[PATCH 08/11] mmc: mediatek: add support for upstream linux clock and property

[Christian Marangi]

Add support for upstream linux clock and map U-Boot property to the one
use in upstream linux where supported.

Also add handling for the use_internal_cd that on upstream is hardcoded
enabled on mt7620.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 drivers/mmc/mtk-sd.c | 33 +++++++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index 296aaee7331..93878900dec 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -336,6 +336,7 @@ struct msdc_compatible {
 	bool enhance_rx;
 	bool builtin_pad_ctrl;
 	bool default_pad_dly;
+	bool use_internal_cd;
 };
 
 struct msdc_delay_phase {
@@ -366,6 +367,10 @@ struct msdc_host {
 	struct clk src_clk_cg;	/* optional, MSDC source clock control gate */
 	struct clk h_clk;	/* MSDC core clock */
 
+	/* upstream linux clock */
+	struct clk axi_cg_clk;	/* optional, AXI clock */
+	struct clk ahb_cg_clk;	/* optional, AHB clock */
+
 	u32 src_clk_freq;	/* source clock */
 	u32 mclk;		/* mmc framework required bus clock */
 	u32 sclk;		/* actual calculated bus clock */
@@ -1638,6 +1643,11 @@ static void msdc_ungate_clock(struct msdc_host *host)
 	clk_enable(&host->h_clk);
 	if (host->src_clk_cg.dev)
 		clk_enable(&host->src_clk_cg);
+
+	if (host->axi_cg_clk.dev)
+		clk_enable(&host->axi_cg_clk);
+	if (host->ahb_cg_clk.dev)
+		clk_enable(&host->ahb_cg_clk);
 }
 
 static int msdc_drv_probe(struct udevice *dev)
@@ -1716,19 +1726,33 @@ static int msdc_of_to_plat(struct udevice *dev)
 
 	clk_get_by_name(dev, "source_cg", &host->src_clk_cg); /* optional */
 
+	/* upstream linux clock */
+	clk_get_by_name(dev, "axi_cg", &host->axi_cg_clk); /* optional */
+	clk_get_by_name(dev, "ahb_cg", &host->ahb_cg_clk); /* optional */
+
 #if CONFIG_IS_ENABLED(DM_GPIO)
 	gpio_request_by_name(dev, "wp-gpios", 0, &host->gpio_wp, GPIOD_IS_IN);
 	gpio_request_by_name(dev, "cd-gpios", 0, &host->gpio_cd, GPIOD_IS_IN);
 #endif
 
 	host->hs400_ds_delay = dev_read_u32_default(dev, "hs400-ds-delay", 0);
-	host->hs200_cmd_int_delay =
-			dev_read_u32_default(dev, "cmd_int_delay", 0);
+	if (dev_read_u32(dev, "mediatek,hs200-cmd-int-delay",
+			 &host->hs200_cmd_int_delay))
+		host->hs200_cmd_int_delay =
+				dev_read_u32_default(dev, "cmd_int_delay", 0);
+
 	host->hs200_write_int_delay =
 			dev_read_u32_default(dev, "write_int_delay", 0);
-	host->latch_ck = dev_read_u32_default(dev, "latch-ck", 0);
+
+	if (dev_read_u32(dev, "mediatek,latch-ck", &host->latch_ck))
+		host->latch_ck = dev_read_u32_default(dev, "latch-ck", 0);
+
 	host->r_smpl = dev_read_u32_default(dev, "r_smpl", 0);
-	host->builtin_cd = dev_read_u32_default(dev, "builtin-cd", 0);
+	if (dev_read_bool(dev, "mediatek,hs400-cmd-resp-sel-rising"))
+		host->r_smpl = 1;
+
+	host->builtin_cd = dev_read_u32_default(dev, "builtin-cd", 0) ||
+			   host->dev_comp->use_internal_cd;
 	host->cd_active_high = dev_read_bool(dev, "cd-active-high");
 
 	return 0;
@@ -1776,6 +1800,7 @@ static const struct msdc_compatible mt7620_compat = {
 	.enhance_rx = false,
 	.builtin_pad_ctrl = true,
 	.default_pad_dly = true,
+	.use_internal_cd = true,
 };
 
 static const struct msdc_compatible mt7621_compat = {
-- 
2.43.0