[PATCH 0/7] Add the USB5744 hub driver as per new DT binding
Venkatesh Yadav Abbarapu
venkatesh.abbarapu at amd.com
Wed Jun 5 12:02:14 CEST 2024
Add the usb5744/usb2744 hub driver which does the reset gpio toggling
and the i2c initialization sequence.
Tested the USB5744/USB2744 usb hub for usb0, usb1 with the
DT nodes on KR260 board.
Venkatesh Yadav Abbarapu (7):
usb: onboard-hub: Add reset-gpio support
usb: onboard-hub: Fix the return values of regulator APIs
usb: onboard-hub: add support for Microchip USB5744
usb: onboard-hub: Add i2c initialization for usb5744 hub
usb: onboard-hub: Bail out if peer hub is already probed
configs: zynqmp_kria: Enable the USB onboard hub
arm64: zynqmp: Update the usb5744 hub node as per binding
arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 +++++++
arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 +++++++
arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 +++
arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++-
common/usb_onboard_hub.c | 176 +++++++++++++++++++++++--
configs/xilinx_zynqmp_kria_defconfig | 1 +
6 files changed, 304 insertions(+), 12 deletions(-)
--
2.17.1
More information about the U-Boot
mailing list