[PATCH] venice: show emmc boot hardware partition

[Dragan Simic]

Hello Tim,

Please see my comments below.

On 2024-04-26 18:55, Tim Harvey wrote:
> To aid in understanding what emmc hardware partition is being
> used to boot on power-up, display the hardware partition name in the
> SPL.
> 
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  board/gateworks/venice/spl.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/board/gateworks/venice/spl.c 
> b/board/gateworks/venice/spl.c
> index 3b0f11f2fd0f..531bad260b6d 100644
> --- a/board/gateworks/venice/spl.c
> +++ b/board/gateworks/venice/spl.c
> @@ -366,9 +366,25 @@ unsigned long
> board_spl_mmc_get_uboot_raw_sector(struct mmc *mmc, unsigned long
> 
>  const char *spl_board_loader_name(u32 boot_device)
>  {
> +	struct mmc *mmc;
> +	int part;
> +
>  	switch (boot_device) {
>  	/* SDHC2 */
>  	case BOOT_DEVICE_MMC1:
> +		mmc_init_device(0);
> +		mmc = find_mmc_device(0);
> +		mmc_init(mmc);
> +		part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
> +		switch (part) {
> +		case 1:
> +			return "eMMC boot0";
> +		case 2:
> +			return "eMMC boot1";
> +		case 0:
> +		case 7:
> +			return "eMMC user";
> +		}
>  		return "eMMC";
>  	/* SDHC3 */
>  	case BOOT_DEVICE_MMC2:

Your other patch on the mailing list does something similar. [1]
Perhaps this is a good oportunity to extract and unify the logic
that produces the names of eMMC partitions?  That would also allow
other boards to use the same logic.

[1] 
https://lore.kernel.org/u-boot/a1e9206f-0cbf-44b2-a5e7-351f77c0d2b5@denx.de/T/#u