[PATCH v2] verdin-am62: fix FASTBOOT_BUF_ADDR and FASTBOOT_BUF_SIZE

[Hiago De Franco]

From: Hiago De Franco <hiago.franco at toradex.com>

The current value of CONFIG_FASTBOOT_BUF_ADDR is incorrect for hardware
with 512MB and 1GB of RAM. The RAM address ranges for these devices are:

- 512MB:
  - Start: 0x80000000
  - End:   0xA0000000
- 1GB:
  - Start: 0x80000000
  - End:   0xC0000000

The current buffer address makes fastboot downloads work only on
hardware with 2GB of RAM.

To fix this issue:
1. Lower CONFIG_FASTBOOT_BUF_ADDR to 0x88200000. This makes the buffer
   to be equal ot CONFIG_SYS_LOAD_ADDR, which is a safe address to
   download files using fastboot.

2. Reduce the size of the download buffer to 128MB, avoiding overlaps
   with RAMDISK_ADDR_R. This is a good enough value for individual
   downloads.

These changes make fastboot downloads work with 512MB and 1GB devices.

Fixes: defe30a78b76 ("verdin-am62: add DFU, USB and UUU fastboot support")
Signed-off-by: Hiago De Franco <hiago.franco at toradex.com>
---
 configs/verdin-am62_a53_defconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/configs/verdin-am62_a53_defconfig b/configs/verdin-am62_a53_defconfig
index 49fb9790e295..fc9ffa0f392b 100644
--- a/configs/verdin-am62_a53_defconfig
+++ b/configs/verdin-am62_a53_defconfig
@@ -122,8 +122,8 @@ CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0xC0000000
-CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
+CONFIG_FASTBOOT_BUF_ADDR=0x88200000
+CONFIG_FASTBOOT_BUF_SIZE=0x8000000
 CONFIG_FASTBOOT_UUU_SUPPORT=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_GPIO_HOG=y
-- 
2.39.5