[PATCH v5 02/23] doc: ti: k3: Correct spelling mistakes and improve clarity
Mattijs Korpershoek
mkorpershoek at baylibre.com
Mon Jun 3 08:26:49 CEST 2024
Hi Jon,
Thank you for the patch.
On ven., mai 31, 2024 at 17:20, Jonathan Humphreys <j-humphreys at ti.com> wrote:
> Few cosmetic fixes for clarity and spelling mistakes.
>
> Signed-off-by: Jonathan Humphreys <j-humphreys at ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> doc/board/ti/k3.rst | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
> index a1c01d1cf02..927f3976d34 100644
> --- a/doc/board/ti/k3.rst
> +++ b/doc/board/ti/k3.rst
> @@ -51,14 +51,14 @@ For all K3 SoCs the first core started will be inside the Security
> Management Subsystem (SMS) which will secure the device and start a core
> in the wakeup domain to run the ROM code. ROM will then initialize the
> boot media needed to load the binaries packaged inside `tiboot3.bin`,
> -including a 32bit U-Boot SPL, (called the wakup SPL) that ROM will jump
> +including a 32bit U-Boot SPL, (called the wakeup SPL) that ROM will jump
> to after it has finished loading everything into internal SRAM.
>
> .. image:: img/boot_flow_01.svg
> :alt: Boot flow up to wakeup domain SPL
>
> The wakeup SPL, running on a wakeup domain core, will initialize DDR and
> -any peripherals needed load the larger binaries inside the `tispl.bin`
> +any peripherals needed to load the larger binaries inside the `tispl.bin`
> into DDR. Once loaded the wakeup SPL will start one of the 'big'
> application cores inside the main domain to initialize the main domain,
> starting with Trusted Firmware-A (TF-A), before moving on to start
> @@ -94,7 +94,7 @@ essentially 4 unique but very similar flows:
> * Combined binary with a split firmware: (eg: AM62)
>
> For devices that utilize the split binary approach, ROM is not capable
> -of loading the firmware into the SoC requiring the wakeup domain's
> +of loading the firmware into the SoC, requiring the wakeup domain's
> U-Boot SPL to load the firmware.
>
> Devices with a split firmware will have two firmwares loaded into the
> @@ -114,8 +114,8 @@ K3 HS-SE (High Security - Security Enforced) devices enforce an
> authenticated boot flow for secure boot. HS-FS (High Security - Field
> Securable) is the state of a K3 device before it has been eFused with
> customer security keys. In the HS-FS state the authentication still can
> -function as in HS-SE but as there are no customer keys to verify the
> -signatures against the authentication will pass for certificates signed
> +function as in HS-SE, but as there are no customer keys to verify the
> +signatures against, the authentication will pass for certificates signed
> with any key.
>
> Chain of trust
> --
> 2.34.1
More information about the U-Boot
mailing list