[PATCH 2/6] drivers/mmc/Kconfig: Make DM_MMC a hidden symbol
Peter Robinson
pbrobinson at gmail.com
Mon Dec 23 19:26:14 CET 2024
On Fri, 20 Dec 2024 at 22:26, Tom Rini <trini at konsulko.com> wrote:
> At this point in time, DM is always enabled. So if MMC is enabled, it
> should select DM_MMC. No drivers need to depend on DM_MMC being enabled
> now, so remove that from dependency lists. This now means that a number
> of platforms which select'd DM_MMC need to select MMC instead.
>
> Signed-off-by: Tom Rini <trini at konsulko.com>
>
Reviewed-by: Peter Robinson <pbrobinson at gmail.com>
Looks sane based on my Kconfig knowledge.
> ---
> Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Minkyu Kang <mk7.kang at samsung.com>
> Cc: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Svyatoslav Ryhel <clamor95 at gmail.com>
> Cc: Thierry Reding <treding at nvidia.com>
> ---
> arch/Kconfig | 2 +-
> arch/arm/Kconfig | 18 +++------
> arch/arm/mach-exynos/Kconfig | 8 ++--
> arch/arm/mach-imx/mx5/Kconfig | 2 +-
> arch/arm/mach-imx/mx6/Kconfig | 32 +++++++--------
> arch/arm/mach-omap2/omap3/Kconfig | 2 +-
> arch/arm/mach-s5pc1xx/Kconfig | 2 +-
> arch/arm/mach-tegra/Kconfig | 2 +-
> drivers/mmc/Kconfig | 65 +++++++++++--------------------
> 9 files changed, 52 insertions(+), 81 deletions(-)
>
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 6258788f53ff..44ae4b3babdf 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -172,13 +172,13 @@ config SANDBOX
> select DM_GPIO
> select DM_I2C
> select DM_KEYBOARD
> - select DM_MMC
> select DM_SERIAL
> select DM_SPI
> select DM_SPI_FLASH
> select GZIP_COMPRESSED
> select IO_TRACE
> select LZO
> + select MMC
> select MTD
> select OF_BOARD_SETUP
> select PCI_ENDPOINT
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index ea414fe376a8..ea256f687867 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1163,7 +1163,6 @@ config ARCH_SUNXI
> select DM_SPI if SPI
> select DM_SPI_FLASH if SPI && MTD
> select DM_KEYBOARD
> - select DM_MMC if MMC
> select DM_SERIAL
> select OF_BOARD_SETUP
> select OF_CONTROL
> @@ -1211,7 +1210,6 @@ config ARCH_U8500
> select CPU_V7A
> select DM
> select DM_GPIO
> - select DM_MMC if MMC
> select DM_SERIAL
> select DM_USB_GADGET if DM_USB
> select OF_CONTROL
> @@ -1236,7 +1234,6 @@ config ARCH_VERSAL
> select ARM64
> select CLK
> select DM
> - select DM_MMC if MMC
> select DM_SERIAL
> select GICV3
> select OF_CONTROL
> @@ -1249,7 +1246,6 @@ config ARCH_VERSAL2
> select ARM64
> select CLK
> select DM
> - select DM_MMC if MMC
> select DM_SERIAL
> select OF_CONTROL
> imply BOARD_LATE_INIT
> @@ -1261,7 +1257,6 @@ config ARCH_VERSAL_NET
> select ARM64
> select CLK
> select DM
> - select DM_MMC if MMC
> select DM_SERIAL
> select OF_CONTROL
> imply BOARD_LATE_INIT
> @@ -1286,7 +1281,6 @@ config ARCH_ZYNQ
> select CPU_V7A
> select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
> select DM
> - select DM_MMC if MMC
> select DM_SERIAL
> select DM_SPI
> select DM_SPI_FLASH
> @@ -1315,7 +1309,6 @@ config ARCH_ZYNQMP_R5
> select CLK
> select CPU_V7R
> select DM
> - select DM_MMC if MMC
> select DM_SERIAL
> select OF_CONTROL
> imply CMD_DM
> @@ -1329,7 +1322,6 @@ config ARCH_ZYNQMP
> select DM
> select DEBUG_UART_BOARD_INIT if SPL && DEBUG_UART
> imply DM_MAILBOX
> - select DM_MMC if MMC
> select DM_SERIAL
> select MTD
> select DM_SPI if SPI
> @@ -1397,8 +1389,8 @@ config TARGET_TOTAL_COMPUTE
> select PL01X_SERIAL
> select DM
> select DM_SERIAL
> - select DM_MMC
> select DM_GPIO
> + select MMC
> imply OF_HAS_PRIOR_STAGE
> imply MISC_INIT_R
>
> @@ -1904,7 +1896,7 @@ config TARGET_SL28
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> + select MMC
> select MTD
> select DM_SPI_FLASH
> select DM_MDIO
> @@ -1945,10 +1937,10 @@ config ARCH_UNIPHIER
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_MTD
> select DM_RESET
> select DM_SERIAL
> + select MMC
> select OF_BOARD_SETUP
> select OF_CONTROL
> select OF_LIBFDT
> @@ -1992,9 +1984,9 @@ config ARCH_STI
> select BLK
> select CPU_V7A
> select DM
> - select DM_MMC
> select DM_RESET
> select DM_SERIAL
> + select MMC
> imply CMD_DM
> help
> Support for STMicroelectronics STiH407/10 SoC family.
> @@ -2041,7 +2033,6 @@ config ARCH_ROCKCHIP
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_PWM
> select DM_REGULATOR
> select DM_SERIAL
> @@ -2050,6 +2041,7 @@ config ARCH_ROCKCHIP
> select DM_USB_GADGET if USB_DWC3_GADGET
> select ENABLE_ARM_SOC_BOOT0_HOOK
> select OF_CONTROL
> + select MMC
> select MTD
> select SPI
> select SPL_DM if SPL
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 3fee5a4299b8..7e6959510087 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -19,7 +19,7 @@ config ARCH_EXYNOS4
> select BOARD_EARLY_INIT_F
> select CPU_V7A
> select BLK
> - select DM_MMC
> + select MMC
> help
> Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
> are multiple SoCs in this family including Exynos4210,
> Exynos4412,
> @@ -40,7 +40,7 @@ config ARCH_EXYNOS5
> imply USB_ETHER_RTL8152
> imply USB_ETHER_SMSC95XX
> select BLK
> - select DM_MMC
> + select MMC
>
> help
> Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
> @@ -52,7 +52,7 @@ config ARCH_EXYNOS7
> select ARM64
> select BOARD_EARLY_INIT_F
> select BLK
> - select DM_MMC
> + select MMC
> help
> Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or
> Cortex-A53 CPU (and some in a big.LITTLE configuration). There
> are
> @@ -62,7 +62,7 @@ config ARCH_EXYNOS9
> bool "Exynos9 SoC family"
> select ARM64
> select BLK
> - select DM_MMC
> + select MMC
> help
> Samsung Exynos9 SoC family are based on ARMv8 Cortex CPU. There
> are
> multiple SoCs in this family including Exynos850.
> diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
> index d282663dcf1f..4d1e07b14d32 100644
> --- a/arch/arm/mach-imx/mx5/Kconfig
> +++ b/arch/arm/mach-imx/mx5/Kconfig
> @@ -26,9 +26,9 @@ config TARGET_KP_IMX53
> select DM_I2C
> select DM_PMIC
> select DM_SERIAL
> - select DM_MMC
> select BLK
> select DM_REGULATOR
> + select MMC
> select MX53
> imply CMD_DM
>
> diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
> index 1f8022ee6853..4020e16d92dc 100644
> --- a/arch/arm/mach-imx/mx6/Kconfig
> +++ b/arch/arm/mach-imx/mx6/Kconfig
> @@ -81,8 +81,8 @@ config MX6UL_OPOS6UL
> select BOARD_LATE_INIT
> select DM
> select DM_GPIO
> - select DM_MMC
> select DM_THERMAL
> + select MMC
> select SPL_DM if SPL
> select SPL_OF_CONTROL if SPL
> select SPL_PINCTRL if SPL
> @@ -176,9 +176,9 @@ config TARGET_DART_6UL
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_DHCOMIMX6
> @@ -197,10 +197,10 @@ config TARGET_DISPLAY5
> depends on MX6Q
> select DM
> select DM_I2C
> - select DM_MMC
> select DM_SPI
> select DM_GPIO
> select DM_SERIAL
> + select MMC
> select MTD
> select SUPPORT_SPL
> imply CMD_DM
> @@ -245,7 +245,7 @@ config TARGET_KOSAGI_NOVENA
> bool "Kosagi Novena"
> select BOARD_LATE_INIT
> select DM_GPIO
> - select DM_MMC
> + select MMC
> select PCI
> select SCSI
> select VIDEO
> @@ -280,8 +280,8 @@ config TARGET_MX6LOGICPD
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_PMIC
> + select MMC
> select OF_CONTROL
> imply CMD_DM
>
> @@ -300,10 +300,10 @@ config TARGET_MX6DL_MAMOJ
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_PMIC
> select DM_PMIC_PFUZE100
> select DM_THERMAL
> + select MMC
> select OF_CONTROL
> select PINCTRL
> select SPL
> @@ -332,8 +332,8 @@ config TARGET_MX6Q_ENGICAM
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_THERMAL
> + select MMC
> select OF_CONTROL
> select SPL_DM if SPL
> select SPL_OF_CONTROL if SPL
> @@ -352,8 +352,8 @@ config TARGET_MX6Q_ACC
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_MX6S_SIELAFF
> @@ -453,8 +453,8 @@ config TARGET_MX6UL_ENGICAM
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_THERMAL
> + select MMC
> select OF_CONTROL
> select SPL_DM if SPL
> select SPL_OF_CONTROL if SPL
> @@ -490,9 +490,9 @@ config TARGET_MYS_6ULX
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_NITROGEN6X
> @@ -507,10 +507,10 @@ config TARGET_NPI_IMX6ULL
> bool "Seeed NPI-IMX6ULL"
> depends on MX6ULL
> select DM
> - select DM_MMC
> select DM_GPIO
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_OPOS6ULDEV
> @@ -566,9 +566,9 @@ config TARGET_PCL063
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_PCL063_ULL
> @@ -577,9 +577,9 @@ config TARGET_PCL063_ULL
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> select SUPPORT_SPL
>
> config TARGET_SOMLABS_VISIONSOM_6ULL
> @@ -588,9 +588,9 @@ config TARGET_SOMLABS_VISIONSOM_6ULL
> select BOARD_LATE_INIT
> select DM
> select DM_GPIO
> - select DM_MMC
> select DM_SERIAL
> select DM_THERMAL
> + select MMC
> imply CMD_DM
>
> config TARGET_TBS2910
> @@ -605,7 +605,7 @@ config TARGET_KP_IMX6Q_TPC
> select DM
> select SPL_DM if SPL
> select DM_THERMAL
> - select DM_MMC
> + select MMC
> select DM_REGULATOR
> select SPL_DM_REGULATOR if SPL
> select DM_SERIAL
> @@ -673,7 +673,7 @@ config TARGET_BRPPT2
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> + select MMC
> select SUPPORT_SPL
> select SPL_DM if SPL
> select SPL_OF_CONTROL if SPL
> diff --git a/arch/arm/mach-omap2/omap3/Kconfig
> b/arch/arm/mach-omap2/omap3/Kconfig
> index f15f44fe7d4b..a175e5ce6edc 100644
> --- a/arch/arm/mach-omap2/omap3/Kconfig
> +++ b/arch/arm/mach-omap2/omap3/Kconfig
> @@ -30,8 +30,8 @@ config TARGET_AM3517_EVM
> select DM
> select DM_GPIO
> select DM_I2C
> - select DM_MMC
> select DM_SERIAL
> + select MMC
> imply CMD_DM
>
> config TARGET_CM_T35
> diff --git a/arch/arm/mach-s5pc1xx/Kconfig b/arch/arm/mach-s5pc1xx/Kconfig
> index b6a4b0b653fb..b15b2e7b6a01 100644
> --- a/arch/arm/mach-s5pc1xx/Kconfig
> +++ b/arch/arm/mach-s5pc1xx/Kconfig
> @@ -8,8 +8,8 @@ config TARGET_S5P_GONI
> bool "S5P Goni board"
> select OF_CONTROL
> select BLK
> - select DM_MMC
> select MISC_COMMON
> + select MMC
>
> config TARGET_SMDKC100
> bool "Support smdkc100 board"
> diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
> index 04612895576a..78b89729f191 100644
> --- a/arch/arm/mach-tegra/Kconfig
> +++ b/arch/arm/mach-tegra/Kconfig
> @@ -48,13 +48,13 @@ config TEGRA_COMMON
> select DM_GPIO
> select DM_I2C
> select DM_KEYBOARD
> - select DM_MMC
> select DM_PWM
> select DM_RESET
> select DM_SERIAL
> select DM_SPI
> select DM_SPI_FLASH
> select MISC
> + select MMC
> select MTD
> select OF_CONTROL
> select SPI
> diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
> index 9f2fecce3826..46513db0d6e3 100644
> --- a/drivers/mmc/Kconfig
> +++ b/drivers/mmc/Kconfig
> @@ -3,7 +3,7 @@ menu "MMC Host controller Support"
> config MMC
> bool "MMC/SD/SDIO card support"
> default ARM || PPC || SANDBOX
> - select DM_MMC if DM
> + select DM_MMC
> help
> This selects MultiMediaCard, Secure Digital and Secure
> Digital I/O support.
> @@ -39,14 +39,14 @@ config MMC_BROKEN_CD
> If card detection feature is broken, just poll to detect.
>
> config DM_MMC
> - bool "Enable MMC controllers using Driver Model"
> + bool
> depends on DM
> help
> - This enables the MultiMediaCard (MMC) uclass which supports MMC
> and
> - Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD,
> etc.)
> - and non-removable (e.g. eMMC chip) devices are supported. These
> - appear as block devices in U-Boot and can support filesystems
> such
> - as EXT4 and FAT.
> + This enables the MultiMediaCard (MMC) driver model uclass which
> + supports MMC and Secure Digital I/O (SDIO) cards. Both removable
> (SD,
> + micro-SD, etc.) and non-removable (e.g. eMMC chip) devices are
> + supported. These appear as block devices in U-Boot and can
> support
> + filesystems such as EXT4 and FAT.
>
> config SPL_DM_MMC
> bool "Enable MMC controllers using Driver Model in SPL"
> @@ -79,7 +79,7 @@ config MMC_SDHCI_ADMA_HELPERS
>
> config MMC_SPI
> bool "Support for SPI-based MMC controller"
> - depends on DM_MMC && DM_SPI
> + depends on DM_SPI
> help
> This selects SPI-based MMC controllers.
> If you have an MMC controller on a SPI bus, say Y here.
> @@ -97,7 +97,6 @@ config MMC_SPI_CRC_ON
>
> config ARM_PL180_MMCI
> bool "ARM AMBA Multimedia Card Interface and compatible support"
> - depends on DM_MMC
> help
> This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
> Interface (PL180, PL181 and compatible) support.
> @@ -258,7 +257,6 @@ config MMC_DW
>
> config MMC_DW_CORTINA
> bool "Cortina specific extensions for Synopsys DW Memory Card
> Interface"
> - depends on DM_MMC
> depends on MMC_DW
> help
> This selects support for Cortina SoC specific extensions to the
> @@ -285,7 +283,7 @@ config MMC_DW_K3
>
> config MMC_DW_ROCKCHIP
> bool "Rockchip SD/MMC controller support"
> - depends on DM_MMC && OF_CONTROL
> + depends on OF_CONTROL
> depends on MMC_DW
> help
> This enables support for the Rockchip SD/MMM controller, which is
> @@ -306,7 +304,6 @@ config MMC_DW_SOCFPGA
> config MMC_DW_SNPS
> bool "Extensions for DW Memory Card Interface used in Synopsys ARC
> devboards"
> depends on MMC_DW
> - depends on DM_MMC
> depends on OF_CONTROL
> depends on CLK
> help
> @@ -317,13 +314,12 @@ config NEXELL_DWMMC
> bool "Nexell SD/MMC controller support"
> depends on ARCH_NEXELL
> depends on MMC_DW
> - depends on DM_MMC
> depends on PINCTRL_NEXELL
> default y
>
> config MMC_MESON_GX
> bool "Meson GX EMMC controller support"
> - depends on DM_MMC && ARCH_MESON
> + depends on ARCH_MESON
> help
> Support for EMMC host controller on Meson GX ARM SoCs platform
> (S905)
>
> @@ -338,7 +334,7 @@ config MMC_MXC
>
> config MMC_OWL
> bool "Actions OWL Multimedia Card Interface support"
> - depends on ARCH_OWL && DM_MMC
> + depends on ARCH_OWL
> help
> This selects the OWL SD/MMC host controller found on board
> based on Actions S700/S900 SoC.
> @@ -366,7 +362,6 @@ config MMC_PCI
> config MMC_OCTEONTX
> bool "Marvell Octeon Multimedia Card Interface support"
> depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
> - depends on DM_MMC
> select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2
> help
> This selects the Octeon Multimedia card Interface.
> @@ -377,7 +372,7 @@ config MMC_OCTEONTX
>
> config MVEBU_MMC
> bool "Kirkwood MMC controller support"
> - depends on DM_MMC && ARCH_KIRKWOOD
> + depends on ARCH_KIRKWOOD
> help
> Support for MMC host controller on Kirkwood SoCs.
> If you are on a Kirkwood architecture, say Y here.
> @@ -386,8 +381,7 @@ config MVEBU_MMC
>
> config MMC_OMAP_HS
> bool "TI OMAP High Speed Multimedia Card Interface support"
> - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
> - select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
> + select DM_REGULATOR_PBIAS if DM_REGULATOR
> help
> This selects the TI OMAP High Speed Multimedia card Interface.
> If you have an omap2plus board with a Multimedia Card slot,
> @@ -430,7 +424,6 @@ config SH_MMCIF
> config MMC_UNIPHIER
> bool "UniPhier SD/MMC Host Controller support"
> depends on ARCH_UNIPHIER
> - depends on DM_MMC
> depends on OF_CONTROL
> help
> This selects support for the Matsushita SD/MMC Host Controller on
> @@ -439,7 +432,6 @@ config MMC_UNIPHIER
> config RENESAS_SDHI
> bool "Renesas R-Car SD/MMC Host Controller support"
> depends on ARCH_RENESAS
> - depends on DM_MMC
> depends on OF_CONTROL
> select BOUNCE_BUFFER
> help
> @@ -449,7 +441,6 @@ config RENESAS_SDHI
> config MMC_BCM2835
> bool "BCM2835 family custom SD/MMC Host Controller support"
> depends on ARCH_BCM283X
> - depends on DM_MMC
> depends on OF_CONTROL
> default y
> help
> @@ -469,7 +460,7 @@ config JZ47XX_MMC
> config MMC_SANDBOX
> bool "Sandbox MMC support"
> depends on SANDBOX
> - depends on DM_MMC && OF_CONTROL
> + depends on OF_CONTROL
> help
> This select a dummy sandbox MMC driver. At present this does
> nothing
> other than allow sandbox to be build with MMC support. This
> @@ -559,7 +550,6 @@ config FIXED_SDHCI_ALIGNED_BUFFER
> config MMC_SDHCI_ASPEED
> bool "Aspeed SDHCI controller"
> depends on ARCH_ASPEED
> - depends on DM_MMC
> depends on MMC_SDHCI
> select MISC
> help
> @@ -571,7 +561,7 @@ config MMC_SDHCI_ASPEED
> config MMC_SDHCI_ATMEL
> bool "Atmel SDHCI controller support"
> depends on ARCH_AT91
> - depends on DM_MMC && ARCH_AT91
> + depends on ARCH_AT91
> depends on MMC_SDHCI
> help
> This enables support for the Atmel SDHCI controller, which
> supports
> @@ -606,7 +596,6 @@ config MMC_SDHCI_BCMSTB
>
> config MMC_SDHCI_CADENCE
> bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
> - depends on DM_MMC
> depends on MMC_SDHCI
> depends on OF_CONTROL
> help
> @@ -618,7 +607,6 @@ config MMC_SDHCI_CADENCE
>
> config MMC_SDHCI_CV1800B
> bool "SDHCI support for the CV1800B SD/SDIO/eMMC controller"
> - depends on DM_MMC
> depends on MMC_SDHCI
> depends on OF_CONTROL
> help
> @@ -633,7 +621,7 @@ config MMC_SDHCI_AM654
> bool "SDHCI Controller on TI's Am654 devices"
> depends on ARCH_K3
> depends on MMC_SDHCI
> - depends on DM_MMC && OF_CONTROL
> + depends on OF_CONTROL
> depends on REGMAP
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -653,7 +641,6 @@ config MMC_SDHCI_IPROC
>
> config MMC_SDHCI_F_SDH30
> bool "SDHCI support for Fujitsu Semiconductor/Socionext F_SDH30"
> - depends on DM_MMC
> depends on MMC_SDHCI
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> @@ -673,7 +660,6 @@ config MMC_SDHCI_KONA
>
> config MMC_SDHCI_MSM
> bool "Qualcomm SDHCI controller"
> - depends on DM_MMC
> depends on MMC_SDHCI
> help
> Enables support for SDHCI 2.0 controller present on some Qualcomm
> @@ -685,7 +671,6 @@ config MMC_SDHCI_MV
> bool "SDHCI support on Marvell platform"
> depends on ARCH_MVEBU
> depends on MMC_SDHCI
> - depends on DM_MMC
> help
> This selects the Secure Digital Host Controller Interface on
> Marvell platform.
> @@ -697,7 +682,6 @@ config MMC_SDHCI_MV
> config MMC_SDHCI_NPCM
> bool "SDHCI support on Nuvoton NPCM device"
> depends on MMC_SDHCI
> - depends on DM_MMC
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> on Nuvoton NPCM device.
> @@ -708,7 +692,7 @@ config MMC_SDHCI_NPCM
>
> config MMC_SDHCI_PIC32
> bool "Microchip PIC32 on-chip SDHCI support"
> - depends on DM_MMC && MACH_PIC32
> + depends on MACH_PIC32
> depends on MMC_SDHCI
> help
> Support for Microchip PIC32 SDHCI controller.
> @@ -716,7 +700,6 @@ config MMC_SDHCI_PIC32
> config MMC_SDHCI_ROCKCHIP
> bool "Arasan SDHCI controller for Rockchip support"
> depends on ARCH_ROCKCHIP
> - depends on DM_MMC
> depends on MMC_SDHCI
> help
> Support for Arasan SDHCI host controller on Rockchip ARM SoCs
> platform
> @@ -735,7 +718,6 @@ config MMC_SDHCI_S5P
> config MMC_SDHCI_SNPS
> bool "Synopsys DesignWare SDHCI controller"
> depends on MMC_SDHCI
> - depends on DM_MMC
> help
> Support for DesignWare SDHCI host controller on Alibaba TH1520
> SoC.
> This is a highly configurable and programmable, high performance
> @@ -753,7 +735,7 @@ config MMC_SDHCI_STI
>
> config MMC_SDHCI_XENON
> bool "SDHCI support for the Xenon SDHCI controller"
> - depends on MMC_SDHCI && DM_MMC && OF_CONTROL
> + depends on MMC_SDHCI && OF_CONTROL
> help
> Support for Xenon SDHCI host controller on Marvell Armada 3700
> 7k/8k ARM SoCs platforms
> @@ -764,7 +746,6 @@ config MMC_SDHCI_XENON
>
> config MMC_SDHCI_TANGIER
> bool "Tangier SDHCI controller support"
> - depends on DM_MMC
> depends on MMC_SDHCI
> help
> This selects support for SDHCI controller on Tanginer
> @@ -800,7 +781,7 @@ config TEGRA124_MMC_DISABLE_EXT_LOOPBACK
>
> config MMC_SDHCI_ZYNQ
> bool "Arasan SDHCI controller support"
> - depends on DM_MMC && OF_CONTROL
> + depends on OF_CONTROL
> depends on MMC_SDHCI
> help
> Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs
> platform
> @@ -842,7 +823,6 @@ config MMC_SUNXI_HAS_MODE_SWITCH
>
> config MMC_PITON
> bool "MMC support for OpenPiton SoC"
> - depends on DM_MMC
> help
> This selects support for the SD host controller on OpenPiton SoC.
> Note that this SD controller directly exposes the contents of the
> @@ -851,7 +831,7 @@ config MMC_PITON
>
> config GENERIC_ATMEL_MCI
> bool "Atmel Multimedia Card Interface support"
> - depends on DM_MMC && ARCH_AT91
> + depends on ARCH_AT91
> help
> This enables support for Atmel High Speed Multimedia Card
> Interface
> (HSMCI), which supports the MultiMedia Card (MMC) Specification
> V4.3,
> @@ -860,7 +840,7 @@ config GENERIC_ATMEL_MCI
>
> config STM32_SDMMC2
> bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
> - depends on DM_MMC && OF_CONTROL
> + depends on OF_CONTROL
> help
> This selects support for the SD/MMC controller on STM32H7 SoCs.
> If you have a board based on such a SoC and with a SD/MMC slot,
> @@ -880,7 +860,6 @@ config FTSDC010_SDIO
> config MMC_MTK
> bool "MediaTek SD/MMC Card Interface support"
> depends on ARCH_MEDIATEK || ARCH_MTMIPS
> - depends on DM_MMC
> depends on OF_CONTROL
> help
> This selects the MediaTek(R) Secure digital and Multimedia card
> Interface.
> @@ -911,7 +890,7 @@ config FSL_ESDHC_SUPPORT_ADMA2
>
> config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
> bool "enable eSDHC workaround for 3.3v IO reliability issue"
> - depends on FSL_ESDHC && DM_MMC
> + depends on FSL_ESDHC
> help
> When eSDHC operates at 3.3v, damage can accumulate in an internal
> level shifter at a higher than expected rate. The faster the
> interface
> --
> 2.43.0
>
>
More information about the U-Boot
mailing list