[PATCH 4/7] configs: am62ax_evm_a53_defconfig: Enable MMC UHS modes
Judith Mendez
jm at ti.com
Fri Dec 20 20:22:17 CET 2024
Enable configs required to enable MMC UHS modes in A53 SPL
and U-Boot proper.
Signed-off-by: Judith Mendez <jm at ti.com>
---
configs/am62ax_evm_a53_defconfig | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/configs/am62ax_evm_a53_defconfig b/configs/am62ax_evm_a53_defconfig
index 23da7b3bf61..a070182cd14 100644
--- a/configs/am62ax_evm_a53_defconfig
+++ b/configs/am62ax_evm_a53_defconfig
@@ -1,6 +1,7 @@
CONFIG_ARM=y
CONFIG_ARCH_K3=y
CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
@@ -8,6 +9,7 @@ CONFIG_SOC_K3_AM62A7=y
CONFIG_TARGET_AM62A7_A53_EVM=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
+CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ti/k3-am62a7-sk"
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_DM_RESET=y
@@ -34,6 +36,7 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
+CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_POWER_DOMAIN=y
CONFIG_SPL_YMODEM_SUPPORT=y
@@ -57,10 +60,20 @@ CONFIG_CLK_TI_SCI=y
CONFIG_DMA_CHANNELS=y
CONFIG_TI_K3_NAVSS_UDMA=y
CONFIG_TI_SCI_PROTOCOL=y
-# CONFIG_GPIO is not set
-# CONFIG_I2C is not set
+CONFIG_SPL_DM_GPIO_LOOKUP_LABEL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_SPL_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
CONFIG_DM_MAILBOX=y
CONFIG_K3_SEC_PROXY=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_SPL_MMC_SDHCI_ADMA=y
@@ -74,6 +87,12 @@ CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_POWER_DOMAIN=y
CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
CONFIG_K3_SYSTEM_CONTROLLER=y
CONFIG_REMOTEPROC_TI_K3_ARM64=y
CONFIG_REMOTEPROC_TI_K3_DSP=y
--
2.47.1
More information about the U-Boot
mailing list