[PATCH v2 5/7] efi_loader: Move the fallback code from efi_run_image()
Simon Glass
sjg at chromium.org
Thu Dec 12 14:45:16 CET 2024
Hi Ilias,
On Thu, 12 Dec 2024 at 00:53, Ilias Apalodimas
<ilias.apalodimas at linaro.org> wrote:
>
> Checkpatch has errors on this. Please have a look
It's the brackets not matching up because of
efi_uninstall_multiple_protocol_interfaces() being so long. It also
complains about possible blank lines at the end of the file, but that
isn't correct.
>
> Also for some reason is fails to apply after patch 4.
It is based on top of the other series (confusion between pointers and
addresses). I can send it independently if you'd like to apply this
one first.
>
> Thanks
> /Ilias
>
>
> On Thu, 12 Dec 2024 at 00:38, Simon Glass <sjg at chromium.org> wrote:
> >
> > This code is only needed if an invalid image/device path is passed in.
> > Move the code out to a caller where this can be dealt with. The normal
> > flow will provide these parameters.
> >
> > Signed-off-by: Simon Glass <sjg at chromium.org>
> > ---
> >
> > (no changes since v1)
> >
> > lib/efi_loader/efi_bootbin.c | 103 ++++++++++++++++-------------------
> > 1 file changed, 48 insertions(+), 55 deletions(-)
> >
> > diff --git a/lib/efi_loader/efi_bootbin.c b/lib/efi_loader/efi_bootbin.c
> > index 8ebd48547cb..582b2745ced 100644
> > --- a/lib/efi_loader/efi_bootbin.c
> > +++ b/lib/efi_loader/efi_bootbin.c
> > @@ -147,36 +147,13 @@ static efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size,
> > struct efi_device_path *device,
> > struct efi_device_path *image)
> > {
> > - efi_handle_t mem_handle = NULL, handle;
> > - struct efi_device_path *file_path = NULL;
> > - struct efi_device_path *msg_path;
> > + efi_handle_t handle;
> > + struct efi_device_path *msg_path, *file_path;
> > efi_status_t ret;
> > u16 *load_options;
> >
> > - if (!device || !image) {
> > - log_debug("Not loaded from disk\n");
> > - /*
> > - * Special case for efi payload not loaded from disk,
> > - * such as 'bootefi hello' or for example payload
> > - * loaded directly into memory via JTAG, etc:
> > - */
> > - file_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE,
> > - source_buffer, source_size);
> > - /*
> > - * Make sure that device for device_path exist
> > - * in load_image(). Otherwise, shell and grub will fail.
> > - */
> > - ret = efi_install_multiple_protocol_interfaces(&mem_handle,
> > - &efi_guid_device_path,
> > - file_path, NULL);
> > - if (ret != EFI_SUCCESS)
> > - goto out;
> > - msg_path = file_path;
> > - } else {
> > - file_path = efi_dp_concat(device, image, 0);
> > - msg_path = image;
> > - log_debug("Loaded from disk\n");
> > - }
> > + file_path = efi_dp_concat(device, image, 0);
> > + msg_path = image;
> >
> > log_info("Booting %pD\n", msg_path);
> >
> > @@ -195,36 +172,13 @@ static efi_status_t efi_run_image(void *source_buffer, efi_uintn_t source_size,
> > ret = do_bootefi_exec(handle, load_options);
> >
> > out:
> > - if (mem_handle) {
> > - efi_status_t r;
> > -
> > - r = efi_uninstall_multiple_protocol_interfaces(
> > - mem_handle, &efi_guid_device_path, file_path, NULL);
> > - if (r != EFI_SUCCESS)
> > - log_err("Uninstalling protocol interfaces failed\n");
> > - }
> > - efi_free_pool(file_path);
> >
> > return ret;
> > }
> >
> > -/**
> > - * efi_binary_run_() - run loaded UEFI image
> > - *
> > - * @image_ptr: memory address of the UEFI image
> > - * @size: size of the UEFI image
> > - * @fdt: device-tree
> > - * @device: EFI device-path
> > - * @image: EFI image-path
> > - *
> > - * Execute an EFI binary image loaded at @image.
> > - * @size may be zero if the binary is loaded with U-Boot load command.
> > - *
> > - * Return: status code
> > - */
> > -efi_status_t efi_binary_run_(void *image_ptr, size_t size, void *fdt,
> > - struct efi_device_path *device,
> > - struct efi_device_path *image)
> > +static efi_status_t efi_binary_run_(void *image_ptr, size_t size, void *fdt,
> > + struct efi_device_path *device,
> > + struct efi_device_path *image)
> > {
> > efi_status_t ret;
> >
> > @@ -257,6 +211,45 @@ efi_status_t efi_binary_run_(void *image_ptr, size_t size, void *fdt,
> > */
> > efi_status_t efi_binary_run(void *image, size_t size, void *fdt)
> > {
> > - return efi_binary_run_(image, size, fdt, bootefi_device_path,
> > - bootefi_image_path);
> > + efi_handle_t mem_handle = NULL;
> > + struct efi_device_path *file_path = NULL;
> > + efi_status_t ret;
> > +
> > + if (!bootefi_device_path || !bootefi_image_path) {
> > + log_debug("Not loaded from disk\n");
> > + /*
> > + * Special case for efi payload not loaded from disk,
> > + * such as 'bootefi hello' or for example payload
> > + * loaded directly into memory via JTAG, etc:
> > + */
> > + file_path = efi_dp_from_mem(EFI_RESERVED_MEMORY_TYPE, image,
> > + size);
> > + /*
> > + * Make sure that device for device_path exist
> > + * in load_image(). Otherwise, shell and grub will fail.
> > + */
> > + ret = efi_install_multiple_protocol_interfaces(&mem_handle,
> > + &efi_guid_device_path,
> > + file_path, NULL);
> > + if (ret != EFI_SUCCESS)
> > + goto out;
> > + } else {
> > + log_debug("Loaded from disk\n");
> > + }
> > +
> > + ret = efi_binary_run_(image, size, fdt, bootefi_device_path,
> > + bootefi_image_path);
> > +out:
> > + if (mem_handle) {
> > + efi_status_t r;
> > +
> > + r = efi_uninstall_multiple_protocol_interfaces(mem_handle,
> > + &efi_guid_device_path, file_path, NULL);
> > + if (r != EFI_SUCCESS)
> > + log_err("Uninstalling protocol interfaces failed\n");
> > + }
> > + efi_free_pool(file_path);
> > +
> > + return ret;
> > }
> > +
> > --
> > 2.34.1
> >
More information about the U-Boot
mailing list