[PATCH v6 0/2] riscv: spacemit: add support for bananapi-f3

[Huan Zhou]

On Sat, Dec 14, 2024 at 03:19:58PM +0800, Yixun Lan wrote:
> Hi Huan:
> 
> On 14:44 Sat 14 Dec     , Huan Zhou wrote:
> > Banana Pi F3 board is a industrial grade RISC-V development board, it
> > design with SpacemiT K1 8 core RISC-V chip, CPU integrates 2.0 TOPs AI
> > computing power. 4G DDR and 16G eMMC onboard. 2x GbE Ethernet port, 4x USB
> > 3.0 and PCIe for M.2 interface, support HDMI and Dual MIPI-CSI Camera.
> > 
> > This patch introduces fundamental support for the Banana Pi F3 board,
> > encompassing UART, CPU, and PLIC support. This ensures that U-Boot can
> > operate in serial console mode.
> > 
> > Changes in v6:
> > - Rebase the patch to the latest branch.
> > - Add small comment in bananapi-f3.h
> > - Add tag in previous patch(e.g reviewed by or tested by)
> > - Add fastboot burn procedure in doc.
> > - Link to v5: https://lore.kernel.org/r/20241209-pickup-bpif3-v5-0-92f801b7c6c1@gmail.com
> > 
> > Changes in v5:
> > - Formal the name from Bananapif3 -> Banana Pi BPI-F3
> > - Trailing whitespace
> > - New blank line at EOF in spacemit/index.rst
> > - Link to v4: https://lore.kernel.org/r/20241129-pickup-bpif3-v4-0-e99fabf66e33@gmail.com
> > 
> > Changes in v4:
> > - Change uart compatible in k1.dtsi in v3, cause related driver in not implemented in u-boot.
> > - Update doc, show how to validate the patch.
> > - Update maintainer, remove kongyang cause he lefted.
> > - Link to v3: https://lore.kernel.org/r/20241114-pickup-bpif3-v3-0-98a45802ab79@gmail.com
> > 
> > Changes in v3:
> > - Add base commit
> > - Clear redifinition warning while building in UART_IIR_ID
> > - Change underscore to dash in bananapi*f3
> > - Update maintainer
> > - link to v2 https://lore.kernel.org/u-boot/20240718043329.1500-1-seashell11234455@gmail.com/
> > 
> > Changes in v2:
> > - Change license to GPL-2.0-or-later
> > - Add memory node for dts
> > - Add ft_board_setup function for kernel memory init
> > - Use default prompt
> > - links to v1 https://lore.kernel.org/u-boot/20240714150828.736-1-seashell11234455@gmail.com/
> > 
> > Signed-off-by: Huan Zhou <pericycle.cc at gmail.com>
> > Signed-off-by: Kongyang Liu <seashell11234455 at gmail.com>
> ..
> > Tested-by: Marcel Ziswiler <marcel at ziswiler.com>
> it's wrong to add Marcel's tag to the cover letter here,
> instead, you need to apply to patch [1,2] as he gave for whole series
> 
mb fixit, thx ;)
> also for this series
> 
> Reviewed-by: Yixun Lan <dlan at gentoo.org>
> 
> > ---
> > Kongyang Liu (2):
> >       riscv: spacemit: bananapi_f3: initial support added
> >       doc: spacemit: bananapi_f3: document Banana Pi F3 board
> > 
> >  arch/riscv/Kconfig                     |   5 +
> >  arch/riscv/cpu/k1/Kconfig              |  18 ++
> >  arch/riscv/cpu/k1/Makefile             |   6 +
> >  arch/riscv/cpu/k1/cpu.c                |   9 +
> >  arch/riscv/cpu/k1/dram.c               |  54 ++++
> >  arch/riscv/dts/Makefile                |   2 +
> >  arch/riscv/dts/k1-bananapi-f3.dts      |  25 ++
> >  arch/riscv/dts/k1.dtsi                 | 459 +++++++++++++++++++++++++++++++++
> >  board/spacemit/bananapi-f3/Kconfig     |  25 ++
> >  board/spacemit/bananapi-f3/MAINTAINERS |   6 +
> >  board/spacemit/bananapi-f3/Makefile    |   5 +
> >  board/spacemit/bananapi-f3/board.c     |   9 +
> >  configs/bananapi-f3_defconfig          |  20 ++
> >  doc/board/index.rst                    |   1 +
> >  doc/board/spacemit/bananapi-f3.rst     | 106 ++++++++
> >  doc/board/spacemit/index.rst           |   9 +
> >  include/configs/bananapi-f3.h          |  13 +
> >  17 files changed, 772 insertions(+)
> > ---
> > base-commit: b0b6d0c87082813aada4c052a8b4e20c257dbbda
> > change-id: 20241112-pickup-bpif3-245ab208b9a4
> > 
> > Best regards,
> > -- 
> > Huan Zhou <pericycle.cc at gmail.com>
> > 
> 
> -- 
> Yixun Lan (dlan)
> Gentoo Linux Developer
> GPG Key ID AABEFD55