Fixes: b54c3d0dd69b ("rockchip: board: Add minimal generic RK3588S/RK3588 board")
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v3: New patch split from rk3588 bootph patch
> ---
>   arch/arm/dts/rk3588-generic.dts | 1 +
>   1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/dts/rk3588-generic.dts b/arch/arm/dts/rk3588-generic.dts
> index e4721d97a87d..baafe7463f1b 100644
> --- a/arch/arm/dts/rk3588-generic.dts
> +++ b/arch/arm/dts/rk3588-generic.dts
> @@ -40,5 +40,6 @@
>   };
>   
>   &uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
>   	status = "okay";
>   };