[PATCH v3 1/3] phycore_imx8mm: Switch to using env text files

[Yunus Bas]

Move the environment into the board directory and convert header to a
txt file. In addition, this patch also applies following changes:

- Change default nfsroot path to /srv/nfs due to compliance with Linux
FHS 3.0.

- Rename specific variables as stated in the bootstd documentation.
Renamed variables:
	fdt_addr => fdt_addr_r
	fdt_file => fdtfile

Signed-off-by: Yunus Bas <y.bas at phytec.de>
---
Changes in v3:
- Removed sd_dev entry
- Added Maintainers and reviewers
- Added changes description
---
 .../phytec/phycore_imx8mm/phycore_imx8mm.env  | 51 +++++++++++++++++++
 include/configs/phycore_imx8mm.h              | 46 -----------------
 2 files changed, 51 insertions(+), 46 deletions(-)
 create mode 100644 board/phytec/phycore_imx8mm/phycore_imx8mm.env

diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
new file mode 100644
index 00000000000..33a2595fa16
--- /dev/null
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -0,0 +1,51 @@
+console=ttymxc2,115200
+emmc_dev=2
+fdt_addr_r=0x48000000
+fdtfile=CONFIG_DEFAULT_FDT_FILE
+image=Image
+ip_dyn=yes
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
+mmcargs=
+	setenv bootargs console=${console}
+	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+mmcautodetect=yes
+mmcboot=
+	echo Booting from mmc ...;
+	run mmcargs;
+	if run loadfdt; then
+		if test ${dofitboot} = 1; then
+			booti ${loadaddr} - ${fdt_addr_r}
+		else
+			echo WARN: Cannot load the DT;
+		fi;
+	fi;
+mmcdev=CONFIG_SYS_MMC_ENV_DEV
+mmcpart=1
+mmcroot=2
+netargs=
+	setenv bootargs console=${console} root=/dev/nfs ip=dhcp
+	nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=
+	echo Booting from net ...;
+	if test ${ip_dyn} = yes; then
+		setenv get_cmd dhcp;
+	else
+		setenv get_cmd tftp;
+	fi;
+	${get_cmd} ${loadaddr} ${image};
+	run netargs;
+	if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then
+		booti ${loadaddr} - ${fdt_addr_r};
+	else
+		echo WARN: Cannot load the DT;
+	fi;
+nfsroot=/srv/nfs
+update_bootimg=
+	mmc dev ${mmcdev};
+	if dhcp ${loadaddr} ${update_filepath}/${update_filename}; then
+		setexpr fw_sz ${filesize} / 0x200;
+		mmc write ${loadaddr} ${update_offset} ${fw_sz};
+	fi;
+update_filename=flash.bin
+update_offset=0x42
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index e74a3f184c6..20e2ab832ee 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -20,52 +20,6 @@
 /* For RAW image gives a error info not panic */
 #endif
 
-#define CFG_EXTRA_ENV_SETTINGS \
-	"image=Image\0" \
-	"console=ttymxc2,115200\0" \
-	"fdt_addr=0x48000000\0" \
-	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"ip_dyn=yes\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"mmcpart=1\0" \
-	"mmcroot=2\0" \
-	"update_offset=0x42\0" \
-	"update_filename=flash.bin\0" \
-	"update_bootimg="						\
-		"mmc dev ${mmcdev} ; "		\
-		"if dhcp ${loadaddr} ${update_filepath}/${update_filename} ; then "	\
-		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
-		"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; "	\
-		"fi\0" \
-	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw\0" \
-	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
-	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"if run loadfdt; then " \
-			"booti ${loadaddr} - ${fdt_addr}; " \
-		"else " \
-			"echo WARN: Cannot load the DT; " \
-		"fi;\0 " \
-	"nfsroot=/nfs\0" \
-	"netargs=setenv bootargs console=${console} root=/dev/nfs ip=dhcp " \
-		"nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
-	"netboot=echo Booting from net ...; " \
-		"run netargs; " \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"${get_cmd} ${loadaddr} ${image}; " \
-		"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-			"booti ${loadaddr} - ${fdt_addr}; " \
-		"else " \
-			"echo WARN: Cannot load the DT; " \
-		"fi;\0" \
-
 /* Link Definitions */
 
 #define CFG_SYS_INIT_RAM_ADDR	0x40000000
-- 
2.25.1