[PATCH v5 6/9] drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC

[Wadim Egorov]

Am 13.12.24 um 17:31 schrieb Santhosh Kumar K:
> From: Neha Malcom Francis <n-francis at ti.com>
> 
> Add CONFIG_K3_INLINE_ECC so that ECC functions can be compiled into R5 SPL
> only when the config has been enabled.
> 
> Signed-off-by: Neha Malcom Francis <n-francis at ti.com>

Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   drivers/ram/Kconfig | 10 ++++++++++
>   1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
> index f7e357f24da7..533d0c629a64 100644
> --- a/drivers/ram/Kconfig
> +++ b/drivers/ram/Kconfig
> @@ -116,6 +116,16 @@ config IMXRT_SDRAM
>   	  to support external memories like sdram, psram & nand.
>   	  This driver is for the sdram memory interface with the SEMC.
>   
> +config K3_INLINE_ECC
> +	bool "Enable TI Inline ECC support"
> +	depends on K3_DDRSS
> +	help
> +	  Enable Inline ECC support on K3 platforms. 1/9th of the SDRAM space
> +	  is used for ECC storage and the rest 8/9th is available for system
> +	  use. Enabling ECC increases boot time as the ECC protected regions
> +	  need to be primed with a predefined value prior to enabling ECC
> +	  check.
> +
>   source "drivers/ram/aspeed/Kconfig"
>   source "drivers/ram/cadence/Kconfig"
>   source "drivers/ram/octeon/Kconfig"