[PATCH v4 1/2] cmd: Add support for optee commands

[Jerome Forissier]

Hi Venkatesh,

On 12/17/24 04:59, Venkatesh Yadav Abbarapu wrote:
> Add the basic 'hello world ta' command which increment
> of the value passed. This provides easy test for
> establishing a session with OP-TEE TA and verify.
> 
> It includes following "hello world ta" subcommands:
> optee hello; default value '0' is passed and gets incremented.
> optee hello <value>; value to increment via OP-TEE HELLO
> WORLD TA.
> 
> To enable the OP-TEE side HELLO WORLD example please refer
> https://optee.readthedocs.io/en/latest/building/gits/optee_examples/optee_examples.html
> 
> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu at amd.com>
> ---
>  cmd/Kconfig  |  6 ++++
>  cmd/Makefile |  1 +
>  cmd/optee.c  | 77 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 84 insertions(+)
>  create mode 100644 cmd/optee.c
> 
> diff --git a/cmd/Kconfig b/cmd/Kconfig
> index 1d7ddb4ed36..4b33468891e 100644
> --- a/cmd/Kconfig
> +++ b/cmd/Kconfig
> @@ -1446,6 +1446,12 @@ config CMD_OPTEE_RPMB
>  	  in the Replay Protection Memory Block partition in eMMC by
>  	  using Persistent Objects in OPTEE
>  
> +config CMD_OPTEE
> +	bool "Enable OP-TEE commands"
> +	depends on OPTEE
> +	help
> +	 OP-TEE commands support.
> +
>  config CMD_MTD
>  	bool "mtd"
>  	depends on MTD
> diff --git a/cmd/Makefile b/cmd/Makefile
> index d1f369deec0..533d0f6a1be 100644
> --- a/cmd/Makefile
> +++ b/cmd/Makefile
> @@ -118,6 +118,7 @@ obj-$(CONFIG_CMD_PAUSE) += pause.o
>  obj-$(CONFIG_CMD_SLEEP) += sleep.o
>  obj-$(CONFIG_CMD_MMC) += mmc.o
>  obj-$(CONFIG_CMD_OPTEE_RPMB) += optee_rpmb.o
> +obj-$(CONFIG_CMD_OPTEE) += optee.o
>  obj-$(CONFIG_CMD_MP) += mp.o
>  obj-$(CONFIG_CMD_MTD) += mtd.o
>  obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
> diff --git a/cmd/optee.c b/cmd/optee.c
> new file mode 100644
> index 00000000000..39947c00145
> --- /dev/null
> +++ b/cmd/optee.c
> @@ -0,0 +1,77 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * (C) Copyright 2024, Advanced Micro Devices, Inc.
> + */
> +#include <command.h>
> +#include <errno.h>
> +#include <tee.h>
> +#include <vsprintf.h>
> +
> +#define TA_HELLO_WORLD_CMD_INC_VALUE 0
> +/* This needs to match the UUID of the Hello World TA. */
> +#define TA_HELLO_WORLD_UUID \
> +	{ 0x8aaaf200, 0x2450, 0x11e4, \
> +	{ 0xab, 0xe2, 0x00, 0x02, 0xa5, 0xd5, 0xc5, 0x1b} }
> +
> +static int hello_world_ta(unsigned int value)
> +{
> +	const struct tee_optee_ta_uuid uuid = TA_HELLO_WORLD_UUID;
> +	struct tee_open_session_arg session_arg;
> +	struct udevice *tee = NULL;
> +	struct tee_invoke_arg arg;
> +	struct tee_param param[2];
> +	int rc;
> +
> +	printf("The Hello World TA is going to be called\n");

I would remove this, and replace with "Calling TA" -- see below.

> +
> +	tee = tee_find_device(tee, NULL, NULL, NULL);
> +	if (!tee)
> +		return -ENODEV;
> +
> +	memset(&session_arg, 0, sizeof(session_arg));
> +	tee_optee_ta_uuid_to_octets(session_arg.uuid, &uuid);
> +	rc = tee_open_session(tee, &session_arg, 0, NULL);
> +	if (rc) {
> +		printf("tee_open_session(): failed(%d)\n", rc);
> +		return rc;
> +	}
> +
> +	arg.func = TA_HELLO_WORLD_CMD_INC_VALUE;
> +	arg.session = session_arg.session;
> +
> +	param[0].attr = TEE_PARAM_ATTR_TYPE_VALUE_INOUT;
> +	param[0].u.value.a = value;
> +
> +	tee_invoke_func(tee, &arg, 1, param);
> +
> +	printf("value: 0x%x TA value: 0x%x\n", value, (int)param[0].u.value.a);

I find "value" and "TA value" unclear. How about:

printf("Value before: 0x%x\n", (int)param[0].u.value.a);
printf("Calling TA\n");
tee_invoke_func(tee, &arg, 1, param);
printf("Value after: 0x%x\n", (int)param[0].u.value.a);

?

> +
> +	return tee_close_session(tee, session_arg.session);
> +}
> +
> +static int do_optee_hello_world_ta(struct cmd_tbl *cmdtp, int flag, int argc,
> +				   char * const argv[])
> +{
> +	int ret, value = 0;
> +
> +	if (strcmp(argv[1], NULL))
> +		value = hextoul(argv[1], NULL);
> +
> +	ret = hello_world_ta(value);
> +	if (ret)
> +		return CMD_RET_FAILURE;
> +
> +	return CMD_RET_SUCCESS;
> +}
> +
> +U_BOOT_LONGHELP(optee,
> +		"- commands can be verified on OP-TEE\n\n"
> +		"optee hello\n"
> +		"optee hello <value>\n"
> +		"\n"
> +		"With:\n"
> +		"\t<value>: integer value\n"
> +		);
> +
> +U_BOOT_CMD_WITH_SUBCMDS(optee, "OP-TEE commands", optee_help_text,
> +			U_BOOT_SUBCMD_MKENT(hello, 2, 1, do_optee_hello_world_ta));

Thanks,
-- 
Jerome