[REGRESSION] Out of memory error: unable to boot on imx8mp/imx8mm

[João Paulo Gonçalves]

Hi Sughosh,

> Can you show the output of bdinfo. And also print the value of ram_top
> while booting the board.
>

Below are ram_top and bdinfo:

U-Boot 2025.01-rc4-00025-g4ff8ecd9b14e-dirty (Dec 16 2024 - 11:21:18 -0300)

CPU:   Freescale i.MX8MP[8] rev1.1 1600 MHz (running at 1200 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 51C
Reset cause: POR
DRAM:  Ram top: FFFFFFFF
8 GiB
...
Verdin iMX8MP # bdinfo
boot_params = 0x0000000000000000
DRAM bank   = 0x0000000000000000
-> start    = 0x0000000040000000
-> size     = 0x00000000c0000000
DRAM bank   = 0x0000000000000001
-> start    = 0x0000000100000000
-> size     = 0x0000000140000000
flashstart  = 0x0000000000000000
flashsize   = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate    = 115200 bps
relocaddr   = 0x00000000ffece000
reloc off   = 0x00000000bfcce000
Build       = 64-bit
current eth = ethernet at 30bf0000
ethaddr     = 6e:79:12:b6:72:24
IP addr     = <NULL>
fdt_blob    = 0x00000000ffab8450
lmb_dump_all:
 memory.count = 0x1
 memory[0]      [0x40000000-0x23fffffff], 0x200000000 bytes, flags: none
 reserved.count = 0x1
 reserved[0]    [0xffffffff-0x23fffffff], 0x140000001 bytes, flags: no-overwrite
devicetree  = separate
arch_number = 0x0000000000000000
TLB addr    = 0x00000000fffd0000
irq_sp      = 0x00000000ffab8440
sp start    = 0x00000000ffab8440
Early malloc usage: d620 / 10000


Best Regards,
João Paulo Gonçalves