[PATCH v5 3/9] ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue
Santhosh Kumar K
s-k6 at ti.com
Fri Dec 13 11:31:23 CET 2024
As R5 is a 32 bit processor, the RAM banks' base and size calculation
is restricted to 32 bits, which results in wrong values if bank's base
is greater than 32 bits or bank's size is greater than or equal to 4GB.
So, add k3_ddrss_ddr_bank_base_size_calc() to get the base address and
size of RAM's banks from the device tree memory node, and store in a
64 bit device private data which can be used for ECC reserved memory
calculation, Setting ECC range and Fixing up bank size in device tree
when ECC is enabled.
Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
---
drivers/ram/k3-ddrss/k3-ddrss.c | 72 ++++++++++++++++++++++++++-------
1 file changed, 57 insertions(+), 15 deletions(-)
diff --git a/drivers/ram/k3-ddrss/k3-ddrss.c b/drivers/ram/k3-ddrss/k3-ddrss.c
index c29eec62bd8f..29ce53453c1f 100644
--- a/drivers/ram/k3-ddrss/k3-ddrss.c
+++ b/drivers/ram/k3-ddrss/k3-ddrss.c
@@ -147,6 +147,9 @@ struct k3_ddrss_desc {
struct k3_ddrss_ecc_region ecc_regions[K3_DDRSS_MAX_ECC_REGIONS];
u64 ecc_reserved_space;
bool ti_ecc_enabled;
+ u64 ddr_bank_base[CONFIG_NR_DRAM_BANKS];
+ u64 ddr_bank_size[CONFIG_NR_DRAM_BANKS];
+ u64 ddr_ram_size;
};
struct reginitdata {
@@ -663,11 +666,54 @@ static void k3_ddrss_lpddr4_preload_full_mem(struct k3_ddrss_desc *ddrss,
printf("ECC: priming DDR completed in %lu msec\n", get_timer(done));
}
+static void k3_ddrss_ddr_bank_base_size_calc(struct k3_ddrss_desc *ddrss)
+{
+ int bank, na, ns, len, parent;
+ const fdt32_t *ptr, *end;
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ ddrss->ddr_bank_base[bank] = 0;
+ ddrss->ddr_bank_size[bank] = 0;
+ }
+
+ ofnode mem = ofnode_null();
+
+ do {
+ mem = ofnode_by_prop_value(mem, "device_type", "memory", 7);
+ } while (!ofnode_is_enabled(mem));
+
+ const void *fdt = ofnode_to_fdt(mem);
+ int node = ofnode_to_offset(mem);
+ const char *property = "reg";
+
+ parent = fdt_parent_offset(fdt, node);
+ na = fdt_address_cells(fdt, parent);
+ ns = fdt_size_cells(fdt, parent);
+ ptr = fdt_getprop(fdt, node, property, &len);
+ end = ptr + len / sizeof(*ptr);
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
+ if (ptr + na + ns <= end) {
+ if (CONFIG_IS_ENABLED(OF_TRANSLATE))
+ ddrss->ddr_bank_base[bank] = fdt_translate_address(fdt, node, ptr);
+ else
+ ddrss->ddr_bank_base[bank] = fdtdec_get_number(ptr, na);
+
+ ddrss->ddr_bank_size[bank] = fdtdec_get_number(&ptr[na], ns);
+ }
+
+ ptr += na + ns;
+ }
+
+ for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++)
+ ddrss->ddr_ram_size += ddrss->ddr_bank_size[bank];
+}
+
static void k3_ddrss_lpddr4_ecc_calc_reserved_mem(struct k3_ddrss_desc *ddrss)
{
fdtdec_setup_mem_size_base_lowest();
- ddrss->ecc_reserved_space = gd->ram_size;
+ ddrss->ecc_reserved_space = ddrss->ddr_ram_size;
do_div(ddrss->ecc_reserved_space, 9);
/* Round to clean number */
@@ -691,7 +737,7 @@ static void k3_ddrss_lpddr4_ecc_init(struct k3_ddrss_desc *ddrss)
/* Preload the full memory with 0's using the BIST engine of
* the LPDDR4 controller.
*/
- k3_ddrss_lpddr4_preload_full_mem(ddrss, gd->ram_size, 0);
+ k3_ddrss_lpddr4_preload_full_mem(ddrss, ddrss->ddr_ram_size, 0);
/* Clear Error Count Register */
writel(0x1, base + DDRSS_ECC_1B_ERR_CNT_REG);
@@ -736,6 +782,8 @@ static int k3_ddrss_probe(struct udevice *dev)
k3_lpddr4_start(ddrss);
+ k3_ddrss_ddr_bank_base_size_calc(ddrss);
+
if (ddrss->ti_ecc_enabled) {
if (!ddrss->ddrss_ss_cfg) {
printf("%s: ss_cfg is required if ecc is enabled but not provided.",
@@ -756,30 +804,24 @@ static int k3_ddrss_probe(struct udevice *dev)
int k3_ddrss_ddr_fdt_fixup(struct udevice *dev, void *blob, struct bd_info *bd)
{
- struct k3_ddrss_desc *ddrss = dev_get_priv(dev);
- u64 start[CONFIG_NR_DRAM_BANKS];
- u64 size[CONFIG_NR_DRAM_BANKS];
int bank;
+ struct k3_ddrss_desc *ddrss = dev_get_priv(dev);
if (ddrss->ecc_reserved_space == 0)
return 0;
for (bank = CONFIG_NR_DRAM_BANKS - 1; bank >= 0; bank--) {
- if (ddrss->ecc_reserved_space > bd->bi_dram[bank].size) {
- ddrss->ecc_reserved_space -= bd->bi_dram[bank].size;
- bd->bi_dram[bank].size = 0;
+ if (ddrss->ecc_reserved_space > ddrss->ddr_bank_size[bank]) {
+ ddrss->ecc_reserved_space -= ddrss->ddr_bank_size[bank];
+ ddrss->ddr_bank_size[bank] = 0;
} else {
- bd->bi_dram[bank].size -= ddrss->ecc_reserved_space;
+ ddrss->ddr_bank_size[bank] -= ddrss->ecc_reserved_space;
break;
}
}
- for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
- start[bank] = bd->bi_dram[bank].start;
- size[bank] = bd->bi_dram[bank].size;
- }
-
- return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS);
+ return fdt_fixup_memory_banks(blob, ddrss->ddr_bank_base,
+ ddrss->ddr_bank_size, CONFIG_NR_DRAM_BANKS);
}
static int k3_ddrss_get_info(struct udevice *dev, struct ram_info *info)
--
2.34.1
More information about the U-Boot
mailing list