[PATCH v2 13/14] rockchip: rk3308-rock-pi-s: Update defconfig

Kever Yang kever.yang at rock-chips.com
Mon Apr 22 10:52:52 CEST 2024


On 2024/4/9 02:14, Jonas Karlman wrote:
> Update defconfig for rk3308-rock-pi-s with new defaults.
>
> Add OF_LIBFDT_OVERLAY=y to support device tree overlays.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
>
> Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to
> allow use of U-Boot cmdline.
>
> Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY.
>
> Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to
> allow full use of USB 2.0 host and otg ports.
>
> Enable EFI_LOADER to allow EFI boot.
>
> Also fix use of USB 2.0 otg port by removing improper use of phy-supply
> and regulator-always-on props.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: Keep DEBUG_UART_BOARD_INIT disabled
> ---
>   arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi |  8 ++++++
>   configs/rock-pi-s-rk3308_defconfig        | 32 +++++++++--------------
>   2 files changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
> index 8d34ed1b3a36..a6fb8b12da38 100644
> --- a/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
> +++ b/arch/arm/dts/rk3308-rock-pi-s-u-boot.dtsi
> @@ -15,6 +15,10 @@
>   	bootph-some-ram;
>   };
>   
> +&u2phy_otg {
> +	/delete-property/ phy-supply;
> +};
> +
>   &uart0 {
>   	bootph-all;
>   	clock-frequency = <24000000>;
> @@ -32,6 +36,10 @@
>   	bootph-all;
>   };
>   
> +&vcc5v0_otg {
> +	/delete-property/ regulator-always-on;
> +};
> +
>   &vdd_core {
>   	regulator-init-microvolt = <1015000>;
>   };
> diff --git a/configs/rock-pi-s-rk3308_defconfig b/configs/rock-pi-s-rk3308_defconfig
> index 27ee24a62290..37a124eae181 100644
> --- a/configs/rock-pi-s-rk3308_defconfig
> +++ b/configs/rock-pi-s-rk3308_defconfig
> @@ -6,7 +6,6 @@ CONFIG_DEFAULT_DEVICE_TREE="rk3308-rock-pi-s"
>   CONFIG_OF_LIBFDT_OVERLAY=y
>   CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3308=y
> -CONFIG_SPL_DRIVERS_MISC=y
>   CONFIG_TARGET_EVB_RK3308=y
>   CONFIG_DEBUG_UART_BASE=0xFF0A0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
> @@ -17,28 +16,19 @@ CONFIG_ANDROID_BOOT_IMAGE=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-rock-pi-s.dtb"
> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
>   # CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_SPL_MAX_SIZE=0x20000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_CMD_BDI is not set
> -# CONFIG_CMD_CONSOLE is not set
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_IMI is not set
> -# CONFIG_CMD_XIMG is not set
> +CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> -# CONFIG_CMD_LOADB is not set
> -# CONFIG_CMD_LOADS is not set
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
> -# CONFIG_CMD_ITEST is not set
> -# CONFIG_CMD_SETEXPR is not set
> -# CONFIG_CMD_SLEEP is not set
> -# CONFIG_SPL_DOS_PARTITION is not set
> -# CONFIG_ISO_PARTITION is not set
> -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_CMD_RNG=y
> +CONFIG_CMD_KASLRSEED=y
> +CONFIG_CMD_REGULATOR=y
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -52,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y
>   CONFIG_SUPPORT_EMMC_RPMB=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PHY=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>   CONFIG_PINCTRL=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_DM_REGULATOR_FIXED=y
> @@ -63,15 +55,15 @@ CONFIG_RAM=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> +CONFIG_SYSINFO=y
>   CONFIG_SYSRESET=y
>   CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
>   CONFIG_USB_GADGET=y
>   CONFIG_USB_GADGET_DWC2_OTG=y
>   CONFIG_USB_GADGET_DOWNLOAD=y
> -CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
>   CONFIG_LZO=y
>   CONFIG_ERRNO_STR=y
> -# CONFIG_EFI_LOADER is not set


More information about the U-Boot mailing list