[PATCH v1] arm: dts: meson-axg: add NAND controller node for AXG

[Arseniy Krasnov]

On 26.04.2024 11:55, neil.armstrong at linaro.org wrote:
> On 26/04/2024 10:40, Arseniy Krasnov wrote:
>> Hi,
>>
>> On 26.04.2024 11:21, Neil Armstrong wrote:
>>> Hi,
>>>
>>> On 25/04/2024 19:50, Arseniy Krasnov wrote:
>>>> nfc: Synced from Linux commit 7ca2ef33179f ("Linux 6.6-rc1")
>>>> nand_all_pins: Synced from Linux commit be18d53c32b2 ("Linux 6.7-rc3")
>>>
>>> No need to sync DT anymore, this is handled by OF_UPSTREAM and for next release
>>> it's already aligned with v6.9 DT.
>>>
>>> Please try your patches with master or next branch of U-Boot repo.
>>
>> Ok, so I can remove "Synced from" from commit description, thus make it empty, and test that patch applies correctly
>> on uboot master/ next ?
> 
> It won't apply because arch/arm/dts/meson-axg.dtsi doesn't exist anymore, DT comes
> from dts/upstream, however if you need to add u-boot specific changes you can
> still update arch/arm/dts/meson-axgi-u-boot.dtsi

Ahh ok, I see. Thanks. This patch must be dropped, as same code is
already in uboot in dts/upstream

Thanks

> 
> Neil
> 
>>
>> Thanks
>>
>>>
>>> Neil
>>>
>>>>
>>>> Signed-off-by: Arseniy Krasnov <avkrasnov at salutedevices.com>
>>>> ---
>>>>    arch/arm/dts/meson-axg.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>>>>    1 file changed, 36 insertions(+)
>>>>
>>>> diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi
>>>> index 3f5254eeb4..4f6fdd5523 100644
>>>> --- a/arch/arm/dts/meson-axg.dtsi
>>>> +++ b/arch/arm/dts/meson-axg.dtsi
>>>> @@ -430,6 +430,27 @@
>>>>                        };
>>>>                    };
>>>>    +                nand_all_pins: nand_all_pins {
>>>> +                    mux {
>>>> +                        groups = "emmc_nand_d0",
>>>> +                             "emmc_nand_d1",
>>>> +                             "emmc_nand_d2",
>>>> +                             "emmc_nand_d3",
>>>> +                             "emmc_nand_d4",
>>>> +                             "emmc_nand_d5",
>>>> +                             "emmc_nand_d6",
>>>> +                             "emmc_nand_d7",
>>>> +                             "nand_ce0",
>>>> +                             "nand_ale",
>>>> +                             "nand_cle",
>>>> +                             "nand_wen_clk",
>>>> +                             "nand_ren_wr";
>>>> +                        function = "nand";
>>>> +                        input-enable;
>>>> +                        bias-pull-up;
>>>> +                    };
>>>> +                };
>>>> +
>>>>                    emmc_ds_pins: emmc_ds {
>>>>                        mux {
>>>>                            groups = "emmc_ds";
>>>> @@ -1906,6 +1927,21 @@
>>>>                    resets = <&reset RESET_SD_EMMC_C>;
>>>>                };
>>>>    +            nfc: nand-controller at 7800 {
>>>> +                compatible = "amlogic,meson-axg-nfc";
>>>> +                reg = <0x0 0x7800 0x0 0x100>,
>>>> +                      <0x0 0x7000 0x0 0x800>;
>>>> +                reg-names = "nfc", "emmc";
>>>> +                pinctrl-0 = <&nand_all_pins>;
>>>> +                pinctrl-names = "default";
>>>> +                #address-cells = <1>;
>>>> +                #size-cells = <0>;
>>>> +                interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
>>>> +                clocks = <&clkc CLKID_SD_EMMC_C>,
>>>> +                     <&clkc CLKID_FCLK_DIV2>;
>>>> +                clock-names = "core", "device";
>>>> +            };
>>>> +
>>>>                usb2_phy1: phy at 9020 {
>>>>                    compatible = "amlogic,meson-gxl-usb2-phy";
>>>>                    #phy-cells = <0>;
>>>
>