[resend v2 17/19] drivers: mtd: nand: Enabled Kconfig and Makefile for Cadence-SPL
dinesh.maniyam at intel.com
dinesh.maniyam at intel.com
Thu Dec 5 10:23:13 CET 2024
From: Dinesh Maniyam <dinesh.maniyam at intel.com>
Enable the Kconfig and Makefile for the Cadence-Nand
SPL support in agilex5 family device.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam at intel.com>
---
v2:
- remove the "this patch is to" commit phrases
---
---
drivers/mtd/nand/raw/Kconfig | 7 +++++++
drivers/mtd/nand/raw/Makefile | 1 +
2 files changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 709c85c6e5..a9515c7b74 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -801,6 +801,13 @@ config SPL_NAND_AM33XX_BCH
so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
SPL-NAND driver with software ECC correction support.
+config SPL_NAND_CADENCE
+ bool "Support Cadence NAND controller for SPL"
+ depends on SPL_NAND_SUPPORT
+ help
+ This is a small implementation of the Cadence NAND controller
+ for use on SPL.
+
config SPL_NAND_DENALI
bool "Support Denali NAND controller for SPL"
depends on SPL_NAND_SUPPORT
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 4ad1a2037f..58fde3272f 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -10,6 +10,7 @@ NORMAL_DRIVERS=y
endif
obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
+obj-$(CONFIG_SPL_NAND_CADENCE) += cadence_spl.o
obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
--
2.19.0
More information about the U-Boot
mailing list