[PATCH 2/2] arm: dts: k3: binman: am62p: add support for signing TIFSStub images
Dhruva Gole
d-gole at ti.com
Fri Jun 7 10:56:41 CEST 2024
Adds TIFS stub binaries, this is required for deepsleep functionality.
This implements the same change as commit 128f81290b7d ("arm: dts: k3:
binman: am625: add support for signing TIFSSTUB Images") did for TI AM62
SK board.
Signed-off-by: Vibhore Vardhan <vibhore at ti.com>
Signed-off-by: Dhruva Gole <d-gole at ti.com>
---
arch/arm/dts/k3-am62p-sk-binman.dtsi | 65 +++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/k3-am62p-sk-binman.dtsi b/arch/arm/dts/k3-am62p-sk-binman.dtsi
index dea14945bf56..210179756a79 100644
--- a/arch/arm/dts/k3-am62p-sk-binman.dtsi
+++ b/arch/arm/dts/k3-am62p-sk-binman.dtsi
@@ -74,12 +74,74 @@
filename = "ti-dm/am62pxx/ipc_echo_testb_mcu1_0_release_strip.xer5f";
};
};
+ tifsstub-hs {
+ filename = "tifsstub.bin_hs";
+ ti-secure-rom {
+ content = <&tifsstub_hs_cert>;
+ core = "secure";
+ load = <0x60000>;
+ sw-rev = <CONFIG_K3_X509_SWRV>;
+ keyfile = "custMpk.pem";
+ countersign;
+ tifsstub;
+ };
+ tifsstub_hs_cert: tifsstub-hs-cert.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62px-hs-cert.bin";
+ type = "blob-ext";
+ optional;
+ };
+ tifsstub_hs_enc: tifsstub-hs-enc.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62px-hs-enc.bin";
+ type = "blob-ext";
+ optional;
+ };
+ };
+
+ tifsstub-fs {
+ filename = "tifsstub.bin_fs";
+ tifsstub_fs_cert: tifsstub-fs-cert.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62px-hs-cert.bin";
+ type = "blob-ext";
+ optional;
+ };
+ tifsstub_fs_enc: tifsstub-fs-enc.bin {
+ filename = "ti-sysfw/ti-fs-stub-firmware-am62px-hs-enc.bin";
+ type = "blob-ext";
+ optional;
+ };
+
+ };
ti-spl {
insert-template = <&ti_spl_template>;
fit {
images {
+ tifsstub-hs {
+ description = "TIFSSTUB";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-hs";
+ load = <0x9ca00000>;
+ entry = <0x9ca00000>;
+ blob-ext {
+ filename = "tifsstub.bin_hs";
+ };
+ };
+
+ tifsstub-fs {
+ description = "TIFSSTUB";
+ type = "firmware";
+ arch = "arm32";
+ compression = "none";
+ os = "tifsstub-fs";
+ load = <0x9ca00000>;
+ entry = <0x9ca00000>;
+ blob-ext {
+ filename = "tifsstub.bin_fs";
+ };
+ };
dm {
ti-secure {
content = <&dm>;
@@ -116,7 +178,8 @@
conf-0 {
description = "k3-am62px-sk";
firmware = "atf";
- loadables = "tee", "dm", "spl";
+ loadables = "tee", "dm", "spl",
+ "tifsstub-hs", "tifsstub-fs";
fdt = "fdt-0";
};
};
--
2.34.1
More information about the U-Boot
mailing list