[PATCH 12/13] doc: board: phytec: phycore-am6: Use mtd commands

[Wadim Egorov]

Update Flash to SPI NOR chapter for use with mtd commands.
This is more convenient as we do not have to remember any
offsets in the SPI.

Signed-off-by: Wadim Egorov <w.egorov at phytec.de>
---
 doc/board/phytec/phycore-am62x.rst | 8 ++++----
 doc/board/phytec/phycore-am64x.rst | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst
index f8870657be0..a615d01474e 100644
--- a/doc/board/phytec/phycore-am62x.rst
+++ b/doc/board/phytec/phycore-am62x.rst
@@ -110,13 +110,13 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card.
 
 .. code-block:: bash
 
-  sf probe
+  mtd list
   fatload mmc 1 ${loadaddr} tiboot3.bin
-  sf update $loadaddr 0x0 $filesize
+  mtd write ospi.tiboot3 ${loadaddr} 0 ${filesize}
   fatload mmc 1 ${loadaddr} tispl.bin
-  sf update $loadaddr 0x80000 $filesize
+  mtd write ospi.tispl ${loadaddr} 0 ${filesize}
   fatload mmc 1 ${loadaddr} u-boot.img
-  sf update $loadaddr 0x280000 $filesize
+  mtd write ospi.u-boot ${loadaddr} 0 ${filesize}
 
 
 Boot Modes
diff --git a/doc/board/phytec/phycore-am64x.rst b/doc/board/phytec/phycore-am64x.rst
index a27ad01027b..189da179534 100644
--- a/doc/board/phytec/phycore-am64x.rst
+++ b/doc/board/phytec/phycore-am64x.rst
@@ -111,13 +111,13 @@ tiboot3.bin, tispl.bin and u-boot.img are stored on the uSD card.
 
 .. code-block:: bash
 
-  sf probe
+  mtd list
   fatload mmc 1 ${loadaddr} tiboot3.bin
-  sf update $loadaddr 0x0 $filesize
+  mtd write ospi.tiboot3 ${loadaddr} 0 ${filesize}
   fatload mmc 1 ${loadaddr} tispl.bin
-  sf update $loadaddr 0x80000 $filesize
+  mtd write ospi.tispl ${loadaddr} 0 ${filesize}
   fatload mmc 1 ${loadaddr} u-boot.img
-  sf update $loadaddr 0x280000 $filesize
+  mtd write ospi.u-boot ${loadaddr} 0 ${filesize}
 
 
 Boot Modes
-- 
2.34.1