[PATCH 31/31] rockchip: rk3399-pinephone-pro: Sync device tree from linux v6.8
Kever Yang
kever.yang at rock-chips.com
Tue Apr 23 13:15:16 CEST 2024
On 2024/4/1 04:28, Jonas Karlman wrote:
> Sync rk3399-pinephone-pro device tree from linux v6.8.
>
> Add SPI flash related node and options to support booting from SPI flash.
>
> Remove REGULATOR_PWM=y, board does not use pwm-regulator compatible.
>
> Add SYS_NS16550_MEM32=y to use readl/writel for serial console.
>
> Remove SPL_TINY_MEMSET=y to use full memset in SPL.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi | 12 ++
> arch/arm/dts/rk3399-pinephone-pro.dts | 147 ++++++++++++++++++
> configs/pinephone-pro-rk3399_defconfig | 8 +-
> 3 files changed, 163 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
> index dcfcec4f3072..6a248691e29d 100644
> --- a/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
> +++ b/arch/arm/dts/rk3399-pinephone-pro-u-boot.dtsi
> @@ -13,3 +13,15 @@
> &sdmmc {
> max-frequency = <20000000>;
> };
> +
> +&spi1 {
> + status = "okay";
> +
> + flash at 0 {
> + bootph-pre-ram;
> + bootph-some-ram;
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + };
> +};
> diff --git a/arch/arm/dts/rk3399-pinephone-pro.dts b/arch/arm/dts/rk3399-pinephone-pro.dts
> index 04403a76238b..61f3fec5a8b1 100644
> --- a/arch/arm/dts/rk3399-pinephone-pro.dts
> +++ b/arch/arm/dts/rk3399-pinephone-pro.dts
> @@ -10,6 +10,7 @@
> */
>
> /dts-v1/;
> +#include <dt-bindings/input/gpio-keys.h>
> #include <dt-bindings/input/linux-event-codes.h>
> #include "rk3399.dtsi"
> #include "rk3399-opp.dtsi"
> @@ -29,6 +30,31 @@
> stdout-path = "serial2:115200n8";
> };
>
> + adc-keys {
> + compatible = "adc-keys";
> + io-channels = <&saradc 1>;
> + io-channel-names = "buttons";
> + keyup-threshold-microvolt = <1600000>;
> + poll-interval = <100>;
> +
> + button-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + press-threshold-microvolt = <100000>;
> + };
> +
> + button-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + press-threshold-microvolt = <600000>;
> + };
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm0 0 50000 0>;
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
> pinctrl-names = "default";
> @@ -102,6 +128,37 @@
> /* WL_REG_ON on module */
> reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
> };
> +
> + /* MIPI DSI panel 1.8v supply */
> + vcc1v8_lcd: vcc1v8-lcd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + regulator-name = "vcc1v8_lcd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + vin-supply = <&vcc3v3_sys>;
> + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + };
> +
> + /* MIPI DSI panel 2.8v supply */
> + vcc2v8_lcd: vcc2v8-lcd {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + regulator-name = "vcc2v8_lcd";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + vin-supply = <&vcc3v3_sys>;
> + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + };
> +};
> +
> +&cpu_alert0 {
> + temperature = <65000>;
> +};
> +&cpu_alert1 {
> + temperature = <68000>;
> };
>
> &cpu_l0 {
> @@ -132,6 +189,11 @@
> status = "okay";
> };
>
> +&gpu {
> + mali-supply = <&vdd_gpu>;
> + status = "okay";
> +};
> +
> &i2c0 {
> clock-frequency = <400000>;
> i2c-scl-rising-time-ns = <168>;
> @@ -326,6 +388,25 @@
> };
> };
>
> +&i2c3 {
> + i2c-scl-rising-time-ns = <450>;
> + i2c-scl-falling-time-ns = <15>;
> + status = "okay";
> +
> + touchscreen at 14 {
> + compatible = "goodix,gt1158";
> + reg = <0x14>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
> + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
> + AVDD28-supply = <&vcc3v0_touch>;
> + VDDIO-supply = <&vcc3v0_touch>;
> + touchscreen-size-x = <720>;
> + touchscreen-size-y = <1440>;
> + };
> +};
> +
> &cluster0_opp {
> opp04 {
> status = "disabled";
> @@ -355,6 +436,39 @@
> status = "okay";
> };
>
> +&mipi_dsi {
> + status = "okay";
> + clock-master;
> +
> + ports {
> + mipi_out: port at 1 {
> + #address-cells = <0>;
> + #size-cells = <0>;
> + reg = <1>;
> +
> + mipi_out_panel: endpoint {
> + remote-endpoint = <&mipi_in_panel>;
> + };
> + };
> + };
> +
> + panel at 0 {
> + compatible = "hannstar,hsd060bhw4";
> + reg = <0>;
> + backlight = <&backlight>;
> + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vcc2v8_lcd>;
> + iovcc-supply = <&vcc1v8_lcd>;
> + pinctrl-names = "default";
> +
> + port {
> + mipi_in_panel: endpoint {
> + remote-endpoint = <&mipi_out_panel>;
> + };
> + };
> + };
> +};
> +
> &pmu_io_domains {
> pmu1830-supply = <&vcc_1v8>;
> status = "okay";
> @@ -422,6 +536,15 @@
> status = "okay";
> };
>
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcca1v8_s3>;
> + status = "okay";
> +};
> +
> &sdmmc {
> bus-width = <4>;
> cap-sd-highspeed;
> @@ -472,3 +595,27 @@
> &uart2 {
> status = "okay";
> };
> +
> +&vopb {
> + status = "okay";
> + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
> + <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
> + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
> + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&vopl {
> + status = "okay";
> + assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
> + <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
> + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
> + assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
> +};
> +
> +&vopl_mmu {
> + status = "okay";
> +};
> diff --git a/configs/pinephone-pro-rk3399_defconfig b/configs/pinephone-pro-rk3399_defconfig
> index c36898364b5d..1bb7b35a255c 100644
> --- a/configs/pinephone-pro-rk3399_defconfig
> +++ b/configs/pinephone-pro-rk3399_defconfig
> @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
> CONFIG_COUNTER_FREQUENCY=24000000
> CONFIG_ARCH_ROCKCHIP=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_SF_DEFAULT_SPEED=20000000
> +CONFIG_SF_DEFAULT_SPEED=10000000
> CONFIG_ENV_SIZE=0x8000
> CONFIG_ENV_OFFSET=0x3F8000
> CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinephone-pro"
> @@ -33,7 +33,6 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_GPT=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_MMC=y
> -CONFIG_CMD_PCI=y
> CONFIG_CMD_USB=y
> # CONFIG_CMD_SETEXPR is not set
> CONFIG_CMD_TIME=y
> @@ -54,18 +53,20 @@ CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_SDMA=y
> CONFIG_MMC_SDHCI_ROCKCHIP=y
> CONFIG_SF_DEFAULT_BUS=1
> +CONFIG_SPI_FLASH_SFDP_SUPPORT=y
> CONFIG_SPI_FLASH_GIGADEVICE=y
> +CONFIG_SPI_FLASH_SILICONKAISER=y
> CONFIG_SPI_FLASH_WINBOND=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> CONFIG_PHY_ROCKCHIP_TYPEC=y
> CONFIG_DM_PMIC_FAN53555=y
> CONFIG_PMIC_RK8XX=y
> -CONFIG_REGULATOR_PWM=y
> CONFIG_REGULATOR_RK8XX=y
> CONFIG_PWM_ROCKCHIP=y
> CONFIG_RAM_ROCKCHIP_LPDDR4=y
> CONFIG_BAUDRATE=1500000
> CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550_MEM32=y
> CONFIG_ROCKCHIP_SPI=y
> CONFIG_SYSRESET=y
> CONFIG_USB=y
> @@ -85,5 +86,4 @@ CONFIG_VIDEO=y
> CONFIG_DISPLAY=y
> CONFIG_VIDEO_ROCKCHIP=y
> CONFIG_DISPLAY_ROCKCHIP_EDP=y
> -CONFIG_SPL_TINY_MEMSET=y
> CONFIG_ERRNO_STR=y
More information about the U-Boot
mailing list