[PATCH] video: zynqmp: Add support for reset

[Michal Simek]

In Kria SOM configuration DP is under reset and access to DP is causing
hang that's why call reset at probe to avoid this situation.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 drivers/video/zynqmp/zynqmp_dpsub.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/video/zynqmp/zynqmp_dpsub.c b/drivers/video/zynqmp/zynqmp_dpsub.c
index 76abfeac4433..52af23c3c835 100644
--- a/drivers/video/zynqmp/zynqmp_dpsub.c
+++ b/drivers/video/zynqmp/zynqmp_dpsub.c
@@ -11,6 +11,7 @@
 #include <dm.h>
 #include <errno.h>
 #include <generic-phy.h>
+#include <reset.h>
 #include <stdlib.h>
 #include <video.h>
 #include <wait_bit.h>
@@ -2093,10 +2094,15 @@ static int zynqmp_dpsub_probe(struct udevice *dev)
 {
 	struct video_priv *uc_priv = dev_get_uclass_priv(dev);
 	struct zynqmp_dpsub_priv *priv = dev_get_priv(dev);
+	struct reset_ctl_bulk resets;
 	struct clk clk;
 	int ret;
 	int mode = RGBA8888;
 
+	ret = reset_get_bulk(dev, &resets);
+	if (!ret)
+		reset_deassert_bulk(&resets);
+
 	ret = clk_get_by_name(dev, "dp_apb_clk", &clk);
 	if (ret < 0) {
 		dev_err(dev, "failed to get clock\n");
-- 
2.43.0