[PATCH v5 0/9] Inline ECC Series
Santhosh Kumar K
s-k6 at ti.com
Fri Dec 13 11:31:20 CET 2024
Hello,
This series is to:
Add support for Inline ECC in DDR for AM64X, AM62X, AM62AX, AM62PX,
J721S2 and J784S4 devices.
(1/9) Add ss_cfg reg entry
(2/9) Enable ECC priming with BIST engine
(3/9) Add a function to store base address and size of RAM's banks
in a 64-bit device private data
(4/9) Setup the ECC region start and range
(5/9) Enable ECC 1-bit error, 2-bit error and multiple-bit
error interrupts
(6/9) Add CONFIG_K3_INLINE_ECC
(7/9) Remove 'ti,ecc-enable' flag
(8/9) Set default NR_DRAM_BANKS to 2
(9/9) Pull Redundant DDR functions to a common location and Fixup
DDR size when ECC is enabled
Changes since v4:
1. Make dram_init and dram_init_banksize weak at mach-k3/ and define at
board/ti/
2. Remove 'ti,ecc-enable' flag
3. Minor changes like patch order change (8/8 in v4 to 1/9 in v5),
use 'u64'
v4: https://lore.kernel.org/u-boot/20241021044024.835846-1-s-k6@ti.com/
Changes since v3:
Pull redundant DDR functions to arch/arm/mach-k3/*
v3: https://lore.kernel.org/all/20240523050430.455201-1-s-k6@ti.com/
Changes since v2:
Removed 'default n' in Kconfig as that is default setting
v2: https://lore.kernel.org/u-boot/20240510084707.1903133-1-s-k6@ti.com/
Changes since v1:
Add support for J7* devices.
v1: https://lore.kernel.org/u-boot/20240131060213.1128024-1-s-k6@ti.com/
Test Results: https://gist.github.com/santhosh21/88de920771ed2efa0463a5a367cb8d7b
Thanks and Regards,
Santhosh.
Georgi Vlaev (1):
ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming
Neha Malcom Francis (2):
drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC
arm: mach-k3: Set NR_DRAM_BANKS to 2
Santhosh Kumar K (6):
arm: dts: k3-*-ddr: Add ss_cfg reg entry
ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve
'calculations restricted to 32 bits' issue
ram: k3-ddrss: Setup ECC region start and range
ram: k3-ddrss: Enable ECC interrupts
ram: k3-ddrss: Remove 'ti,ecc-enable' support
board: ti: Pull redundant DDR functions to a common location and Fixup
DDR size when ECC is enabled
arch/arm/dts/k3-am62a-ddr.dtsi | 7 +-
arch/arm/dts/k3-j721s2-ddr.dtsi | 12 +-
arch/arm/dts/k3-j784s4-ddr.dtsi | 24 ++-
arch/arm/mach-k3/Kconfig | 3 +
arch/arm/mach-k3/Makefile | 2 +-
arch/arm/mach-k3/include/mach/k3-ddr.h | 15 ++
arch/arm/mach-k3/k3-ddr.c | 72 ++++++++
board/ti/am62ax/evm.c | 17 +-
board/ti/am62px/evm.c | 17 +-
board/ti/am62x/evm.c | 63 +------
board/ti/am64x/evm.c | 73 +--------
board/ti/am65x/evm.c | 29 +---
board/ti/common/Makefile | 1 +
board/ti/common/k3-ddr.c | 33 ++++
board/ti/common/k3-ddr.h | 12 ++
board/ti/j721e/evm.c | 29 +---
board/ti/j721s2/evm.c | 35 ++--
board/ti/j784s4/evm.c | 17 +-
configs/am62ax_evm_a53_defconfig | 1 -
configs/am62px_evm_a53_defconfig | 1 -
configs/am62x_evm_a53_defconfig | 1 -
configs/am62x_evm_r5_defconfig | 1 -
configs/am64x_evm_a53_defconfig | 1 -
configs/am64x_evm_r5_defconfig | 1 -
configs/am65x_evm_a53_defconfig | 1 -
configs/am65x_evm_r5_defconfig | 1 -
configs/am65x_evm_r5_usbdfu_defconfig | 1 -
configs/am65x_evm_r5_usbmsc_defconfig | 1 -
configs/j7200_evm_a72_defconfig | 1 -
configs/j721e_evm_a72_defconfig | 1 -
configs/j721s2_evm_a72_defconfig | 1 -
configs/j722s_evm_a53_defconfig | 1 -
configs/j784s4_evm_a72_defconfig | 1 -
drivers/ram/Kconfig | 10 ++
drivers/ram/k3-ddrss/k3-ddrss.c | 219 +++++++++++++++++++++----
35 files changed, 417 insertions(+), 288 deletions(-)
create mode 100644 arch/arm/mach-k3/include/mach/k3-ddr.h
create mode 100644 arch/arm/mach-k3/k3-ddr.c
create mode 100644 board/ti/common/k3-ddr.c
create mode 100644 board/ti/common/k3-ddr.h
--
2.34.1
More information about the U-Boot
mailing list