[PATCH v7 02/12] riscv: dts: jh7110: Make u-boot device trees adapting to upstream DT

Hal Feng hal.feng at starfivetech.com
Tue Dec 3 04:04:20 CET 2024


Add u-boot features to the U-Boot device tree.

Tested-by: Anand Moon <linux.amoon at gmail.com>
Tested-by: E Shattow <lucent at gmail.com>
Reviewed-by: E Shattow <lucent at gmail.com>
Acked-by: Sumit Garg <sumit.garg at linaro.org>
Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
---
 ...10-starfive-visionfive-2-v1.3b-u-boot.dtsi | 33 +++++++++++++++---
 arch/riscv/dts/jh7110-u-boot.dtsi             | 34 +++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
index 3012466b30..7953459e67 100644
--- a/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
@@ -6,6 +6,10 @@
 #include "binman.dtsi"
 #include "jh7110-u-boot.dtsi"
 / {
+	aliases {
+		spi0 = &qspi;
+	};
+
 	chosen {
 		bootph-pre-ram;
 	};
@@ -27,6 +31,9 @@
 
 &uart0 {
 	bootph-pre-ram;
+	reg-offset = <0>;
+	current-speed = <115200>;
+	clock-frequency = <24000000>;
 };
 
 &mmc0 {
@@ -39,30 +46,45 @@
 
 &qspi {
 	bootph-pre-ram;
+	spi-max-frequency = <250000000>;
 
-	nor-flash at 0 {
+	flash at 0 {
 		bootph-pre-ram;
+		/delete-property/ cdns,read-delay;
+		spi-max-frequency = <100000000>;
 	};
 };
 
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+			  <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+			  <&syscrg JH7110_SYSCLK_QSPI_REF>;
+	assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>;
+};
+
 &sysgpio {
 	bootph-pre-ram;
 };
 
 &mmc0_pins {
 	bootph-pre-ram;
-	mmc0-pins-rest {
+	rst-pins {
 		bootph-pre-ram;
 	};
 };
 
 &mmc1_pins {
 	bootph-pre-ram;
-	mmc1-pins0 {
+	clk-pins {
 		bootph-pre-ram;
 	};
 
-	mmc1-pins1 {
+	mmc-pins {
 		bootph-pre-ram;
 	};
 };
@@ -78,6 +100,9 @@
 	bootph-pre-ram;
 	eeprom at 50 {
 		bootph-pre-ram;
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
 	};
 };
 
diff --git a/arch/riscv/dts/jh7110-u-boot.dtsi b/arch/riscv/dts/jh7110-u-boot.dtsi
index 52c1d60859..21a2ab1789 100644
--- a/arch/riscv/dts/jh7110-u-boot.dtsi
+++ b/arch/riscv/dts/jh7110-u-boot.dtsi
@@ -46,6 +46,15 @@
 		};
 	};
 
+	timer {
+		compatible = "riscv,timer";
+		interrupts-extended = <&cpu0_intc 5>,
+				      <&cpu1_intc 5>,
+				      <&cpu2_intc 5>,
+				      <&cpu3_intc 5>,
+				      <&cpu4_intc 5>;
+	};
+
 	soc {
 		bootph-pre-ram;
 
@@ -73,10 +82,35 @@
 	bootph-pre-ram;
 };
 
+&gmac0_rgmii_rxin {
+	bootph-pre-ram;
+};
+
 &gmac0_rmii_refin {
 	bootph-pre-ram;
 };
 
+&gmac1_rgmii_rxin {
+	bootph-pre-ram;
+};
+
+&gmac1_rmii_refin {
+	bootph-pre-ram;
+};
+
+&stmmac_axi_setup {
+	snps,wr_osr_lmt = <4>;
+	snps,rd_osr_lmt = <4>;
+};
+
+&gmac0 {
+	snps,perfect-filter-entries = <8>;
+};
+
+&gmac1 {
+	snps,perfect-filter-entries = <8>;
+};
+
 &aoncrg {
 	bootph-pre-ram;
 };
-- 
2.43.2



More information about the U-Boot mailing list