[PATCH 4/6] usb: gadget: Drop all gadget_is_*() functions
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue Jun 11 09:35:52 CEST 2024
Hi Marek,
Thank you for the patch.
On dim., juin 09, 2024 at 23:32, Marek Vasut <marek.vasut+renesas at mailbox.org> wrote:
> The only actually used gadget_is_*() functions are the one for DWC3
> used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c.
> The DWC3 one should be fixed in some separate patch.
>
> Inline the gadget_is_dwc3() and stop using ifdefs in favor of
> IS_ENABLED() macro.
>
> The rest of gadget_is_*() calls in usb_ep_autoconfig() can never
> be anything but 0, since those gadgets are not supported in U-Boot,
> so remove all that unused code. Remove gadget_chips.h as well.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek at baylibre.com> # on vim3
> ---
> Cc: Alexander Sverdlin <alexander.sverdlin at siemens.com>
> Cc: Felipe Balbi <felipe.balbi at linux.intel.com>
> Cc: Lukasz Majewski <lukma at denx.de>
> Cc: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> Cc: Nishanth Menon <nm at ti.com>
> Cc: Simon Glass <sjg at chromium.org>
> Cc: Thinh Nguyen <Thinh.Nguyen at synopsys.com>
> Cc: Tom Rini <trini at konsulko.com>
> Cc: u-boot at lists.denx.de
> ---
> drivers/usb/gadget/epautoconf.c | 40 +-------
> drivers/usb/gadget/ether.c | 8 +-
> drivers/usb/gadget/gadget_chips.h | 148 ------------------------------
> 3 files changed, 6 insertions(+), 190 deletions(-)
> delete mode 100644 drivers/usb/gadget/gadget_chips.h
>
> diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
> index 0a70035ce04..09950ceeaed 100644
> --- a/drivers/usb/gadget/epautoconf.c
> +++ b/drivers/usb/gadget/epautoconf.c
> @@ -12,7 +12,6 @@
> #include <linux/errno.h>
> #include <linux/usb/gadget.h>
> #include <asm/unaligned.h>
> -#include "gadget_chips.h"
>
> #define isdigit(c) ('0' <= (c) && (c) <= '9')
>
> @@ -222,41 +221,9 @@ struct usb_ep *usb_ep_autoconfig(
> /* First, apply chip-specific "best usage" knowledge.
> * This might make a good usb_gadget_ops hook ...
> */
> - if (gadget_is_net2280(gadget) && type == USB_ENDPOINT_XFER_INT) {
> - /* ep-e, ep-f are PIO with only 64 byte fifos */
> - ep = find_ep(gadget, "ep-e");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> - ep = find_ep(gadget, "ep-f");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> -
> - } else if (gadget_is_goku(gadget)) {
> - if (USB_ENDPOINT_XFER_INT == type) {
> - /* single buffering is enough */
> - ep = find_ep(gadget, "ep3-bulk");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> - } else if (USB_ENDPOINT_XFER_BULK == type
> - && (USB_DIR_IN & desc->bEndpointAddress)) {
> - /* DMA may be available */
> - ep = find_ep(gadget, "ep2-bulk");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> - }
> -
> - } else if (gadget_is_sh(gadget) && USB_ENDPOINT_XFER_INT == type) {
> - /* single buffering is enough; maybe 8 byte fifo is too */
> - ep = find_ep(gadget, "ep3in-bulk");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> -
> - } else if (gadget_is_mq11xx(gadget) && USB_ENDPOINT_XFER_INT == type) {
> - ep = find_ep(gadget, "ep1-bulk");
> - if (ep && ep_matches(gadget, ep, desc))
> - return ep;
> -#ifndef CONFIG_SPL_BUILD
> - } else if (gadget_is_dwc3(gadget)) {
> + if (!IS_ENABLED(CONFIG_SPL_BUILD) &&
> + IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
> + !strcmp("dwc3-gadget", gadget->name)) {
> const char *name = NULL;
> /*
> * First try standard, common configuration: ep1in-bulk,
> @@ -278,7 +245,6 @@ struct usb_ep *usb_ep_autoconfig(
> ep = find_ep(gadget, name);
> if (ep && ep_matches(gadget, ep, desc))
> return ep;
> -#endif
> }
>
> if (gadget->ops->match_ep)
> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
> index e76464e121b..b7b7bacb00d 100644
> --- a/drivers/usb/gadget/ether.c
> +++ b/drivers/usb/gadget/ether.c
> @@ -1989,13 +1989,11 @@ static int eth_bind(struct usb_gadget *gadget)
> * standard protocol is _strongly_ preferred for interop purposes.
> * (By everyone except Microsoft.)
> */
> - if (gadget_is_musbhdrc(gadget)) {
> +
> + if (IS_ENABLED(CONFIG_USB_MUSB_GADGET) &&
> + !strcmp("musb-hdrc", gadget->name)) {
> /* reduce tx dma overhead by avoiding special cases */
> zlp = 0;
> - } else if (gadget_is_sh(gadget)) {
> - /* sh doesn't support multiple interfaces or configs */
> - cdc = 0;
> - rndis = 0;
> }
>
> gcnum = (U_BOOT_VERSION_NUM << 4) | U_BOOT_VERSION_NUM_PATCH;
> diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
> deleted file mode 100644
> index 316051686c4..00000000000
> --- a/drivers/usb/gadget/gadget_chips.h
> +++ /dev/null
> @@ -1,148 +0,0 @@
> -/*
> - * USB device controllers have lots of quirks. Use these macros in
> - * gadget drivers or other code that needs to deal with them, and which
> - * autoconfigures instead of using early binding to the hardware.
> - *
> - * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
> - * some config file that gets updated as new hardware is supported.
> - * (And avoiding all runtime comparisons in typical one-choice configs!)
> - *
> - * NOTE: some of these controller drivers may not be available yet.
> - * Some are available on 2.4 kernels; several are available, but not
> - * yet pushed in the 2.6 mainline tree.
> - *
> - * Ported to U-Boot by: Thomas Smits <ts.smits at gmail.com> and
> - * Remy Bohmer <linux at bohmer.net>
> - */
> -#ifdef CONFIG_USB_GADGET_NET2280
> -#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
> -#else
> -#define gadget_is_net2280(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_AMD5536UDC
> -#define gadget_is_amd5536udc(g) (!strcmp("amd5536udc", (g)->name))
> -#else
> -#define gadget_is_amd5536udc(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_DUMMY_HCD
> -#define gadget_is_dummy(g) (!strcmp("dummy_udc", (g)->name))
> -#else
> -#define gadget_is_dummy(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_GOKU
> -#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
> -#else
> -#define gadget_is_goku(g) 0
> -#endif
> -
> -/* SH3 UDC -- not yet ported 2.4 --> 2.6 */
> -#ifdef CONFIG_USB_GADGET_SUPERH
> -#define gadget_is_sh(g) (!strcmp("sh_udc", (g)->name))
> -#else
> -#define gadget_is_sh(g) 0
> -#endif
> -
> -/* handhelds.org tree (?) */
> -#ifdef CONFIG_USB_GADGET_MQ11XX
> -#define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name))
> -#else
> -#define gadget_is_mq11xx(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_OMAP
> -#define gadget_is_omap(g) (!strcmp("omap_udc", (g)->name))
> -#else
> -#define gadget_is_omap(g) 0
> -#endif
> -
> -/* not yet ported 2.4 --> 2.6 */
> -#ifdef CONFIG_USB_GADGET_N9604
> -#define gadget_is_n9604(g) (!strcmp("n9604_udc", (g)->name))
> -#else
> -#define gadget_is_n9604(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_ATMEL_USBA
> -#define gadget_is_atmel_usba(g) (!strcmp("atmel_usba_udc", (g)->name))
> -#else
> -#define gadget_is_atmel_usba(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_AT91
> -#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
> -#else
> -#define gadget_is_at91(g) 0
> -#endif
> -
> -/* status unclear */
> -#ifdef CONFIG_USB_GADGET_IMX
> -#define gadget_is_imx(g) (!strcmp("imx_udc", (g)->name))
> -#else
> -#define gadget_is_imx(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_FSL_USB2
> -#define gadget_is_fsl_usb2(g) (!strcmp("fsl-usb2-udc", (g)->name))
> -#else
> -#define gadget_is_fsl_usb2(g) 0
> -#endif
> -
> -/* Mentor high speed function controller */
> -/* from Montavista kernel (?) */
> -#ifdef CONFIG_USB_GADGET_MUSBHSFC
> -#define gadget_is_musbhsfc(g) (!strcmp("musbhsfc_udc", (g)->name))
> -#else
> -#define gadget_is_musbhsfc(g) 0
> -#endif
> -
> -/* Mentor high speed "dual role" controller, in peripheral role */
> -#ifdef CONFIG_USB_MUSB_GADGET
> -#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
> -#else
> -#define gadget_is_musbhdrc(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_M66592
> -#define gadget_is_m66592(g) (!strcmp("m66592_udc", (g)->name))
> -#else
> -#define gadget_is_m66592(g) 0
> -#endif
> -
> -#ifdef CONFIG_CI_UDC
> -#define gadget_is_ci(g) (!strcmp("ci_udc", (g)->name))
> -#else
> -#define gadget_is_ci(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_DWC3_GADGET
> -#define gadget_is_dwc3(g) (!strcmp("dwc3-gadget", (g)->name))
> -#else
> -#define gadget_is_dwc3(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_CDNS3_GADGET
> -#define gadget_is_cdns3(g) (!strcmp("cdns3-gadget", (g)->name))
> -#else
> -#define gadget_is_cdns3(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_MAX3420
> -#define gadget_is_max3420(g) (!strcmp("max3420-udc", (g)->name))
> -#else
> -#define gadget_is_max3420(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_MTU3_GADGET
> -#define gadget_is_mtu3(g) (!strcmp("mtu3-gadget", (g)->name))
> -#else
> -#define gadget_is_mtu3(g) 0
> -#endif
> -
> -#ifdef CONFIG_USB_GADGET_DWC2_OTG
> -#define gadget_is_dwc2(g) (!strcmp("dwc2-udc", (g)->name))
> -#else
> -#define gadget_is_dwc2(g) 0
> -#endif
> --
> 2.43.0
More information about the U-Boot
mailing list