[PATCH v3 3/3] configs: am62px_evm_a53_defconfig: enable USB DFU support

[Siddharth Vadapalli]

The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support
for AM62x SoC is applicable to the AM62Px SoC as well. Hence, include it
in "am62px_evm_a53_defconfig" in order to enable support for USB DFU
flash and boot. Remove those configs from "am62px_evm_a53_defconfig" which
are present in the "am62x_a53_usbdfu.config" config fragment that is being
included.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Reviewed-by: Roger Quadros <rogerq at kernel.org>
---
v2:
https://patchwork.ozlabs.org/project/uboot/patch/20241218124542.3519447-4-s-vadapalli@ti.com/
Changes since v2:
- Collected Reviwed-by tags.

This patch was first introduced in the v2 series itself and hence it
doesn't have a v1.

 configs/am62px_evm_a53_defconfig | 24 +-----------------------
 1 file changed, 1 insertion(+), 23 deletions(-)

diff --git a/configs/am62px_evm_a53_defconfig b/configs/am62px_evm_a53_defconfig
index 9635beb1b27..9862b1f9a16 100644
--- a/configs/am62px_evm_a53_defconfig
+++ b/configs/am62px_evm_a53_defconfig
@@ -41,14 +41,11 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
 CONFIG_SPL_DMA=y
-CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
-CONFIG_SPL_RAM_DEVICE=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
@@ -58,14 +55,12 @@ CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_BOOTEFI_SELFTEST=y
 CONFIG_CMD_NVEDIT_EFI=y
 CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_REMOTEPROC=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
@@ -85,17 +80,12 @@ CONFIG_SPL_DM_DEVICE_REMOVE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
-CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
-CONFIG_DFU_MMC=y
 CONFIG_DFU_MTD=y
-CONFIG_DFU_RAM=y
 CONFIG_DFU_SF=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000
-CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
@@ -164,22 +154,10 @@ CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
 CONFIG_DM_THERMAL=y
-CONFIG_USB=y
-CONFIG_DM_USB_GADGET=y
-CONFIG_SPL_DM_USB_GADGET=y
 CONFIG_SPL_USB_HOST=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_SPL_USB_DWC3_GENERIC=y
 CONFIG_SPL_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0451
-CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
-CONFIG_SPL_DFU=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_EFI_SET_TIME=y
 
 #include <configs/k3_efi_capsule.config>
+#include <configs/am62x_a53_usbdfu.config>
-- 
2.43.0