[PATCH 2/5] board_init_f(): use static calls
Jerome Forissier
jerome.forissier at linaro.org
Tue Dec 17 16:59:33 CET 2024
Make static calls instead of iterating over the init_sequence_f arrays.
Tested on a KV260 board (xilinx_zynqmp_kria_defconfig).
- With LTO enabled, the code size reported by bloat-o-meter is 1184
bytes less (-0.11%)
- With LTO disabled, the code is 592 bytes smaller (-0.05%)
- Execution time does not change in a noticeable way
Signed-off-by: Jerome Forissier <jerome.forissier at linaro.org>
---
common/board_f.c | 167 +++++++++++++++++++++++----------------------
include/initcall.h | 25 +++++++
2 files changed, 111 insertions(+), 81 deletions(-)
diff --git a/common/board_f.c b/common/board_f.c
index a4d8850cb7d..ba1af3d8055 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -38,6 +38,7 @@
#include <spl.h>
#include <status_led.h>
#include <sysreset.h>
+#include <time.h>
#include <timer.h>
#include <trace.h>
#include <upl.h>
@@ -870,58 +871,62 @@ static int initf_upl(void)
return 0;
}
-static const init_fnc_t init_sequence_f[] = {
- setup_mon_len,
- CONFIG_IS_ENABLED(OF_CONTROL, (fdtdec_setup,))
- CONFIG_IS_ENABLED(TRACE_EARLY, (trace_early_init,))
- initf_malloc,
- initf_upl,
- log_init,
- initf_bootstage, /* uses its own timer, so does not need DM */
- event_init,
- bloblist_maybe_init,
- setup_spl_handoff,
- CONFIG_IS_ENABLED(CONSOLE_RECORD_INIT_F, (console_record_init,))
- INITCALL_EVENT(EVT_FSP_INIT_F),
- arch_cpu_init, /* basic arch cpu dependent setup */
- mach_cpu_init, /* SoC/machine dependent CPU setup */
- initf_dm,
- CONFIG_IS_ENABLED(BOARD_EARLY_INIT_F, (board_early_init_f,))
+static int initcall_run_f(void)
+{
+ int ret = 0;
+
+ INITCALL(setup_mon_len);
+ CONFIG_IS_ENABLED(OF_CONTROL, (INITCALL(fdtdec_setup)));
+ CONFIG_IS_ENABLED(TRACE_EARLY, (INITCALL(trace_early_init)));
+ INITCALL(initf_malloc);
+ INITCALL(initf_upl);
+ INITCALL(log_init);
+ INITCALL(initf_bootstage); /* uses its own timer, so does not need DM */
+ INITCALL(event_init);
+ INITCALL(bloblist_maybe_init);
+ INITCALL(setup_spl_handoff);
+ CONFIG_IS_ENABLED(CONSOLE_RECORD_INIT_F,
+ (INITCALL(console_record_init);))
+ INITCALL_EVT(EVT_FSP_INIT_F);
+ INITCALL(arch_cpu_init); /* basic arch cpu dependent setup */
+ INITCALL(mach_cpu_init); /* SoC/machine dependent CPU setup */
+ INITCALL(initf_dm);
+ CONFIG_IS_ENABLED(BOARD_EARLY_INIT_F, (INITCALL(board_early_init_f);))
#if defined(CONFIG_PPC) || defined(CONFIG_SYS_FSL_CLK) || defined(CONFIG_M68K)
/* get CPU and bus clocks according to the environment variable */
- get_clocks, /* get CPU and bus clocks (etc.) */
+ INITCALL(get_clocks); /* get CPU and bus clocks (etc.) */
#endif
#if !defined(CONFIG_M68K) || (defined(CONFIG_M68K) && !defined(CONFIG_MCFTMR))
- timer_init, /* initialize timer */
+ INITCALL(timer_init); /* initialize timer */
#endif
- CONFIG_IS_ENABLED(BOARD_POSTCLK_INIT, (board_postclk_init,))
- env_init, /* initialize environment */
- init_baud_rate, /* initialze baudrate settings */
- serial_init, /* serial communications setup */
- console_init_f, /* stage 1 init of console */
- display_options, /* say that we are here */
- display_text_info, /* show debugging info if required */
- checkcpu,
- CONFIG_IS_ENABLED(SYSRESET, (print_resetinfo,))
+ CONFIG_IS_ENABLED(BOARD_POSTCLK_INIT,
+ (INITCALL(board_postclk_init);))
+ INITCALL(env_init); /* initialize environment */
+ INITCALL(init_baud_rate); /* initialze baudrate settings */
+ INITCALL(serial_init); /* serial communications setup */
+ INITCALL(console_init_f); /* stage 1 init of console */
+ INITCALL(display_options); /* say that we are here */
+ INITCALL(display_text_info); /* show debugging info if required */
+ INITCALL(checkcpu);
+ CONFIG_IS_ENABLED(SYSRESET, (INITCALL(print_resetinfo);))
/* display cpu info (and speed) */
- CONFIG_IS_ENABLED(DISPLAY_CPUINFO, (print_cpuinfo,))
- CONFIG_IS_ENABLED(DTB_RESELECT, (embedded_dtb_select,))
- CONFIG_IS_ENABLED(DISPLAY_BOARDINFO, (show_board_info,))
- INIT_FUNC_WATCHDOG_INIT
- INITCALL_EVENT(EVT_MISC_INIT_F),
- INIT_FUNC_WATCHDOG_RESET
- CONFIG_IS_ENABLED(SYS_I2C_LEGACY, (init_func_i2c,))
- announce_dram_init,
- dram_init, /* configure available RAM banks */
- CONFIG_IS_ENABLED(POST, (post_init_f,))
- INIT_FUNC_WATCHDOG_RESET
+ CONFIG_IS_ENABLED(DISPLAY_CPUINFO, (INITCALL(print_cpuinfo);))
+ CONFIG_IS_ENABLED(DTB_RESELECT, (INITCALL(embedded_dtb_select);))
+ CONFIG_IS_ENABLED(DISPLAY_BOARDINFO, (INITCALL(show_board_info);))
+ WATCHDOG_INIT();
+ INITCALL_EVT(EVT_MISC_INIT_F);
+ WATCHDOG_RESET();
+ CONFIG_IS_ENABLED(SYS_I2C_LEGACY, (INITCALL(init_func_i2c);))
+ INITCALL(announce_dram_init);
+ INITCALL(dram_init); /* configure available RAM banks */
+ CONFIG_IS_ENABLED(POST, (INITCALL(post_init_f);))
+ WATCHDOG_INIT();
#if defined(CFG_SYS_DRAM_TEST)
- testdram,
+ INITCALL(testdram);
#endif /* CFG_SYS_DRAM_TEST */
- INIT_FUNC_WATCHDOG_RESET
-
- CONFIG_IS_ENABLED(POST, (init_post,))
- INIT_FUNC_WATCHDOG_RESET
+ WATCHDOG_RESET();
+ CONFIG_IS_ENABLED(POST, (INITCALL(init_post);))
+ WATCHDOG_RESET();
/*
* Now that we have DRAM mapped and working, we can
* relocate the code and continue running from DRAM.
@@ -934,48 +939,48 @@ static const init_fnc_t init_sequence_f[] = {
* - monitor code
* - board info struct
*/
- setup_dest_addr,
+ INITCALL(setup_dest_addr);
#if defined(CONFIG_OF_BOARD_FIXUP) && !defined(CONFIG_OF_INITIAL_DTB_READONLY)
- fix_fdt,
+ INITCALL(fix_fdt);
#endif
#ifdef CFG_PRAM
- reserve_pram,
+ INITCALL(reserve_pram);
#endif
- reserve_round_4k,
- setup_relocaddr_from_bloblist,
- arch_reserve_mmu,
- reserve_video,
- reserve_trace,
- reserve_uboot,
- reserve_malloc,
- reserve_board,
- reserve_global_data,
- reserve_fdt,
+ INITCALL(reserve_round_4k);
+ INITCALL(setup_relocaddr_from_bloblist);
+ INITCALL(arch_reserve_mmu);
+ INITCALL(reserve_video);
+ INITCALL(reserve_trace);
+ INITCALL(reserve_uboot);
+ INITCALL(reserve_malloc);
+ INITCALL(reserve_board);
+ INITCALL(reserve_global_data);
+ INITCALL(reserve_fdt);
#if defined(CONFIG_OF_BOARD_FIXUP) && defined(CONFIG_OF_INITIAL_DTB_READONLY)
- reloc_fdt,
- fix_fdt,
+ INITCALL(reloc_fdt);
+ INITCALL(fix_fdt);
#endif
- reserve_bootstage,
- reserve_bloblist,
- reserve_arch,
- reserve_stacks,
- dram_init_banksize,
- show_dram_config,
- INIT_FUNC_WATCHDOG_RESET
- setup_bdinfo,
- display_new_sp,
- INIT_FUNC_WATCHDOG_RESET
+ INITCALL(reserve_bootstage);
+ INITCALL(reserve_bloblist);
+ INITCALL(reserve_arch);
+ INITCALL(reserve_stacks);
+ INITCALL(dram_init_banksize);
+ INITCALL(show_dram_config);
+ WATCHDOG_RESET();
+ INITCALL(setup_bdinfo);
+ INITCALL(display_new_sp);
+ WATCHDOG_RESET();
#if !defined(CONFIG_OF_BOARD_FIXUP) || !defined(CONFIG_OF_INITIAL_DTB_READONLY)
- reloc_fdt,
+ INITCALL(reloc_fdt);
#endif
- reloc_bootstage,
- reloc_bloblist,
- setup_reloc,
+ INITCALL(reloc_bootstage);
+ INITCALL(reloc_bloblist);
+ INITCALL(setup_reloc);
#if defined(CONFIG_X86) || defined(CONFIG_ARC)
- copy_uboot_to_ram,
- do_elf_reloc_fixups,
+ INITCALL(copy_uboot_to_ram);
+ INITCALL(do_elf_reloc_fixups);
#endif
- clear_bss,
+ INITCALL(clear_bss);
/*
* Deregister all cyclic functions before relocation, so that
* gd->cyclic_list does not contain any references to pre-relocation
@@ -985,12 +990,12 @@ static const init_fnc_t init_sequence_f[] = {
* This should happen as late as possible so that the window where a
* watchdog device is not serviced is as small as possible.
*/
- cyclic_unregister_all,
+ INITCALL(cyclic_unregister_all);
#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX)
- jump_to_copy,
+ INITCALL(jump_to_copy);
#endif
- NULL,
-};
+ return ret;
+}
void board_init_f(ulong boot_flags)
{
@@ -1000,7 +1005,7 @@ void board_init_f(ulong boot_flags)
gd->flags &= ~GD_FLG_HAVE_CONSOLE;
gd->boardf = &boardf;
- if (initcall_run_list(init_sequence_f))
+ if (initcall_run_f())
hang();
#if !defined(CONFIG_ARM) && !defined(CONFIG_SANDBOX) && \
diff --git a/include/initcall.h b/include/initcall.h
index 62d3bb67f08..72faab42ada 100644
--- a/include/initcall.h
+++ b/include/initcall.h
@@ -35,4 +35,29 @@ typedef int (*init_fnc_t)(void);
*/
int initcall_run_list(const init_fnc_t init_sequence[]);
+#define INITCALL(_call) \
+ do { \
+ if (!ret) { \
+ debug("%s(): calling %s()\n", __func__, #_call); \
+ ret = _call(); \
+ } \
+ } while (0)
+
+#define INITCALL_EVT(_evt) \
+ do { \
+ if (!ret) { \
+ debug("%s(): event %d/%s\n", __func__, _evt, \
+ event_type_name(_evt)) ; \
+ ret = event_notify_null(_evt); \
+ } \
+ } while (0)
+
+#if defined(CONFIG_WATCHDOG) || defined(CONFIG_HW_WATCHDOG)
+#define WATCHDOG_INIT() INITCALL(init_func_watchdog_init)
+#define WATCHDOG_RESET() INITCALL(init_func_watchdog_reset)
+#else
+#define WATCHDOG_INIT()
+#define WATCHDOG_RESET()
+#endif
+
#endif
--
2.43.0
More information about the U-Boot
mailing list