[PATCH 14/19] ARM: dts: stm32: Add alternate pinmux for MP13 SPI3 pins

[Patrice CHOTARD]

On 4/22/24 01:17, Marek Vasut wrote:
> Add another mux option for SPI3 pins, this is used on
> DH electronics STM32MP13xx DHCOR DHSBC board.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> Cc: u-boot at dh-electronics.com
> Cc: uboot-stm32 at st-md-mailman.stormreply.com
> ---
>  arch/arm/dts/stm32mp13-pinctrl.dtsi | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> index 17acd2850d3..7abd227e69f 100644
> --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> @@ -534,6 +534,29 @@
>  		};
>  	};
>  
> +	spi3_pins_a: spi3-0 {
> +		pins1 {
> +			pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */
> +				 <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */
> +			bias-disable;
> +			drive-push-pull;
> +			slew-rate = <1>;
> +		};
> +
> +		pins2 {
> +			pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */
> +			bias-disable;
> +		};
> +	};
> +
> +	spi3_sleep_pins_a: spi3-sleep-0 {
> +		pins {
> +			pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */
> +				 <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */
> +				 <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */
> +		};
> +	};
> +
>  	spi5_pins_a: spi5-0 {
>  		pins1 {
>  			pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>

Thanks
Patrice