回复: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board basic support

Alice Guo (OSS) alice.guo at oss.nxp.com
Tue Dec 31 03:34:14 CET 2024


> 主题: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board
> basic support
> > 
> I gave this series a go on top of 5cfbf8c364 origin/next on an EVK I have here
> and I saw no u-boot proper output after the ATF.
> 
> Here is what I saw on UART2:
> U-Boot SPL 2025.01-rc5-00393-g9b292f7d347f (Dec 27 2024 - 16:12:20 -0800)
> DDRMIX is powered UP Normal Boot Trying to boot from MMC2 Primary set
> selected Load image from MMC/SD 0xdec00
> NOTICE:  BL31: v2.10.0  (release):lf-6.6.52-2.2.0
> NOTICE:  BL31: Built : 16:06:15, Dec 27 2024
> 
> U-Boot SPL 2025.01-rc5-00393-g9b292f7d347f (Dec 27 2024 - 16:12:20 -0800)
> DDRMIX is powered UP Normal Boot Trying to boot from MMC2 Primary set
> selected Load image from MMC/SD 0xdec00
> NOTICE:  BL31: v2.10.0  (release):lf-6.6.52-2.2.0
> NOTICE:  BL31: Built : 16:06:15, Dec 27 2024 ^^^ nothing after this
> 
> Any thoughts on what is wrong here?
> 
> Best Regards,
> 
> Tim

Hi Tim,

I tried it on my MX95 and it works well, so I not sure what causes this issue on your EVK.

Best Regards,
Alice Guo


More information about the U-Boot mailing list