[PATCH 06/11] serial: mediatek: add support for bus clock and enable it

[Christian Marangi]

Upstream linux also provide the additional optional bus clock.

Add support for it and also enable the baud and bus clock on probe.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 drivers/serial/serial_mtk.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c
index f146f2b006e..d34a31c9cf0 100644
--- a/drivers/serial/serial_mtk.c
+++ b/drivers/serial/serial_mtk.c
@@ -76,6 +76,7 @@ struct mtk_serial_regs {
  *				driver
  * @regs:			Register base of the serial port
  * @clk:			The baud clock device
+ * @clk_bus:			The bus clock device
  * @fixed_clk_rate:		Fallback fixed baud clock rate if baud clock
  *				device is not specified
  * @force_highspeed:		Force using high-speed mode
@@ -83,6 +84,7 @@ struct mtk_serial_regs {
 struct mtk_serial_priv {
 	struct mtk_serial_regs __iomem *regs;
 	struct clk clk;
+	struct clk clk_bus;
 	u32 fixed_clk_rate;
 	bool force_highspeed;
 };
@@ -220,6 +222,10 @@ static int mtk_serial_probe(struct udevice *dev)
 	writel(UART_MCRVAL, &priv->regs->mcr);
 	writel(UART_FCRVAL, &priv->regs->fcr);
 
+	clk_enable(&priv->clk);
+	if (priv->clk_bus.dev)
+		clk_enable(&priv->clk_bus);
+
 	return 0;
 }
 
@@ -250,6 +256,8 @@ static int mtk_serial_of_to_plat(struct udevice *dev)
 		}
 	}
 
+	clk_get_by_name(dev, "bus", &priv->clk_bus);
+
 	priv->force_highspeed = dev_read_bool(dev, "mediatek,force-highspeed");
 
 	return 0;
-- 
2.43.0