[PATCH v7 14/14] efi_selftest: add test for IPv4 Config2 protocol
Adriano Cordova
adrianox at gmail.com
Wed Dec 4 04:05:29 CET 2024
Add a test for the EFI_IP4_CONFIG2_PROTOCOL. The test sets the ip
policy to static, adds an ip address, and then reads the current
ip address and checks for it to be the same as the one that was set.
Signed-off-by: Adriano Cordova <adrianox at gmail.com>
---
Changes in v7:
- Fixed sizeof() calls when possible
- When setting up the test, check if any handle was found before looping
through the handles.
(no changes since v4)
Changes in v4:
- Removed unnecessary void* casts
(no changes since v2)
lib/efi_selftest/Makefile | 2 +
lib/efi_selftest/efi_selftest_ipconfig.c | 176 +++++++++++++++++++++++
2 files changed, 178 insertions(+)
create mode 100644 lib/efi_selftest/efi_selftest_ipconfig.c
diff --git a/lib/efi_selftest/Makefile b/lib/efi_selftest/Makefile
index 140c08effc..17fbfad116 100644
--- a/lib/efi_selftest/Makefile
+++ b/lib/efi_selftest/Makefile
@@ -53,6 +53,8 @@ efi_selftest_watchdog.o
obj-$(CONFIG_EFI_ECPT) += efi_selftest_ecpt.o
obj-$(CONFIG_NETDEVICES) += efi_selftest_snp.o
obj-$(CONFIG_EFI_HTTP_PROTOCOL) += efi_selftest_http.o
+obj-$(CONFIG_EFI_HTTP_PROTOCOL) += efi_selftest_ipconfig.o
+
obj-$(CONFIG_EFI_DEVICE_PATH_TO_TEXT) += efi_selftest_devicepath.o
obj-$(CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2) += \
efi_selftest_unicode_collation.o
diff --git a/lib/efi_selftest/efi_selftest_ipconfig.c b/lib/efi_selftest/efi_selftest_ipconfig.c
new file mode 100644
index 0000000000..8d594f5e19
--- /dev/null
+++ b/lib/efi_selftest/efi_selftest_ipconfig.c
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * efi_selftest_ipconfig
+ *
+ * This unit test covers the IPv4 Config2 Protocol.
+ *
+ */
+
+#include <efi_selftest.h>
+#include <charset.h>
+#include <net.h>
+
+static struct efi_boot_services *boottime;
+
+static struct efi_ip4_config2_protocol *ip4_config2;
+static const efi_guid_t efi_ip4_config2_guid = EFI_IP4_CONFIG2_PROTOCOL_GUID;
+
+/*
+ * Setup unit test.
+ *
+ * Open IPv4 Config2 protocol
+ *
+ * @handle: handle of the loaded image
+ * @systable: system table
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int setup(const efi_handle_t handle,
+ const struct efi_system_table *systable)
+{
+ efi_status_t ret;
+ efi_handle_t *net_handle;
+ efi_uintn_t num_handles;
+ efi_handle_t *handles;
+
+ boottime = systable->boottime;
+
+ num_handles = 0;
+ boottime->locate_handle_buffer(BY_PROTOCOL, &efi_ip4_config2_guid,
+ NULL, &num_handles, &handles);
+
+ if (!num_handles) {
+ efi_st_error("Failed to locate ipv4 config2 protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ for (net_handle = handles; num_handles--; net_handle++) {
+ ret = boottime->open_protocol(*net_handle, &efi_ip4_config2_guid,
+ (void **)&ip4_config2, 0, 0,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL);
+ if (ret != EFI_SUCCESS || !ip4_config2)
+ continue;
+ break; // Get first handle that supports ipv4
+ }
+
+ if (!ip4_config2) {
+ efi_st_error("Failed to open ipv4 config2 protocol\n");
+ return EFI_ST_FAILURE;
+ }
+
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Execute unit test.
+ *
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int execute(void)
+{
+ efi_status_t ret;
+ enum efi_ip4_config2_policy policy;
+ efi_uintn_t data_size;
+ struct efi_ip4_config2_manual_address manual_address;
+ struct efi_ip4_config2_manual_address orig_address;
+ u8 netmask[] = {255, 255, 255, 0};
+ u8 ip[] = {10, 0, 0, 1};
+
+ /* Setup may have failed */
+ if (!ip4_config2) {
+ efi_st_error("Setup failure, cannot proceed with test\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Set policy to static */
+ policy = EFI_IP4_CONFIG2_POLICY_STATIC;
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_POLICY,
+ sizeof(policy), (void *)&policy);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to set policy\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Save original ip address and netmask */
+ data_size = sizeof(manual_address);
+ ret = ip4_config2->get_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ &data_size, &orig_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to save original ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Set static ip and netmask */
+ memcpy(&manual_address.address, ip,
+ sizeof(struct efi_ipv4_address));
+ memcpy(&manual_address.subnet_mask, netmask,
+ sizeof(struct efi_ipv4_address));
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ sizeof(manual_address), &manual_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to get ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Try to set interface info, this should fail */
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_INTERFACEINFO, 0, NULL);
+ if (ret == EFI_SUCCESS) {
+ efi_st_error("Interface info is read-only\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Get ip address and netmask and check that they match with the previously set ones */
+ data_size = sizeof(manual_address);
+ ret = ip4_config2->get_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ &data_size, &manual_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to get ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+ if (memcmp(ip, &manual_address.address,
+ sizeof(struct efi_ipv4_address)) ||
+ memcmp(netmask, &manual_address.subnet_mask,
+ sizeof(struct efi_ipv4_address))) {
+ efi_st_error("Ip address mismatch\n");
+ return EFI_ST_FAILURE;
+ }
+
+ /* Restore original ip address and netmask */
+ ret = ip4_config2->set_data(ip4_config2, EFI_IP4_CONFIG2_DATA_TYPE_MANUAL_ADDRESS,
+ sizeof(orig_address), &orig_address);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("Failed to restore original ip address and netmask\n");
+ return EFI_ST_FAILURE;
+ }
+
+ efi_st_printf("Efi ipconfig test execute succeeded\n");
+ return EFI_ST_SUCCESS;
+}
+
+/*
+ * Tear down unit test.
+ *
+ * Return: EFI_ST_SUCCESS for success
+ */
+static int teardown(void)
+{
+ int exit_status = EFI_ST_SUCCESS;
+
+ return exit_status;
+}
+
+EFI_UNIT_TEST(ipconfig) = {
+ .name = "IPv4 config2 protocol",
+ .phase = EFI_EXECUTE_BEFORE_BOOTTIME_EXIT,
+ .setup = setup,
+ .execute = execute,
+ .teardown = teardown,
+#ifdef CONFIG_SANDBOX
+ /*
+ * Running this test on the sandbox requires setting environment
+ * variable ethact to a network interface connected to a DHCP server and
+ * ethrotate to 'no'.
+ */
+ .on_request = true,
+#endif
+};
--
2.43.0
More information about the U-Boot
mailing list