[PATCH v2 12/14] rockchip: rk3308-roc-cc: Update defconfig

[Kever Yang]

On 2024/4/9 02:14, Jonas Karlman wrote:
> Update defconfig for rk3308-roc-cc with new defaults.
>
> Add OF_LIBFDT_OVERLAY=y to support device tree overlays.
>
> Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.
>
> Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to
> allow use of U-Boot cmdline.
>
> Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY.
>
> Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to
> allow full use of USB 2.0 host and otg ports.
>
> Enable EFI_LOADER to allow EFI boot.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
> v2: No change
> ---
>   configs/roc-cc-rk3308_defconfig | 35 +++++++++++++--------------------
>   1 file changed, 14 insertions(+), 21 deletions(-)
>
> diff --git a/configs/roc-cc-rk3308_defconfig b/configs/roc-cc-rk3308_defconfig
> index 041fa75b9659..ef58bd657532 100644
> --- a/configs/roc-cc-rk3308_defconfig
> +++ b/configs/roc-cc-rk3308_defconfig
> @@ -4,9 +4,9 @@ CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
>   CONFIG_SPL_GPIO=y
>   CONFIG_DEFAULT_DEVICE_TREE="rk3308-roc-cc"
> +CONFIG_OF_LIBFDT_OVERLAY=y
>   CONFIG_DM_RESET=y
>   CONFIG_ROCKCHIP_RK3308=y
> -CONFIG_SPL_DRIVERS_MISC=y
>   CONFIG_TARGET_ROC_RK3308_CC=y
>   CONFIG_DEBUG_UART_BASE=0xFF0C0000
>   CONFIG_DEBUG_UART_CLOCK=24000000
> @@ -15,30 +15,20 @@ CONFIG_DEBUG_UART=y
>   CONFIG_ANDROID_BOOT_IMAGE=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
> -CONFIG_BOOTDELAY=0
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-roc-cc.dtb"
> -CONFIG_SYS_CONSOLE_INFO_QUIET=y
>   # CONFIG_DISPLAY_CPUINFO is not set
> -CONFIG_SPL_MAX_SIZE=0x20000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> -# CONFIG_CMD_BDI is not set
> -# CONFIG_CMD_CONSOLE is not set
> -# CONFIG_CMD_ELF is not set
> -# CONFIG_CMD_IMI is not set
> -# CONFIG_CMD_XIMG is not set
> +CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
> -# CONFIG_CMD_LOADB is not set
> -# CONFIG_CMD_LOADS is not set
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
> -# CONFIG_CMD_ITEST is not set
> -# CONFIG_CMD_SETEXPR is not set
> -# CONFIG_CMD_SLEEP is not set
> -# CONFIG_SPL_DOS_PARTITION is not set
> -# CONFIG_ISO_PARTITION is not set
> -CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
> +CONFIG_CMD_RNG=y
> +CONFIG_CMD_KASLRSEED=y
> +CONFIG_CMD_REGULATOR=y
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
>   CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -52,27 +42,30 @@ CONFIG_SYS_I2C_ROCKCHIP=y
>   CONFIG_SUPPORT_EMMC_RPMB=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_PHY_REALTEK=y
> +CONFIG_DM_ETH_PHY=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> -CONFIG_PHY=y
> +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>   CONFIG_PINCTRL=y
>   CONFIG_REGULATOR_PWM=y
>   CONFIG_DM_REGULATOR_FIXED=y
>   CONFIG_SPL_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
>   CONFIG_PWM_ROCKCHIP=y
>   CONFIG_RAM=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> +CONFIG_SYSINFO=y
>   CONFIG_SYSRESET=y
>   CONFIG_USB=y
> +CONFIG_DM_USB_GADGET=y
>   CONFIG_USB_EHCI_HCD=y
>   CONFIG_USB_EHCI_GENERIC=y
> -CONFIG_USB_DWC2=y
>   CONFIG_USB_GADGET=y
>   CONFIG_USB_GADGET_DWC2_OTG=y
>   CONFIG_USB_GADGET_DOWNLOAD=y
> -CONFIG_SPL_TINY_MEMSET=y
> +CONFIG_USB_FUNCTION_ROCKUSB=y
>   CONFIG_LZO=y
>   CONFIG_ERRNO_STR=y
> -# CONFIG_EFI_LOADER is not set