[PATCH v3 3/3] board: phytec: phycore_imx8mm: Add RAUC boot logic to environment

[Yunus Bas]

Add RAUC boot logic to the environment.

Signed-off-by: Yunus Bas <y.bas at phytec.de>
---
Changes in v3:
- Added Maintainers and reviewers
- Added Changes description
---
 board/phytec/phycore_imx8mm/phycore_imx8mm.env | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
index 44fa3731b8a..a7d14e774a0 100644
--- a/board/phytec/phycore_imx8mm/phycore_imx8mm.env
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -1,6 +1,11 @@
+#include <env/phytec/rauc.env>
+
 bootcmd=
 	mmc dev ${mmcdev};
 	if mmc rescan; then
+		if test ${doraucboot} = 1; then
+			run raucinit;
+		fi;
 		if run loadimage; then
 			run mmcboot;
 		else
@@ -17,7 +22,7 @@ loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
 loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}
 mmcargs=
 	setenv bootargs console=${console}
-	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+	root=/dev/mmcblk${mmcdev}p${mmcroot} ${raucargs} rootwait rw
 mmcautodetect=yes
 mmcboot=
 	echo Booting from mmc ...;
-- 
2.25.1