[PATCH 6/6] block: Remove "select BLK" from non-block drivers

[Peter Robinson]

On Fri, 20 Dec 2024 at 22:27, Tom Rini <trini at konsulko.com> wrote:

> Now that block drivers are all selecting the BLK symbol, there's no need
> for other options to be select'ing BLK so that other required
> functionality can be enabled. Remove these places.
>
> Signed-off-by: Tom Rini <trini at konsulko.com>
>
Reviewed-by: Peter Robinson <pbrobinson at gmail.com>


> ---
>  arch/arm/Kconfig              | 4 ----
>  arch/arm/mach-exynos/Kconfig  | 4 ----
>  arch/arm/mach-imx/mx5/Kconfig | 2 +-
>  arch/arm/mach-s5pc1xx/Kconfig | 1 -
>  4 files changed, 1 insertion(+), 10 deletions(-)
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index ea256f687867..86b37e8d5f8d 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1371,7 +1371,6 @@ config ARCH_VEXPRESS64
>         select PL01X_SERIAL
>         select OF_CONTROL
>         select CLK
> -       select BLK
>         select MTD_NOR_FLASH if MTD
>         select FLASH_CFI_DRIVER if MTD
>         select ENV_IS_IN_FLASH if MTD
> @@ -1981,7 +1980,6 @@ config ARCH_STM32
>
>  config ARCH_STI
>         bool "Support STMicroelectronics SoCs"
> -       select BLK
>         select CPU_V7A
>         select DM
>         select DM_RESET
> @@ -2028,7 +2026,6 @@ config ARCH_STM32MP
>
>  config ARCH_ROCKCHIP
>         bool "Support Rockchip SoCs"
> -       select BLK
>         select BINMAN if SPL_OPTEE || SPL
>         select DM
>         select DM_GPIO
> @@ -2116,7 +2113,6 @@ config TARGET_POMELO
>         select AHCI
>         select SCSI_AHCI
>         select AHCI_PCI
> -       select BLK
>         select PCI
>         select DM_PCI
>         select SCSI
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index 7e6959510087..28193039cb84 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -18,7 +18,6 @@ config ARCH_EXYNOS4
>         bool "Exynos4 SoC family"
>         select BOARD_EARLY_INIT_F
>         select CPU_V7A
> -       select BLK
>         select MMC
>         help
>           Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
> @@ -39,7 +38,6 @@ config ARCH_EXYNOS5
>         imply USB_ETHER_ASIX
>         imply USB_ETHER_RTL8152
>         imply USB_ETHER_SMSC95XX
> -       select BLK
>         select MMC
>
>         help
> @@ -51,7 +49,6 @@ config ARCH_EXYNOS7
>         bool "Exynos7 SoC family"
>         select ARM64
>         select BOARD_EARLY_INIT_F
> -       select BLK
>         select MMC
>         help
>           Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or
> @@ -61,7 +58,6 @@ config ARCH_EXYNOS7
>  config ARCH_EXYNOS9
>         bool "Exynos9 SoC family"
>         select ARM64
> -       select BLK
>         select MMC
>         help
>           Samsung Exynos9 SoC family are based on ARMv8 Cortex CPU. There
> are
> diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
> index 4d1e07b14d32..0dfd68496875 100644
> --- a/arch/arm/mach-imx/mx5/Kconfig
> +++ b/arch/arm/mach-imx/mx5/Kconfig
> @@ -26,7 +26,7 @@ config TARGET_KP_IMX53
>         select DM_I2C
>         select DM_PMIC
>         select DM_SERIAL
> -       select BLK
> +       select DM_MMC
>         select DM_REGULATOR
>         select MMC
>         select MX53
> diff --git a/arch/arm/mach-s5pc1xx/Kconfig b/arch/arm/mach-s5pc1xx/Kconfig
> index b15b2e7b6a01..d8b85f80e631 100644
> --- a/arch/arm/mach-s5pc1xx/Kconfig
> +++ b/arch/arm/mach-s5pc1xx/Kconfig
> @@ -7,7 +7,6 @@ choice
>  config TARGET_S5P_GONI
>         bool "S5P Goni board"
>         select OF_CONTROL
> -       select BLK
>         select MISC_COMMON
>         select MMC
>
> --
> 2.43.0
>
>