[PATCH v2 03/18] rockchip: rk3399-puma: Use common bss and stack addresses

[Jonas Karlman]

The rk3399-puma board is currently using SPL stack and bss addr in SRAM,
the same addr typically used by TPL, this differs from most other RK3399
boards.

Switch to use the common bss and stack addresses introduced in commit
008ba0d56d00 ("rockchip: Add common default bss and stack addresses").

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v2: New patch
---
 configs/puma-rk3399_defconfig | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index ec7d52a6e13e..bd4926cf0fce 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -2,11 +2,8 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
-CONFIG_TEXT_BASE=0x00200000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_SIZE=0x3000
 CONFIG_ENV_OFFSET=0x3F8000
@@ -16,12 +13,6 @@ CONFIG_ROCKCHIP_RK3399=y
 CONFIG_ROCKCHIP_BOOT_MODE_REG=0x0
 CONFIG_ROCKCHIP_SPI_IMAGE=y
 CONFIG_TARGET_PUMA_RK3399=y
-CONFIG_SPL_STACK=0xff8effff
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0xff8e0000
-CONFIG_SPL_BSS_MAX_SIZE=0x10000
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_DEBUG_UART_BASE=0xFF180000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -33,7 +24,6 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_MAX_SIZE=0x2e000
 CONFIG_SPL_PAD_TO=0x38000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
-- 
2.43.2