[PATCH 08/19] ARM: dts: stm32: Add alternate pinmux for MP13 PWM5 pins

[Patrice CHOTARD]

On 4/22/24 01:16, Marek Vasut wrote:
> Add another mux option for PWM5 pins, this is used on
> DH electronics STM32MP13xx DHCOR DHSBC board.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: u-boot at dh-electronics.com
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  arch/arm/dts/stm32mp13-pinctrl.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> index b58bf6c0024..d19408f19f9 100644
> --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> @@ -245,6 +245,21 @@
>  		};
>  	};
>  
> +	pwm5_pins_a: pwm5-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */
> +			bias-pull-down;
> +			drive-push-pull;
> +			slew-rate = <0>;
> +		};
> +	};
> +
> +	pwm5_sleep_pins_a: pwm5-sleep-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */
> +		};
> +	};
> +
>  	pwm8_pins_a: pwm8-0 {
>  		pins {
>  			pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice