[PATCH v5 7/8] dts: starfive: Add JH7110 Cadence USB dts node

[E Shattow]

On 10/11/24 20:13, Minda Chen wrote:
> Add Jh7110 Cadence USB dts node, Visionfive2 default setting
> is USB 2.0 device.
> 
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>   .../dts/jh7110-starfive-visionfive-2.dtsi     |  5 ++
>   arch/riscv/dts/jh7110.dtsi                    | 53 +++++++++++++++++++
>   2 files changed, 58 insertions(+)
> 
> diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> index e11babc1cde..f62582cf93e 100644
> --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi
> @@ -378,3 +378,8 @@
>   		};
>   	};
>   };
> +
> +&usb0 {
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi
> index 2cdc683d49b..c770da2fedd 100644
> --- a/arch/riscv/dts/jh7110.dtsi
> +++ b/arch/riscv/dts/jh7110.dtsi
> @@ -371,6 +371,59 @@
>   			status = "disabled";
>   		};
>   
> +		usb0: usb at 10100000 {
> +			compatible = "starfive,jh7110-usb";
> +			ranges = <0x0 0x0 0x10100000 0x100000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			starfive,stg-syscon = <&stg_syscon 0x4>;
> +			clocks = <&stgcrg JH7110_STGCLK_USB_LPM>,
> +				 <&stgcrg JH7110_STGCLK_USB_STB>,
> +				 <&stgcrg JH7110_STGCLK_USB_APB>,
> +				 <&stgcrg JH7110_STGCLK_USB_AXI>,
> +				 <&stgcrg JH7110_STGCLK_USB_UTMI_APB>;
> +			clock-names = "lpm", "stb", "apb", "axi", "utmi_apb";
> +			resets = <&stgcrg JH7110_STGRST_USB_PWRUP>,
> +				 <&stgcrg JH7110_STGRST_USB_APB>,
> +				 <&stgcrg JH7110_STGRST_USB_AXI>,
> +				 <&stgcrg JH7110_STGRST_USB_UTMI_APB>;
> +			reset-names = "pwrup", "apb", "axi", "utmi_apb";
> +			status = "disabled";
> +
> +			usb_cdns3: usb at 0 {
> +				compatible = "cdns,usb3";
> +				reg = <0x0 0x10000>,
> +				      <0x10000 0x10000>,
> +				      <0x20000 0x10000>;
> +				reg-names = "otg", "xhci", "dev";
> +				interrupts = <100>, <108>, <110>;
> +				interrupt-names = "host", "peripheral", "otg";
> +				phys = <&usbphy0>;
> +				phy-names = "cdns3,usb2-phy";
> +			};
> +		};
> +
> +		usbphy0: phy at 10200000 {
> +			compatible = "starfive,jh7110-usb-phy";
> +			reg = <0x0 0x10200000 0x0 0x10000>;
> +			clocks = <&syscrg JH7110_SYSCLK_USB_125M>,
> +				 <&stgcrg JH7110_STGCLK_USB_APP_125>;
> +			clock-names = "125m", "app_125m";
> +			#phy-cells = <0>;
> +		};
> +
> +		pciephy0: phy at 10210000 {
> +			compatible = "starfive,jh7110-pcie-phy";
> +			reg = <0x0 0x10210000 0x0 0x10000>;
> +			#phy-cells = <0>;
> +		};
> +
> +		pciephy1: phy at 10220000 {
> +			compatible = "starfive,jh7110-pcie-phy";
> +			reg = <0x0 0x10220000 0x0 0x10000>;
> +			#phy-cells = <0>;
> +		};
> +
>   		stgcrg: clock-controller at 10230000 {
>   			compatible = "starfive,jh7110-stgcrg";
>   			reg = <0x0 0x10230000 0x0 0x10000>;

Drop this patch. Prefer instead to depend on "Support OF_UPSTREAM for 
StarFive JH7110" series. I have a couple of patches into upstream Linux 
riscv-dt-for-next with the vbus GPIO assignment and setting host mode 
that should land with Linux 6.14, for Mars and for Star64 boards.

-E