[PATCH 3/9] pinctrl: rockchip: rk3588: Fix support for rockchip_get_mux()

Kever Yang kever.yang at rock-chips.com
Fri Jun 14 11:04:18 CEST 2024


Hi Jonas,

On 2024/6/7 18:27, Kever Yang wrote:
>
> On 2024/5/12 20:16, Jonas Karlman wrote:
>> GPIO IOMUX control is located at PMU2_IOC or BUS_IOC offset on RK3588.
>>
>> Based on Linux commit fdc33eba11c5 ("pinctrl/rockchip: add rk3588
>> support").
>>
>> Compared to the Linux commit, this include a fix so that the iomux of
>> GPIO0_B4-D7 is reported correctly.
>>
>> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

I have apply the first 3 patches of this patch for master, and please 
rebase other patches for next.


Thanks,

- Kever

>
> Thanks,
> - Kever
>> ---
>> The fix to report correct iomux for GPIO0_B4-D7 will be sent to Linux.
>> ---
>>   .../pinctrl/rockchip/pinctrl-rockchip-core.c  | 24 ++++++++++++++++++-
>>   1 file changed, 23 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c 
>> b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> index 973e6a4f6db9..efc2070d32d9 100644
>> --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c
>> @@ -14,10 +14,10 @@
>>   #include <linux/libfdt.h>
>>     #include "pinctrl-rockchip.h"
>> +#include <dt-bindings/pinctrl/rockchip.h>
>>     #define MAX_ROCKCHIP_PINS_ENTRIES    30
>>   #define MAX_ROCKCHIP_GPIO_PER_BANK      32
>> -#define RK_FUNC_GPIO                    0
>>     static int rockchip_verify_config(struct udevice *dev, u32 bank, 
>> u32 pin)
>>   {
>> @@ -147,6 +147,28 @@ static int rockchip_get_mux(struct 
>> rockchip_pin_bank *bank, int pin)
>>       if (bank->recalced_mask & BIT(pin))
>>           rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
>>   +    if (IS_ENABLED(CONFIG_ROCKCHIP_RK3588)) {
>> +        if (bank->bank_num == 0) {
>> +            if (pin >= RK_PB4 && pin <= RK_PD7) {
>> +                u32 reg0 = 0;
>> +
>> +                reg0 = reg + 0x4000 - 0xC; /* PMU2_IOC_BASE */
>> +                ret = regmap_read(regmap, reg0, &val);
>> +                if (ret)
>> +                    return ret;
>> +
>> +                ret = ((val >> bit) & mask);
>> +                if (ret != 8)
>> +                    return ret;
>> +
>> +                reg = reg + 0x8000; /* BUS_IOC_BASE */
>> +                regmap = priv->regmap_base;
>> +            }
>> +        } else if (bank->bank_num > 0) {
>> +            reg += 0x8000; /* BUS_IOC_BASE */
>> +        }
>> +    }
>> +
>>       ret = regmap_read(regmap, reg, &val);
>>       if (ret)
>>           return ret;


More information about the U-Boot mailing list